1 |
Hekmat, D. and Fisk, W. J., 1983, “Improving the Energy Efficiency of Residential Clothes Dryers,”NTIS report number LBL 16813
|
2 |
Ruiter, J. P., Leentvaar, G. and Zeylstra, A. H., 1978, “Tumbler Dryer with Heat Pump,” Elektrotechnik, Vol. 56, No. 4, pp. 224-229
|
3 |
Bassily, A. M. and Colver, G. M., 2003, “Performance Analysis of an Electric Clothes Dryer,” Drying Technology, Vol. 21, No. 3, pp. 499-524
DOI
ScienceOn
|
4 |
Bassily, A.M. and Colver, G. M., 2005, “Numerical Optimization of The Annual Cost of a Clothes Dryer,” Drying Technology, Vol. 23, No. 7, pp. 1515-1540
DOI
ScienceOn
|
5 |
Deans J., “The Modeling of a Domestic Tumbler Dryer,” Applied Thermal Engineering, Vol. 21, No. 9,pp. 977-990
|
6 |
Brunzell, L., 2006, “Energy Efficient Textile Drying,” Universitetstryckeriet, Karlstad, 2006.
|
7 |
Byun, D. Y., Baek, S. W. and Kim, M. Y., 2003, “Investigation of Raidative Heat Trnasfer in Complex Geometries using Blocked-Off, Multiblock, and Embedded Boundary Treatments,” Numerical Heat Transfer, Part A, Vol. 43, pp. 807-825
DOI
ScienceOn
|
8 |
Spolek, G. A. and Plumb, O. A., 1981, “Capillary Pressure of Woods,” Wood Science Technology, Vol.15, pp.150-158.
DOI
ScienceOn
|
9 |
Bansal, P. K., Braun, J. E. and Groll, E. A., 2001, “Improving The Energy Efficiency of Conventional Tumbler Clothes Drying Systems,” International Journal of Energy Research, Vol. 25, No. 15, pp. 1315-1332
DOI
ScienceOn
|
10 |
Stanish, M. A., 1986, “The Roles of Bound Water Chemical Potential and Gas Phase Diffusion in Moisture Transport Through Wood,” Wood Science Technology, Vol. 20, pp. 53-70.
DOI
|
11 |
Hekmat, D. and Fisk, W. J., 1984, “Improving the Energy Performance of Residential Clothes Dryers,” The 35th Annual International Appliance Technical Conference, Ohio State University
|
12 |
Beiron, J. and Brunzell, L., 2005, “Energy Efficiency and Drying Capacity of an Unheated or Partially Heated Air Vented Tumble Dryer,” Proceedings of the 3rd Nordic Drying Converence, Karlstad, Sweden.
|
13 |
Conde, M. R., 1997, “Energy Conservation with Tumbler Drying in Laundries,” Applied Thermal Engineering, Vol. 17, pp. 1163-1172.
DOI
ScienceOn
|
14 |
Kissling, H., 1992, “Computer Simulation of a Clothes Tumbler Dryer,” Department of Mechanical Engineering Report, University of Auckland.
|
15 |
Berghel, J., Brunzell, L. and Bengtsson, P., 2004, “Perfomance Analysis of a Tumble Dryer,” Proceedings of the 14th International Drying Symposium IDS2004, Sao Paulo, Brazil, pp. 821-827.
|
16 |
Pang, S., 1996, “Moisture Content Gradient in a Softwood Board during Drying : Simulation from a 2-D Model and Measurement,” Wood Science and Technology, Vol. 30, pp. 165-178.
|
17 |
Smith, T. F., Shen, Z. F. and Friedman, J. N., 1982, “Evaluation of Coefficients for the Weighted Sum of Gray Gases Model,” ASME Journal of Heat Transfer, Vol. 104, pp. 602-608.
DOI
|
18 |
Mujumdar, A. S. and Menon, A. S., 1995, “Drying of Solids : Princiles Classification and Selection of Dryers. In Handbook of Industrial Drying,” Mujumdar A. S. Marcel Dekker, Inc. New York, Vol. 2, pp. 1-40
|
19 |
Haque. M. N., 2007, “Simulation of Temperature and Moisture Content Profiles in a Pinus Radiata Board during High-Temperature Drying,” Drying Technology, Vol. 25, pp. 457-555.
|