• Journal of Korea Society of Waste Management
• /
• v.34 no.7
• /
• pp.685-696
• /
• 2017

This study focuses on computational particle fluid dynamics (CPFD) modeling for the fast pyrolysis of biomass in a conical spouted bed reactor. The CPFD simulation was conducted to understand the hydrodynamics, heat transfer, and biomass fast pyrolysis reaction of the conical spouted bed reactor and the multiphase-particle in cell (MP-PIC) model was used to investigate the fast pyrolysis of biomass in a conical spouted bed reactor. A two-stage semi-global kinetics model was applied to model the fast pyrolysis reaction of biomass and the commercial code (Barracuda) was used in simulations. The temperature of solid particles in a conical spouted bed reactor showed a uniform temperature distribution along the reactor height. The yield of fast pyrolysis products from the simulation was compared with the experimental data; the yield of fast pyrolysis products was 74.1wt.% tar, 17.4wt.% gas, and 8.5wt.% char. The comparison of experimental measurements and model predictions shows the model's accuracy. The CPFD simulation results had great potential to aid the future design and optimization of the fast pyrolysis process for biomass.

• The Korean Journal of Pain
• /
• v.32 no.2
• /
• pp.69-78
• /
• 2019

Pain therapy often entails gastrointestinal adverse events. While opioids are effective drugs for pain relief, the incidence of opioid-induced constipation (OIC) varies greatly from 15% to as high as 81%. This can lead to a significant impairment in quality of life, often resulting in discontinuation of opioid therapy. In this regard, a good doctor-patient relationship is especially pivotal when initiating opioid therapy. In addition to a detailed history of bowel habits, patient education regarding the possible gastrointestinal side effects of the drugs is crucial. In addition, the bowel function must be regularly evaluated for the entire duration of treatment with opioids. Furthermore, if the patient has preexisting constipation that is well under control, continuation of that treatment is important. In the absence of such history, general recommendations should include sufficient fluid intake, physical activity, and regular intake of dietary fiber. In patients of OIC with ongoing opioid therapy, the necessity of opioid use should be critically reevaluated in terms of an with acceptable quality of life, particularly in cases of non-cancer pain. If opioids must be continued, lowering the dose may help, as well as changing the type of opioid. If these measures do not suffice, the next step for persistent OIC is the administration of laxatives. If these are ineffective as well, treatment with peripherally active ${\mu}$-opioid receptor antagonists should be considered. Enemas and irrigation are emergency measures, often used as a last resort.

• Health Policy and Management
• /
• v.31 no.2
• /
• pp.180-187
• /
• 2021

Background: This study analyzed the effect of applying the diagnosis-related group (DRG)-based payment system, which was implemented in July 2012 for hospitals and clinics nationwide, on the cesarean section rate. Methods: The subjects of the study were divided into new groups that participated in the payment system after July 2012 and maintenance groups that participated in the payment system before July 2012. As an analysis method, a difference-in-difference analysis, which is a quasi-experimental design, was used. The risk-adjusted cesarean section rate was used as a dependent variable. Results: Seven risk factors (malpresentation of fetus, eclampsia, multiple pregnancies, problems in the placenta, previous Cesarean section, cephalopelvic disproportion, problems in amniotic fluid) were included in the final risk-adjustment model, and found to have a statistically significant relationship with the cesarean section rate. Results showed that the risk-adjusted cesarean section rate increased significantly in new groups after the application of the DRG-based payment system. Conclusion: Study results provided policy implications for the reorganization of the DRG-based system should that reflects the demands of obstetricians, such as organizing a consultative body with obstetricians and establishing a reasonable fee.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.163-172
• /
• 2022

Purpose: To secure efficient thermal management technology for Li-ion batteries, the applicability of the system applied with single-phase immersion technology was checked through an experiment. Method: Using JH3 pouch cells produced by LG-Chem, Korea, A 14S2P module was manufactured and immersed in a vegetable-based cooling fluid produced by Cargill, USA, and then charged and discharged at a rate of 0.3C to 1C to check the heat distribution. Result: It was possible to manage and there was no change in the molecular structure of the immersion solution. Conclusion: It was confirmed that the immersion cooling method can be applied to the thermal management of Li-ion batteries.

• Journal of the Korean Society of Safety
• /
• v.38 no.2
• /
• pp.8-14
• /
• 2023

In various industrial sites, piping systems play an essential role in stable fluid supply and pressure maintenance. However, these systems are constantly exposed to risks of earthquakes, explosions, fires, and leaks, which can result in casualties or serious economic losses. With rapid advancements in the industry, different-sized piping systems have been launched; however, there are not enough maintenance personnel for troubleshooting and responding to situations where damages occur to piping systems. This increases the need for introducing autonomous damage management systems. In this study, a lab-based piping system was designed and manufactured by referring to the piping system of a naval ship to analyze the effectiveness of autonomous damage management systems. By using this testbed, a representative algorithm, the hydraulic resistance control algorithm, was realized and examinedIn addition, the difference between the averaged pressure and normalized pressure was introduced to improve the performance of the existing algorithm, which faces some limitations with regard to sensor noise and back pressure from the rupture-simulated pipeline part.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.814-819
• /
• 2005

There is growing consciousness of the environmental performance of buildings in Hong Kong. The Buildings Department, the Lands Department and the Planning Department of the Hong Kong Government issued the first of a series of joint practice notes [1] to promote the construction of green and innovative buildings. Green features are architectural features used to mitigate migration of noise and various air-borne pollutants and to moderate the transport of heat, air and transmission of daylight from outside to indoor environment in an advantageous way. This joint practice note sets out the incentives to encourage the industry in Hong Kong to incorporate the use of green features in building development. The use of green features in building design not only improves the environmental quality, but also reduces the consumption of non-renewable energy used in active control of indoor environment. Larger window openings in the walls of a building may provide better natural ventilation. However, it also increases the penetration of direct solar radiation into indoor environment. The use of wing wall, one of the green features, is an alternative to create effective natural ventilation. This paper therefore presents a preliminary numerical study of its ventilation performance using Computational Fluid Dynamics (CFD). The numerical results will be compared with the results of the wind tunnel experiments of Givoni.

• Transactions of the Korean hydrogen and new energy society
• /
• v.35 no.2
• /
• pp.205-215
• /
• 2024

This study introduced a direct contact heat exchanger to enhance the efficiency of polymer electrolyte membrane fuel cells (PEMFCs) systems. According to previous research, 28% of the operating costs of fuel cell systems are attributed to heat exchanger devices, prompting the design of a direct contact heat exchanger to address this issue. Optimal configurations were determined through computational fluid dynamics analysis and experimental device fabrication, and the enhanced heat exchange performance of the heat exchanger was experimentally confirmed. Through this, the contribution of the direct contact heat exchanger to the heat management and efficiency enhancement of PEMFC systems was established.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.11
• /
• pp.1073-1079
• /
• 2012

This study aims to experimentally investigate the heat transfer characteristics of a thermosyphon using nanofluids. A thermosyphon with three individual pipes, which share the internal volume of the evaporator section, was designed, and its performance was tested for various charge amounts, input powers of the evaporator section's heater, and concentrations of working fluids. The optimized charge amount of the thermosyphon using distilled water was 30%, and the thermal resistance of the thermosyphon with $TiO_2$ nanofluid was 18.1% lower than that with Ag nanofluid. In addition, the heat transfer performance of the thermosyphon with $TiO_2-1%$ was optimized at an input power of 300 W at the evaporator section's heater and a charge amount of 30%.

• Korean Chemical Engineering Research
• /
• v.47 no.2
• /
• pp.179-184
• /
• 2009

Recent evolution of computer technology enhances the effectiveness of CFD(Computational Fluid Dynamics) analysis for the 3-dimensional complex transport phenomena including turbulent flows. Cheaper and easier than laser and ultra-sonic methods, the windows simulator name by CAMSI(Computer-Aided Management of Stereo Images) has been developed in order to implement the 3-dimensional image using a disparity histogram extracted from left and right stereo images. In our program using the area-based method, the matching pixel finding methods consist of SSD(Sum of Squared Distance), SAD(Sum of Absolute Distance), NCC(Normalized Correlation Coefficient) and MPC(Matching Pixel Count). On performing the program, stereo images on different window sizes for various matching pixel finding methods are compared reasonably. When the image has a small noise, SSD on small window size is more effective. Whereas there is much noise, NCC or MPC is more effective than SSD. CAMSI from the present study will be much helpful to implement the complex objects and to analyze 3-dimensional CFD around them.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.8
• /
• pp.57-64
• /
• 2016

Initial prevention activities and rapid propagation conditions is the most important to prevent diffusion of water pollution. If water pollutants flow into streams river or main stresm located in environmental conservation area or water intake facilities, we must predict immediately arrival time and the diffusion concentration to the proactive. National Institute of Environmental Research developed water pollution incident response prediction system linking dam and movable weir. the system is mathematical model which is updated daily. Therefore it can quickly predict the arrival time and the diffusion concentration when there are accident of oil spills and hazardous chemicals. Also we equipped with mathematical model and toxicity model of EFDC(Environmental Fluid Dynamics Code) to calculate the arrival time and the diffusion concentration. However these systems offer the services of an offline manner than real-time control services. we have ensured the reliability of data collection and have developed a real-time water quality measurement data transmission device by using the data linkage utilizing a mode bus communication and a commercial SCADA system, in particular, we implemented to be able to do real-time water quality prediction through information infrastructure of the water quality integrated management business created by utilizing the construction of the real-time prediction system that utilizes the data collected, the Open map, the visual representation using charts API and development of integrated management system development based on web maps.