• Nuclear Engineering and Technology
• /
• v.27 no.3
• /
• pp.301-316
• /
• 1995

experimental and computational studies ore carried out to investigate the natural convection of the single phase flow in a tank with a heated horizontal plate facing downward. This is a simplified model for investigations of the influence of a core melt at the bottom of a reactor vessel on the thermal hydraulic behavior in a oater filled cavity surrounding the vessel. In this case the vessel is simulated by a hexahedron insulated box with a heated plate Horizontally mounted at the bottom of the box. The box with the heated plate is installed in a water filled hexahedron tank. Coolers are immersed in the U-type water volume between the box and the tank. Although the multicomponent flows exist more probably below the heated plate in reality, present study concentrates on the single phase flow in a first step prior to investigating the complicated multicomponent thermal hydraulic phenomena. In the present study, in order to get a better understanding for the natural convection characteristics below the heated plate, the velocity and temperature are measured by LDA(Laser Doppler Anemometry) and thermocouples, respectively. And How fields are visualized by taking pictures of the How region with suspended particles. The results show the occurrence of a very effective circulation of the fluid in the whole How area as the heater and coolers are put into operation. In the remote region below the heated plate the new is nearly stagnant, and a remarkable temperature stratification can be observed with very thin thermal boundary. Analytical predictions using the FLUTAN code show a reasonable matching of the measured velocity fields.

• Journal of Life Science
• /
• v.25 no.3
• /
• pp.263-268
• /
• 2015

Coelomocytes are specialized cells that continually and nonspecifically scavenge fluid from the body cavity through endocytosis in Caenorhabditis elegans. Our previous study revealed that coelmocytes were specifically required for dietary-restriction-induced longevity in C. elegans. In the present study, we examined the effect of coelomocyte ablation on the response to environmental stressors and reproduction in C. elegans. Coelomocytes were ablated using diphtheria toxin specifically expressed in coelomocytes. After exposing worms to 20 J/cm²/min of ultraviolet irradiation in vivo, the survival of the worms was monitored daily. To examine their response to heat stress, their survival after 10 h of 35℃ heat shock was measured. Oxidative stress was induced using paraquat, and the susceptibility to oxidative stress was compared between wild-type control and coelomocyte-ablated worms. The total number of progeny produced was counted, and the time-course distribution of the progeny was determined. The worms with ablated coelomocytes showed reduced resistance to ultraviolet irradiation, but the ablation of coelomocytes had no effect on their response to heat or oxidative stress. The number of progeny produced during the gravid period was significantly decreased in the coelomocyte-ablated worms. These findings suggest that coelomocytes specifically modulate the response to ultraviolet irradiation and are required for normal reproduction in C. elegans. The findings could contribute to understanding of the mechanisms underlying dietary-restriction-induced longevity.

• Journal of the Korean Society of Safety
• /
• v.24 no.6
• /
• pp.72-78
• /
• 2009

Exposure to HDI(hexamethylene di-isocyanate) commonly used in vehicle crash repair workshops remains a leading cause of occupational asthma. Although skin and eye contamination are considered as absorption routes, there are no occupational exposure standards for skin and ocular exposure. This is the reason why there are more empirical data should be provided. Therefore this study was to determine contamination levels of HDI on the skin, eyes, work surfaces, respirators and eye protectors. There was evidence of contamination on a variety of work surfaces, for example, door handles, bench top and spray gun, etc. A high proportion(47~80%) of skin wipe samples from neck, forehead, back hand, palm and wrist was positive for HDI contamination, even though spray time was relatively brief. The contamination levels from spraying inside spray booth were generally higher than outside booth due to poor work practices and inappropriate personal protective use like safety gloves. Apprentices had higher exposure levels than the qualified painters, likely due to lack of the recognition of safety and hygiene. The extent of contamination inside the PPE might provide an indication of the potential for respiratory & skin exposure and ocular exposure. Eye fluid samples from 4 out of 14 workers had the positive detection of HDI contamination, due to poor work practices like no or inappropriate eye protection. Considering the potential for dermal & ocular exposure to contribute to possible health symptoms including respiratory sensitization, the empirical data point to a need for improving work practices and appropriate PPE selection, use and maintenance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.669-672
• /
• 2015

Recent Internet of Things (IoT, Internet of Things) that can be applied to various fields as the development of technology has been developed a lot of service and has been developed with the service also for crop management. To manage the essential elements of soil moisture in the crop growth but existing a direct person measuring the fluid point to carry the measuring instrument, if you take advantage of the WPAN (Wireless Personal Area Network) in this paper to manage sensor data, a fixed 3 points (30, 60, 90 cm) and can be managed can be scientifically analyzed the state of growth of the crop. Open field environment is utilized as it is less disturbance of the interference and the frequency of the radio frequency signal of the structure provides a relatively comfortable environment. Therefore, WPAN building and data transmission scheme of the minimum cost is to be developed. In addition, the operation to enter low power mode, the algorithm is necessary because a lot of restrictions on the power supply applied to the sensor nodes and the gateway is constructed in the open field. In the experiment, verifying the effectiveness by using a network configuration of each of the sensor nodes and the gateway, and provides a method for time synchronization of the operation and a low power mode. The study protocol for the RF communication with the LoRa and to enhance communication efficiency is needed in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.1-7
• /
• 2017

In general, the large loads which are applied from explosion, impact, earthquake and wind at a short time caused the materials of structures to large deformations, rotations and strains locally. If such phenomena will be analyzed, hydrocodes which can be considered fluid-structure interaction under computational continuum mechanics are inevitably needed. Also, the explosion mechanism is so complicated, it is reasonable that the behaviors of structure are predicted through explosion analyses and experiment at the same time. But, unfortunately, it is true that explosion experiments are limited to huge cost, large experiment facilities and safety problems. Therefore, in this study, it is shown that the results of explosion analyses using the AUTODYN are agreed with those of existing explosion experiments for reinforced concrete slabs within reasonable error limits. And the explosion damage of the same reinforced concrete slab are assessed for quite different reinforcement arrangement spacings, concrete cover depths, and vertical reinforcements. From the explosion analyses, it is known that the more the ratio of slab thickness to reinforcement arrangement spacing is increased, and small-diameter reinforcements are used than large-diameter reinforcements on the same reinforcement ratio, and vertical reinforcements are used, the more the anti-knock capacities are improved.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.92-116
• /
• 1999

Tomographic approaches to image underground structure using electrical properties, can be divided into DC resistivity, electromagnetic, and radar tomography, based on the operating frequency. DC resistivity and radar tomography methods have been recently applied to site investigation for engineering purpose in Korea. This paper review these two tomography methods, through the case histories acquired in Korea. As another method of borehole radar survey, borehole radar reflection method is included, and its inherent problem and solution are discussed, how to find the azimuth angle of reflector using direction-finding-antenna. Since the velocity anisotropy of radar wave has been commonly encountered in field data, anisotropic radar tomography is discussed in this paper. In DC resistivity tomography, two subjects are focussed, electrode arrays, and borehole effect owing to the conductive fluid in borehole. Using the numerical modeling data, various kinds of electrode ways are compared, and borehole effect is illustrated. Most of the case histories presented in this paper are compared with known geology, core logging data, and/or Televiewer images.

• Proceedings of the Ginseng society Conference
• /
• 1988.08a
• /
• pp.28-32
• /
• 1988

Recently, we isolated a toxic substance named 'toxohormone-L' from ascites fluid of patients with various malignant tumors. The toxohormone-L stimulated lipolysis in rat adipocytes and induced anorexia in rats. Both the lipolytic and the anorexigenic actions of toxohormone-L were found to be inhibited by ginsenoside $Rb_2$ in Korean red ginseng. Isolated rat adipocytes are well known to possess opposite pathways of lipid metabolism: lipolysis and lipogenesis. Both of the metabolism respond to various biologically active substances such as epinephrine, ACTH and insulin. Epinephrine and ACTH stimulate lipolysis and insulin accelerates lipogenesis. Recently. Korean red ginseng powder was found to contain adenosine and an acidic substance which inhibited epinephrine-induced lipolysis and stimulated insulin-mediated lipogenesis from added glucose. The chemical structure of this acidic substance is determined to be pyro-glutamic acid (Pyro-Glu), Pyro-Glu exhibits selective modulations toward the opposite metabolic pathways in rat adipocyte; It inhibits the lipolysis but stimulates the lipogenesis. We call these substances (adenosine, Pyro-Glu) 'selective modulators' or 'insulin-like substances'. Based on these results, physiological significances of these substances in Korean red ginseng were discussed.

• Korean Journal of Food Science and Technology
• /
• v.31 no.6
• /
• pp.1465-1470
• /
• 1999

Aroma was extracted from Applemint(Mentha rotundifolia(L.) Huds) with SDE(simultaneous distillation and extraction), SFE(supercritical fluid extraction) and headspace method and the compounds of aroma were tentatively identified with GC-MS. The functionality of aroma compounds were determined with GC-olfactometry. Total 67 compounds were identified. Among them, 39 compounds were determined from SDE, 42 from SFE and 16 from headspace extract. Many terpene compounds were extracted with SDE and headspace methods but hydrocarbones with SFE. The major constituents of aroma obtained from SDE and SFE, were piperitenone oxide, germacrene-D and trans sabinene hydrate, but those from headspace method were 3-octanol, 1,8-cineol, camphene and benzeneacetaldehyde. Results of sniffing test, determining characteristics and strength of aroma showed that the major constituents of SDE extract were refreshing sweet and apple-like(ethyl-2-methyl butanoate), sweet and fruity-like$({\alpha}-thujene)$, fresh mushroom-like(1-octen-3-ol, 3-octanol), and bitter herb-like$({\delta}-cadidene)$. Major constituents of aroma extracts obtained from headspace method were alcoholic, refreshing sweet and apple-like(ethyl 2-methyl butanoate), unpleasant chemical, and bitter herb and grassy-like(camphene).

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.145-151
• /
• 2016

In response to the cavitation caused by the partial vacuum caused by the fluid flow, a paint was developed by dispersing the lamella-shaped glass-flake in resin for anti-cavitation. This composite paint was developed by using the inorganic filler (lamella shaped glass-flake) and the NBR (Acrylonitrile-butadiene rubber) which was modified epoxy resin. Especially, the glass-flake was a thin film with a thickness of about 100~200 nm and length of about $20{\sim}30{\mu}m$, the aspect ratio was about 200 to 300 times that of the plate-shaped. So the paint for anti-cavitation have shown excellent performance in corrosion resistance. The results of evaluating anti-cavitation performance was below, tensile strength $4.8{\sim}6N/mm^2$ or more, rupture elongation 30% or higher, abrasive speed $10mm^2/h$ or less. In particular, it showed more than twice the superior performance compared to existing advanced foreign products in anti-cavitation performance evaluation.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.412-418
• /
• 2020

This paper produced an automatic fluid management system that can accurately control the specific gravity of etching solution(FeCl₃), and produced a SUS MASK applied to OLED. The target was set at 0.4 mm in diameter of the hole. As a result of this misconception, the etching speed increased when the specific gravity(S.G) value of FeCl₃ was changed from 1.43 to 1.49. And when the weight was 1.49, it was found that the vertical diameter was 0.405 mm, approaching the target. When pressure injection was varied from 2.0kg/cm2 to 3.5kg/cm2, the hole diameter at 3.0 kg/cm2 averaged 0.4mm, matching the target. The characteristics of the change in gravity were analyzed by applying the additive 1.2% and setting the weight at 1.430 by mixing HCl and H2O in FeCl₃ and fixing the injection pressure at 3.0 kg/cm2. When the weight changed from 1.460 to 1.469 the etching speed increased from 0.564 to 0.540. When the weight was 1.467, the hole diameter was measured at 0.4 mm and the target was reached.