• Journal of Environmental Science International
• /
• v.31 no.12
• /
• pp.1103-1115
• /
• 2022

The adsorption characteristics of four pesticides (phosphamidon, fenitrothion, triadimefon, and diniconazole) on natural clinoptilolite (CLI_N) and three synthetic zeolites were investigated. The synthetic zeolites included faujasite (FAU_F) synthesized from coal fly ash; the mixture of FAU and Na-P1 (FAU + Na-P1)_SF synthesized using Jeju scoria and coal fly ash at the ratio of 1.5 by weight; and waste fluid catalytic cracking catalyst (FCC_W). The distribution coefficient, K_D and the Freundlich constant, K_F decreased in the following sequence: FCC_W > FAU_F > (FAU + Na-P1)_SF > CLI_N among the zeolites and diniconazole>fenitrothion> triadimefon> phosphamidon among the pesticides. The pesticide adsorptivity increased with increasing temperature for FAU_F, (FAU+Na-P1)_SF and FCC_W, however, it decreased for CLI_N, regardless of the type of pesticide. The adsorptivity of pesticides was independent of pH for phosphamidon, fenitrothion and triadimefon, whereas it decreased with increasing pH for diniconazole, regardless of zeolite type.

• Applied Chemistry for Engineering
• /
• v.33 no.5
• /
• pp.496-501
• /
• 2022

In this study, an anode material for lithium secondary batteries was manufactured using petroleum-based residual oil, which is a petroleum refining by-product. Among petroleum-based residual oils, pyrolysis fuel oil (PFO), fluidized catalyst cracking-decant oil (FCC-DO), and vacuum residue (VR) were used as carbon precursors. The physicochemical characteristics of petroleum-based residual oil were confirmed through Matrix-assisted laser desorption/ionization Time-of-Flight (MALDI-TOF) and elemental analysis (EA), and the structural characteristics of anode materials manufactured from residual oil were evaluated using X-ray crystallography (XRD) and Raman spectroscopic techniques. VR was found to contain a wide range of molecular weight distributions and large amounts of impurities compared to PFO and FCC-DO, and PFO and FCC-DO exhibited almost similar physicochemical characteristics. From the XRD analysis results, carbonized PFO and FCC-DO showed similar d₀₀₂ values. However, it was confirmed that FCC-DO had a more developed layered structure than PFO in Lc (Length of a and c axes in the crystal system) and La values. In addition, FCC-DO showed the best cycle characteristics in electrochemical characteristics evaluation. According to the physicochemical and electrochemical results of the petroleum-based residual oil, FCC-DO is a better carbon precursor for a lithium secondary battery than PFO and VR.

• Advances in concrete construction
• /
• v.14 no.1
• /
• pp.1-13
• /
• 2022

Due to the physical-chemical characteristics of some bottom ash (BA), there are technical, economic and environmental limitations to find a destination that will add value to it. In Brazil, this residue is eventually used for filling coal extraction pits or remains in sedimentation ponds, creating a susceptible panorama to environmental issues. The geopolymers binders are one of the alternatives to the proper use high amounts of these materials. In this work, geopolymeric binder pastes were produced with BA mixed to activators with different alkali contents (expressed as %Na₂O), as well as the incorporation of soluble silicates (Ms content). The production of binary geopolymeric pastes based on the use of two industrial wastes: fluid catalytic cracking (FCC) and aluminum anodizing sludge (AAS), was also assessed. The content in mass of BA/FCC and BA/AAS ranged from 100/0, 90/10; 80/20 and 70/30. Systems with soluble silicates as activator in a molar ratio SiO₂/Na₂O of 1.0 (Ms = 1.0) and Na₂O content of 15%, showed the best results of mechanical strength (42 MPa at day 28^th). The improvement is up to 5X when compared to NaOH based systems. For systems with partial replacement of BA of 10% of AAS and 20% of FCC (80/20), the presence of soluble silicates was also effective to increase compressive strength.