• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.453-460
• /
• 2005

In this study, the seismic fragility analysis of a base isolated condensate storage tank installed in the nuclear power plant. The condensate storage tank is safety related structure in a nuclear power plant. The failure of this tank affect significantly to the core damage frequency of the nuclear power plants. The seismic analysis of the liquid storage tank was performed by the simple calculation method and the dynamic time storage analysis method. The convective and impulsive fluid mass is modeled as added masses proposed by several researchers. To evaluate the effectiveness of the isolation system, the comparison of HCLPF and core damage frequencies in non-isolated and isolated cases are carried out. It can be found from the results that the seismic isolation system increases the seismic capacity of a condensate storage tank and decreases the core damage frequency significantly.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.975-979
• /
• 1994

The experimental and finite element studies of a coaxial cylindrical shell filled with liquid in the annular gap were performed to understand its vibration characteristics. Finite element analysis was achieved by using ANSYS code. Form the investigation of the changing trend of natural frequencies for the change of annular gap we know that the natural frequency of the coaxial cylindrical shell varies according to the mode shape. that is, in case of in-phase mode the natural frequency decrease as annular gap increase, but in case of out-of-phase mode the natural frequency increase. Finite element analysis results show the excellent agreement with the experimental results both in air and in water case, so that analysis on other cases with be possible without experiment.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.562-577
• /
• 2014

A reliable steady/transient hydro-elastic analysis is developed for flexible (composite) marine propeller blade design which deforms according to its environmental load (ship speed, revolution speed, wake distribution, etc.) Hydro-elastic analysis based on CFD and FEM has been widely used in the engineering field because of its accurate results however it takes large computation time to apply early propeller design stage. Therefore the analysis based on a boundary element method-Finite Element Method (BEM-FEM) Fluid-Structure Interaction (FSI) is introduced for computational efficiency and accuracy. The steady FSI analysis, and its application to reverse engineering, is designed for use regarding optimum geometry and ply stack design. A time domain two-way coupled transient FSI analysis is developed by considering the hydrodynamic damping ffects of added mass due to fluid around the propeller blade. The analysis makes possible to evaluate blade strength and also enable to do risk assessment by estimating the change in performance and the deformation depending on blade position in the ship's wake. To validate this hydro-elastic analysis methodology, published model test results of P5479 and P5475 are applied to verify the steady and the transient FSI analysis, respectively. As the results, the proposed steady and unsteady analysis methodology gives sufficient accuracy to apply flexible marine propeller design.

• 한국식생활문화학회지
• /
• 제23권1호
• /
• pp.33-40
• /
• 2008

Accuracy of dietary assessment depends on correct estimation of quantity as well as correct data on composition of the products. Milk and soymilk were considered quite homogeneous in items of package size and composition. One serving size of fluid milk and soymilk is considered 200 mL but there are products with different amounts on the market. This study was conducted to investigate variations of amounts and composition of fluid milk and soymilk products of one portion siz on Korean market. Twenty-nine milk products were purchased and categorized into 8 groups-regular, low-fat, skim, chocolate, strawberry-flavored, banana-flavored, and black soybean-added. Sixteen fluid soymilk products were purchased and categorized into 4 groups-regular, infant, black sesame or black soybean added and others. Actual volume of each product was measured by mass cylinder and compositions of major nutrients on the package were compared to the values in the most widely used nutrient DB in Korea. Amounts of milk specified on the package of purchased products were 182.3-318.5 ml, the largest being banana-flavored milk. Amounts of soy milk were 184.3-240.5 mL, the largest being regular soymilk. Measured amount of each products were close to the amount on the package (<5%). Contents of macronutrients on the package were different from the food composition table in several products. The amounts of calcium varied greatly among the products due to the popularity of adding calcium to milk and soymilk products recently. These variations in the amount and contents of major nutrients in milk and soymilk products can lead to considerable error to the results of dietary assessment unless the amount and the composition of each product are regularly updated in the food composition table whenever the new products are introduced in the market.

• 분석과학
• /
• 제20권4호
• /
• pp.268-278
• /
• 2007

값이 싸고 효과적인 항 부식제로서 수용성 금속가공유에 첨가되는 아질산염은 수용성 금속가공유에서 미생물 번식을 제어하기 위하여 첨가되는 아민류와 공존 시, 발암성 물질인 니트로소아민류를 생성한다. 본 연구에서는 금속가공, 자동차 부품 제조업 등을 중심으로 현장에서 수거한 금속가공유 원액 및 희석액 중 니트로소 화합물을 생성시키는 아질산염 및 질산염과 에탄올 아민류의 함량을 이온크로마토그라피를 이용하여 분석하고, GC/MS로 분석한 니트로소아민의 분석결과를 비교하여 우리나라 유통 수용성 금속가공유 중 니트로 화합물의 함유실태를 조사하였다. 21개의 금속가공유 희석액 시료 중 11개(52%)의 시료에서 아질산염이 검출되었으며 독일 기준치인 $20{\mu}g/mL$를 초과하는 시료는 3개(14%)였다. 21개의 희석액 중 18개의 희석액에서 니트로소아민(NDELA, N-nitrosodiethanolamine)이 검출되었는데 독일의 권고치인 $5{\mu}g/mL$를 초과하는 시료는 7개(33%)였다. 아질산염의 농도와 NDELA 농도는 $R^2=0.453$, n=19)의 상관성이 관찰되었다.

• 대한기계학회논문집A
• /
• 제35권10호
• /
• pp.1265-1271
• /
• 2011

본 논문에서는 유한요소 모델을 사용한 유체-구조 해석을 통하여 원자력 발전소 임시 받침대의 내진에 대한 안전성을 평가하였다. 임시받침대는 수중에 존재하기 때문에 유체-구조 연성을 통하여 유체의 영향을 고려하였다. 유체의 영향은 구조물의 단위길이당 추가질량으로 정의하여 적용하였다. 각각의 운전기준지진(OBE)과 안전정지지진(SSE)의 설계조건을 층응답스펙트럼(Floor Response Spectrum: FRS)으로 적용하여 진동해석과 내진해석을 수행하였다. 해석된 임시받침대의 최대변위는 운전기준지진에서 0.29mm 이고, 운전정지지진에서 최대변위는 0.36 mm 이다. 최대응력은 운전 기준지진에서 17.9 MPa, 안전정지지진에서 19.6 MPa 이며, 이 값은 재료의 항복강도의 23 %, 14 % 수준이다.

• 대한조선학회논문집
• /
• 제53권4호
• /
• pp.315-328
• /
• 2016

Techniques for determinating hydrodynamic derivatives of underwater tow-fish using CFD(Computational Fluid Dynamics) are described in this paper. Main components of hydrodynamic derivatives are added mass, linear damping and non-linear damping coefficients. In this study, linear and non-linear damping coefficients for translational velocities are settled by CFD analysis. In order to analyze the underwater tow-fish, UlsanFOAM based on open-source CFD code, namely OpenFOAM, is employed. By simulating pitch and yaw angle variation of underwater tow-fish, 6DOF(Degree-of-Freedom) forces and moments are estimated at each attitudes. In order to determinate the hydrodynamic derivatives, curves(forces and moments vs attitude) for CFD results are fitted by least square methods. To demonstrate the applicability of the current approach, two different problems(impulsive side towing and straight towing) are simulated and all results are validated.

• 대한조선학회논문집
• /
• 제55권1호
• /
• pp.56-65
• /
• 2018

Pressure oscillation caused by the compressibility of entrapped air in dam break flow is analyzed using an open source code, which is a two-phase compressible code for non-isothermal immiscible fluids. Since compressible flows are computed based on a pressure-based method, the code can handle the equation of state of barotropic fluid, which is virtually incompressible. The computed time variation of pressure is compared with other experimental and computational results. The present result shows good agreements with other results until the air is entrapped. As the entrapped air bubbles pulsate, pressure oscillations are predicted and the pressure oscillations damp out quickly. Although the compressibility parameter of water has been varied for a wide range, it has no effects on the computed results, because the present equation of state for water is so close to that of incompressible fluid. Grid independency test for computed time variation of pressure shows that all results predict similar period of pressure oscillation and quick damping out of the oscillation, even though the amplitude of pressure oscillation is sensitive to the velocity field at the moment of the entrapping. It is observed that as pressure inside the entrapped air changes quickly, the pressure field in the neighboring water adjusts instantly, because the sound of speed is much higher in water. It is confirmed that the period of pressure oscillation is dominated by the added mass of neighboring water. It is found that the temperature oscillation of the entrapped air is critical to the quick damping out of the oscillations, due to the fact that the time averaged temperature inside the entrapped air is higher than that of surrounding water, which is almost constant.

• Ocean Systems Engineering
• /
• 제9권4호
• /
• pp.423-448
• /
• 2019

Very Large Floating Structures (VLFS) are one among the solution to pursue an environmentally friendly and sustainable technology in birthing land from the sea. VLFS are extra-large in size and mostly extra-long in span. VLFS may be classified into two broad categories, namely the pontoon type and semi-submersible type. The pontoon-type VLFS is a flat box structure floating on the sea surface and suitable in regions with lower sea state. The semi-submersible VLFS has a deck raised above the sea level and supported by columns which are connected to submerged pontoons and are subjected to less wave forces. These structures are very flexible compared to other kinds of offshore structures, and its elastic deformations are more important than their rigid body motions. This paper presents hydroelastic analysis carried out on an innovative VLFS called truss pontoon Mobile Offshore Base (MOB) platform concept proposed by Srinivasan and Sundaravadivelu (2013). The truss pontoon MOB is modelled and hydroelastic analysis is carried out using HYDRAN-XR^* for regular 0° waves heading angle. Results are presented for variation of added mass and damping coefficients, diffraction and wave excitation forces, RAOs for translational, rotation and deformational modes and vertical displacement at salient sections with respect to wave periods.

• 한국해양공학회지
• /
• 제22권5호
• /
• pp.25-30
• /
• 2008

A B-spline based high order panel method was developed for the motion of bodies in an ideal fluid, either of infinite extent or with a free boundarysurface. In this method, both the geometry and the potential are represented by the B-spline, which guarantees more accurate results than most potential based low order methods. In the present work, we applied this B-spline based high order method to the radiation problem of floating bodies. The boundary condition on the free surface was satisfied by adopting a Kelvin-type Green function and irregular frequencies were removed by placing additional control points on the free surface surrounding the body. The numerical results were validated by comparison with existing numerical and experimental results.