• Journal of Korea Entertainment Industry Association
• /
• v.14 no.8
• /
• pp.447-454
• /
• 2020

The purpose of this study was to determine the clinical effects of blood flow regulation exercise for improving patients' health care and its usefulness as a rehabilitation model for various diseases by analyzing and examining the existing literature. A literature review of Korean academic journals published over a 10-year period, from 2010 to 2019, was conducted using words such as "blood flow regulation," "blood flow restriction," "low-intensity exercise," and "Kaatsu." Kaatsu is a blood flow regulation exercise developed in 1966 by Dr. Yoshiaki Sato of Japan. It is an efficient and effective exercise method that uses blood flow regulation bands that increase the secretion of growth hormones to develop muscles within a short time, improves blood circulation and metabolism to prevent and improve adult diseases, shortens the rehabilitation period, and improves cardiovascular function. The study participants consisted of 10 patients, of whom four were elderly, four had obesity, one was a stroke patient, and one was a trauma patient. The results of this study show that the blood flow regulation exercise, which is a low-intensity exercise, has the same effect as high-intensity exercise, which supports the evidence that it is a highly efficient exercise method for muscle development and rehabilitation of the elderly, adolescents, and patients with injuries who have difficulty in general exercising. For future studies, further reviews are necessary to verify the effectiveness of the exercise method according to blood flow regulation site and type of disease.

• Journal of Environmental Impact Assessment
• /
• v.21 no.3
• /
• pp.339-352
• /
• 2012

Total maximum daily load have been implemented and indicated that nonpoint discharge coeffients in flow duration curve were 0.50 of Normal flow duration ($Q_{185}$) and 0.15 of low flow duration($Q_{275}$). By using SWAT, nonpoint discharge coefficients are studied with the conditions of the instream flow and the rainfall in two study areas. The nonpoint discharge coefficient average of BOD and TP for normal flows duration in 3 years are 0.32~0.36 and 0.28~0.31. For the low flow duration, the nonpoint discharge coefficient avergae of BOD and TP were 0.10~0.12 and 0.10~0.11. These are lower than the coefficients of total maximum load regulation. There are big differences between one of regulation and one of SWAT for the normal flow duration. With the consideration of rainfall condition, the nonpoint discharge coefficient of flood flow duration are influenced on the amount of rainfalls. However, the nonpoint discharge coefficients of normal flow duration and low flow duration are not effected by the rainfall condition. Since the spatial distribution and geomorphological characteristics could be considered with SWAT, the estimation of nonpoint discharge coefficient in watershed model is better method than the use of the recommended number in the regulation.

• Journal of The Korean Association of Information Education
• /
• v.24 no.6
• /
• pp.597-606
• /
• 2020

Recently, as students' programming classes are being conducted online, interest in factors that can lead to the success of online programming classes is also increasing. Therefore, in this study, online programming classes were conducted for specialized high school students using a web-based simulation programming tool through TinkerCad. In these online programming classes, students' self-regulation ability and learning flow were set as variables that influence both learning engagement and teaching presence, and the predictive power of each was analyzed. As a result, it was found that both self-regulation ability and learning flow were predictive variables for learning engagement and teaching presence, and that learning flow played a mediating role between self-regulation ability, learning engagement, and teaching presence. This study is meaningful in that it suggested that self-regulation ability and learning flow should be considered more meaningfully in online programming classes, and a practical strategy for this is presented.

• Journal of Biosystems Engineering
• /
• v.21 no.2
• /
• pp.155-166
• /
• 1996

A direct injection sprayer was designed using the concepts of injection mixing and total flow control, flowrate-based system compensating for the variation of forwarding speed. A metered rate, proportionally to the actual diluent flow rate, of a tracer chemical was injected directly into the diluent stream. The injection of chemical may improve the precision and safety of chemical application process. The control system was evaluated for the variables of the control interval, tolerances and sensitivities of flow regulation valve and injection pump. Performance of the system was assessed as that the response time of flow rate, response time of injection rate, absolute steady state error, and the coefficient of variance(C.V.) of concentration were 8.5 and -0.53 seconds, 0.067 lpm(0.8%) and 3.15%, respectively, at optimal parameters of control interval of 1.0 sec, fast sensitivity of flow regulation valve, medium sensitivity of injection pump and medium tolerance of flow rate. Performance of the system can be improved by increasing the sensitivity of flow regulating valve and employing a high resolution velocimeter, such as Doppler radar.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.2031-2042
• /
• 2017

In this paper, a novel traffic flow control method based-on ramp metering and speed regulation using an adaptive sliding mode control (ASMC) method along with a deadzoned parameter adaptation law is proposed at a stochastic macroscopic level traffic environment, where the influence of the density and speed disturbances is accounted for in the traffic dynamic equations. The goal of this paper is to design a local traffic flow controller using both ramp metering and speed regulation based on ASMC, in order to achieve the desired density and speed for the maintenance of the maximum mainline throughput against disturbances in practice. The proposed method is advantageous in that it can improve the traffic flow performance compared to the traditional methods using only ramp metering, even in the presence of ramp storage limitation and disturbances. Moreover, a prior knowledge of disturbance magnitude is not required in the process of designing the controller unlike the conventional sliding mode controller. A stability analysis is presented to show that the traffic system under the proposed traffic flow control method is guaranteed to be uniformly bounded and its ultimate bound can be adjusted to be sufficiently small in terms of deadzone. The validity of the proposed method is demonstrated under different traffic situations (i.e., different initial traffic status), in the sense that the proposed control method is capable of stabilizing traffic flow better than the previously well-known Asservissement Lineaire d'Entree Autoroutiere (ALINEA) strategy and also feedback linearization control (FLC) method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09b
• /
• pp.1147-1149
• /
• 2005

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.10
• /
• pp.961-969
• /
• 2013

In this study, the numerical analysis of a turbulent flow around both a staggered and an inline tube bundle was conducted using ANSYS CFX V.13, a commercial CFD software. The flow was assumed to be steady, incompressible, and isothermal. According to the CFD Best Practice Guideline, the sensitivity study for grid size, accuracy of the discretization scheme for convection term, and turbulence model was conducted, and its result was compared with the experimental data to estimate the applicability of the CFD Best Practice Guideline. It was concluded that the CFD Best Practice Guideline did not always guarantee an improvement in the prediction performance of the commercial CFD software in the field of tube bundle flow.

• Journal of the Economic Geographical Society of Korea
• /
• v.16 no.2
• /
• pp.167-181
• /
• 2013

The cross-border flow of workers in EU having the freedom of labor mobility and residence plays a role in the border labor markets as a structural factor of regulation. The regulation role of the cross-border flow of workers on the Grand R$\acute{e}$gion, which is the border among the France-Belgium-Luxemburg-Germany, is as follows. First, the cross-border flow of workers regulates the regional surplus and lack of labor in quantity and quality. Second, the border labor markets are regulated by the regionally segmented supply and demand of labor and are modulated by the flexible employment like a part-time and temporary employment. Third, the residence of the cross-border workers concentrates on the adjacent regions to the border. And the atypical cross-border workers, who have their residence in the neighboring country but works in the existing country, are rising rapidly.

• Fire Science and Engineering
• /
• v.23 no.6
• /
• pp.16-23
• /
• 2009

The performance characteristics of a smoke damper, which aims to suppress the penetration of smoke to a safe area, have been tested under the regulation of the FIS 001. However, the improvement of the test methods and the regulation has consecutively been requested. From a view-point of fluid mechanical theory, a pressure control damper, that is installed at the end of the flow control system, is important and it dominates flow characteristics in all designed flow systems. In this study, the weak points of the regulation of the FIS 001 concerned with the pressure control damper was visited and the some important characteristics of the damper was examined. Based on these results, it was confirmed that the effects of flow disturbance in the air supplying duct on the performance of the damper are not significant. This results gives some information for the modification of the experimental regulation concerned to the pressure control damper.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.10 no.2
• /
• pp.61-68
• /
• 1985

This paper presents an optimization of distribution for flow & pressure using Primal method derived from network flow theory. The object of the distribution control in this study is press regulation and minimum cost flow. The flow and pressure equations are solved using Primal method.