Browse > Article
http://dx.doi.org/10.14249/eia.2012.21.3.339

Evaluation of Applicability for Nonpoint Discharge Coefficient using Watershed Model  

Lee, Eun Jeong (Department of Environmental Engineering, Cheongju University)
Kim, Tae Geun (Department of Environmental Engineering, Cheongju University)
Publication Information
Journal of Environmental Impact Assessment / v.21, no.3, 2012 , pp. 339-352 More about this Journal
Abstract
Total maximum daily load have been implemented and indicated that nonpoint discharge coeffients in flow duration curve were 0.50 of Normal flow duration ($Q_{185}$) and 0.15 of low flow duration($Q_{275}$). By using SWAT, nonpoint discharge coefficients are studied with the conditions of the instream flow and the rainfall in two study areas. The nonpoint discharge coefficient average of BOD and TP for normal flows duration in 3 years are 0.32~0.36 and 0.28~0.31. For the low flow duration, the nonpoint discharge coefficient avergae of BOD and TP were 0.10~0.12 and 0.10~0.11. These are lower than the coefficients of total maximum load regulation. There are big differences between one of regulation and one of SWAT for the normal flow duration. With the consideration of rainfall condition, the nonpoint discharge coefficient of flood flow duration are influenced on the amount of rainfalls. However, the nonpoint discharge coefficients of normal flow duration and low flow duration are not effected by the rainfall condition. Since the spatial distribution and geomorphological characteristics could be considered with SWAT, the estimation of nonpoint discharge coefficient in watershed model is better method than the use of the recommended number in the regulation.
Keywords
Nonpoint discharge coefficient; SWAT model; TMDL;
Citations & Related Records
연도 인용수 순위
  • Reference
1 국립환경과학원, 2008, 수계오염총량관리기술지침.
2 국립환경과학원, 2006, 금강수계 제2차 수질오염총량관리 기준유량 설정연구.
3 국립환경과학원 금강물환경연구소, 2006, 비점오염모델링 기술을 이용한 유역 오염물질 배출해석.
4 국립환경과학원, 2010, 미국의 TMDLs 수립 안내서.
5 김철겸.김남원, 2008, 충주댐 유역의 오염원에 따른 오염부하량 발생 특성, 한국물환경학회지, 24(4), 465-472.
6 박준대.박주현.류덕희.정동일, 2008, 수질오염 총량관리를 위한 비점배출계수 산정, 한국물환경학회지, 24(4), 452-457.
7 유혜은, 2007, SWAT 모형을 이용한 대청호 유역의 오염물질 유달율 산정, 청주대학교 대학원 석사학위논문.
8 신명철, 2009, 삽교호 유입하천의 비점오염특성 및 오염물질 유달율에 관한 연구, 한서대학교 대학원 석사학위논문.
9 전라북도, 2009, 전라북도 2단계 오염총량관리 기본계획 최종보고서.
10 장재호.윤춘경.정광욱.김형철, 2010, SWAT 모델을 이용한 경안천 유역의 수질관리 영향평가, 한국물환경학회지, 26(3), 387-398.
11 충청북도, 2009, 충청북도 2단계 오염총량관리 기본계획 최종보고서.
12 환경부, 2006 금강수계 오염총량관리 기본방침.
13 한국환경정책.평가연구원, 2002, 비점오염원 유출저감을 위한 우수유출수 관리방안.
14 환경부, 2006, 비점오염원 업무편람.
15 US EPA(1977). Technical Guidance manual for Developing Total Maximum Daily Loads.
16 Neithsch, S. L., Arnold, J. G., Kiniry, J. R. and Williams, J. R., 2001, Soil and Water Assessment Tool; The theoretical documentation, U.S. Agricultural Research Service.
17 Feyen, L., Vazquez, R., Christianens, K., Sels, O. and Feyen, J., 2000, Application of distributed physically-based hydrological model to a medium size catchment. Hydrology abnd Earth System Science, 4(1), 47-63.   DOI
18 Karim C. Abbaspour, Jing Yang, Ivan Maximov, Rosi Siber, Konrad Bogner, Johanna Mieleitner, Juerg Zobrist, and Raghavan Srinivasan, 2006, Modelling hydrology and water quality in the pre-alpine/alpine Thur watershed using SWAT. Hydrology, 333, 413-430.
19 Migliaccio, K. W., Chaubey, I., and Haggard, B. E., 2006, Evaluation of landscape and instream modeling to predict watershed nutrient yields. Environmental Modeling and Software, 22, 987-999.
20 Mahesh Sahu, and Roy R, Gu., 2009, Modeling the effects of riparian buffer zone and contour strips on stream water quality. Ecological Engineering, 35, 1167-1177.   DOI   ScienceOn