• 한국가시화정보학회지
• /
• 제19권2호
• /
• pp.63-73
• /
• 2021

It is essential to accurately predict the change in water level, velocity, and flow rate for each passage of the grit chamber according to the operating conditions of the pump. In this study, VOF multiphase flow analysis was performed, and the flow characteristics of the grit chamber were predicted. As a result of simulations, the sedimentation phenomenon after the entrance of the grit chamber channel is expected to occur on the side walls. When 6 channels are used, the average speed of the channels is about 52% of the design standard, and when 4 channels are used, the value increases to 74% of the design standard. The average water level in the channels tends to decrease as the flow velocity increases, and the water level in the absorption well with a larger flow rate is maintained lower than that in the absorption well with a smaller flow rate.

• 소음진동
• /
• 제10권5호
• /
• pp.873-879
• /
• 2000

Experimental investigation was conducted to study the effects of pitch angle maximum camber on the performance and noise of an axial-flow fan used in outdoor-unit of air -conditioner. For this study the axial-flow fan whose pitch angle can be varied was made and the Specific sound Pressure Level and other coefficients were measured using the anechoic fan tester. It is found that pitch angle affects more severly than the maximum camber on the fan performance. On the while the maximum camber affects much on the specific sound power level. Present results show that it is important to choose the optimum pitch angle and maximum camber to design the high-performance and low-noise axial-flow fan and specific noise measured in the anechoic fan tester can be sued effectively for the design of low-noise fan.

• 대한한방내과학회지
• /
• 제29권1호
• /
• pp.258-264
• /
• 2008

Objectives : The aim of this study was to confirm the characteristics of oral malodor patients by evaluating the differences of salivary flow rate, secretory immunoglobulin A (sIgA) level in saliva between the patient and control groups, and the correlation with the tongue coating, volatile sulfur compound (VSC), salivary flow rate and sIgA level in saliva in the patients group. Methods : Forty-seven patients with oral malodor and twenty healthy volunteers were included in this study. Their tongue coating was assessed with the Winkel tongue coating index, and salivary flow rate, sIgA concentrations in saliva and the level of VSC in oral cavity were measured. Results : There were no significant differences of the salivary flow rate and the sIgA level in saliva between the patient and control groups, but there was a significant relationship between the accumulation of tongue coating and the level of VSC in oral cavity. Conclusions : Our results suggest that tongue coating is closely related to oral malodor, but further studies are needed to confirm the relationship between tongue coating and sIgA level in saliva.

• 한국융합학회논문지
• /
• 제9권2호
• /
• pp.171-176
• /
• 2018

본 연구는 스마트 사이니지를 실제 일정한 공간에 설치하여 상호작용성 수준(고 vs. 저)과 플로우 수준(고 vs. 저)에 따라 미디어 인게이지먼트와 광고 인게이지먼트 뿐 아니라 어떠한 정보를 기억하는지와 관련한 기억 효과까지 실증적으로 분석하였다. 48인치 스마트 사이니지를 실제 대학 구내에 설치하여 실험 연구로 진행하였다. 연구 결과 상호작용성과 인게이지먼트 수준이 모두 높은 경우 모두 낮은 경우보다 광고 인게이지먼트는 높게 나타났다. 또한 상호작용성 수준이 낮고 플로우 수준이 높은 경우 미디어 인게이지먼트가 높게 나타났다. 마지막으로 상호작용성 수준이 낮고 플로우 수준이 높으면 비평가적인 속성 정보를 종합적인 평가 정보에 비해 많이 기억하여 회상하였으며, 스마트 사이니지의 상호작용성이 높고 사용자의 플로우가 낮으면 태도적인 평가적 회상 정보를 더 많이 회상하는 것으로 나타났다. 향후 스마트 사이니지 전략에 있어 상호작용성을 무조건 높이는 전략보다는 사용자 플로우를 높이기 위한 세부적인 전략이 필요할 것이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2401-2405
• /
• 2008

In the present study, a three-dimensional least square/level set based two-phase flow code was developed for the simulation of three-dimensional sloshing problems using finite element discretization. The present method can be utilized for the analysis of a free surface flow problem in a complex geometry due to the feature of FEM. Since the finite element method is employed for the spatial discretization of governing equations, an unstructured mesh can be naturally adopted for the level set simulation of a free surface flow without an additional load for the code development except that solution methods of the hyperbolic type redistancing and advection equations of the level set function should be devised in order to give a bounded solution on the unstructured mesh. From the numerical experiments of the present study, it is shown that the proposed method is both robust and accurate for the simulation of three-dimensional sloshing problems.

• 한국해안해양공학회지
• /
• 제17권3호
• /
• pp.158-165
• /
• 2005

Level Set방법을 사용하여 액체와 기체의 서로 다른 상을 함께 해석하는 연구를 수행하였다. Level Set함수는 상의 경계면에서부터 부호를 갖는 거리함수로 정의되며,계산 격자에서 함수 값의 부호에 따라 각 상을 구분하고 물성치를 부여한다. 본 논문에서는 비압축성 유체의 보존식에 Level Set함수의 이동식을 연계하여 이상유동을 모사하는 지배방정식을 구성하였으며, 이를 pseudo-compressibility 방법으로 함께 풀었다. 이 때 다양한 문제에 적용이 가능하도록 일반 곡선 좌표계에서 식을 유도하였고, 수치해석을 위한 행렬식들을 함께 유도하였다. 개발된 해석 코드를 표면장력이 있는 기포 동역학 문제와 수중익에 의한 파도 발생 문제에 적용하여 타당한 결과를 얻을 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.802-805
• /
• 2007

The exhaust system, including a muffler, is one of the major sources to generate the radiated noise of construction equipment. The muffler is generally known that it reduces the exhaust noise level, but it sometimes increases the noise level because of the flow effect inside a muffler. So, it is required to consider the flow effect inside a muffler to reduce the exhaust noise level of construction equipment. In this paper, an experimental method to consider a quantitative flow effect inside a muffler was set up through a series of tests. Finally, the experimental result was verified through the flow noise analysis using CFD analysis result. These results make it possible to understand the dynamic characteristics of the flow noise and to design the low noise muffler for the construction equipment.

• 한국전산유체공학회지
• /
• 제6권3호
• /
• pp.19-26
• /
• 2001

An Eulerian-Lagrangian method, so called immersed boundary method, is used for analysing viscous flow around arbitrary bodies, where governing equations are discretized on a regular grid by using a finite volume method. To improve the accuracy of flow near body boundaries, a second-order accurate interpolation scheme is used and a level-set based grid deformation method is presented to construct the adaptive grids around body boundaries. The present scheme is used to simulate steady flow around a semicircular cylinder mounted on the bottom of flow domain and calculated results are validated by results of a body fitted grid method. Finally, present method is applied to a complex flow around multi body and the usefulness is checked by investigating calculated results.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 Proceedings of The 6th korea-china joint workshop on nuclear waste management
• /
• pp.253-257
• /
• 2005

This research aims to demonstrate the regional and site scale groundwater flow simulation for the high level radioactive disposal research site in Yu-seong. We used the Modflow by a finite difference method for groundwater flow simulation, and Modpath module in Modflow package for particle tracking simulation. The range of numerical domain for regional groundwater flow model is $16.32km{\times}20.16km$. And, the depth of numerical domain was expanded to 6,000m. The area of numerical domain for the site scale groundwater flow simulation is $1.6km{\times}1.6km$. Since 2005, the underground research tunnel(URT) is being constructed at KAERI(Korea Atomic Energy Research Institute) site. In the site scale groundwater flow model, the groundwater flow around the KAERI site is simulated. And the change of groundwater level with tunnel excavation is also predicted.

• 한국유체기계학회 논문집
• /
• 제20권1호
• /
• pp.5-14
• /
• 2017

A fan-motor assembly in a vacuum cleaner is analyzed through system-level analysis method. This system consisted of three components, a fan, motor, and the flow resistance of the motor, or of the vacuum cleaner. System-level analysis method is characterized by the combination of torque matching at a constant throttling condition between the fan and the motor and the pressure drop at a constant flow rate due to the flow resistance of the motor, or of the vacuum cleaner. The performance characteristics of the fan-motor assembly and the vacuum cleaner system could be predicted over the whole range of operation, based on the characteristics of each component. The predicted performance of the vacuum cleaner system through system-level analysis agreed well with the experimental results within 4.5% difference of pressure and 6% difference of the efficiency. The effect of flow resistance of a motor is investigated and it is found that the efficiency decrease of fan-motor assembly at the constant flow rate due to the flow resistance of a motor is determined by the flow resistance ratio(FRR), which is defined as a ratio of flow resistance of motor and the flow resistance of a constant throttling condition of a given point. The fan-motor assembly(S2 model) was modified to reduce the FRR from 9.0% to 2.4% and the experimental result shows that the efficiency of S2 model was improved by about 3% at best efficiency point.