• 한국자동차공학회논문집
• /
• 제3권5호
• /
• pp.47-55
• /
• 1995

Cylindrical chokes are used widely as components of hydraulic equipments. The dynamic charac teristics between flowrate and pressure drop through the cylindrical chokes were discussed by the frequency characteristics of the chokes. It was assumed no pressure recovery occured at the downstream neighborhood of the choke. The pulsating jetflow from outlet of cylindrical chokes shows very complex behaviours which are quite different from the steady jetflow but it is not clarified quantitatively. In order to utilize the chokes as a flowmeter, it is indispensable to discuss the estimation of the dynamics of pressure drop in the downstream jetflow region of cylindrical chokes. In this experimental study, the dynamic behaviours of the jetflow in the downstream region of cylindrical chokes are investigated precisely by using flow visualization. In the results of experimental sutdy, it is clarified that the retachment length depended on pressure wave is compared with it depended on velocity wave.

• Membrane and Water Treatment
• /
• 제13권5호
• /
• pp.219-225
• /
• 2022

5th Assessment Report of the Intergovernmental Panel on Climate Change Weather (AR5) predicts that recent severe hydrological events will affect the quality of water and increase water pollution. To analyze changes in water quality due to future climate change, input data (precipitation, average temperature, relative humidity, average wind speed, and solar radiation) were compiled into a representative concentration curve (RC), defined using 8.5. AR5 and future use are calculated based on land use. Semi-distributed emission model Calculate emissions for each target period. Meteorological factors affecting water quality (precipitation, temperature, and flow) were input into a multiple linear regression (MLR) model and an artificial neural network (ANN) to analyze the data. Extensive experimental studies of flow properties have been carried out. In addition, an Acoustic Doppler Velocity (ADV) device was used to monitor the flow of a large open channel connection in a wastewater treatment plant in Ho Chi Minh City. Observations were made along different streams at different locations and at different depths. Analysis of measurement data shows average speed profile, aspect ratio, vertical position Measure, and ratio the vertical to bottom distance for maximum speed and water depth. This result indicates that the transport effect of the compound was considered when preparing the hazard analysis.

• Geomechanics and Engineering
• /
• 제27권5호
• /
• pp.433-445
• /
• 2021

Artificial ground freezing (AGF) is a commonly used geotechnical support technique that can be applied in any soil type and has low environmental impact. Experimental and numerical investigations have been conducted to optimize AGF for application in diverse scenarios. Precise simulation of groundwater flow is crucial to improving the reliability these investigations' results. Previous experimental research has mostly considered horizontal seepage flow, which does not allow accurate calculation of the groundwater flow velocity due to spatial variation of the piezometric head. This study adopted vertical seepage flow-which can maintain a constant cross-sectional area-to eliminate the limitations of using horizontal seepage flow. The closure time is a measure of the time taken for an impermeable layer to begin to form, this being the time for a frozen soil-ice wall to start forming adjacent to the freeze pipes; this is of great importance to applied AGF. This study reports verification of the reliability of our experimental apparatus and measurement system using only water, because temperature data could be measured while freezing was observed visually. Subsequent experimental AFG tests with saturated sandy soil were also performed. From the experimental results, a method of estimating closure time is proposed using the inflection point in the thermal conductivity difference between pore water and pore ice. It is expected that this estimation method will be highly applicable in the field. A further parametric study assessed factors influencing the closure time using a two-dimensional coupled thermo-hydraulic numerical analysis model that can simulate the AGF of saturated sandy soil considering groundwater flow. It shows that the closure time is affected by factors such as hydraulic gradient, unfrozen permeability, particle thermal conductivity, and freezing temperature. Among these factors, changes in the unfrozen permeability and particle thermal conductivity have less effect on the formation of frozen soil-ice walls when the freezing temperature is sufficiently low.

• 한국산학기술학회논문지
• /
• 제13권12호
• /
• pp.6159-6166
• /
• 2012

수자원에서 특히 중요한 홍수기에 대한 유량 측정은 어려움이 있고 모든 하천에 대한 지속적인 유량측정은 현재 시스템상에서는 불가능하다. 그래서 유량의 생산을 위해서 그동안 수위유량 관계 곡선이 사용되어 왔다. 하지만 수위-유량 관계 곡선은 그 편리성에도 불구하고 수위와 유량만의 관계를 사용하므로 정확성 면에서 항상 문제가 있어왔다. 따라서 본 연구에서는 Chiu의 엔트로피 개념의 2차원 유속공식을 사용하여 새로운 평균유속공식을 유도하였다. 본 공식은 수심, 중력가속도, 동수경사, 에너지경사, 동점성 계수 등 하천의 수리적 특성을 잘 반영하고 최대유속도 산정할 수 있다. 또한 최대유속과 평균유속사이의 선형관계를 검증할 수 있었고 그 결과로써 하천단면의 특성을 잘 나타내는 평형상태의 ${\phi}(M)$을 산정하였다. 평형상태의 ${\phi}(M)$을 사용하여 평균유속을 산정하였고 이를 바탕으로 유량을 산정하였다. 본 공식의 검증을 위해서 고리형 특성을 보이는 부정류 상황에서의 실험실 측정 데이터를 사용하여 계산된 유량과 실측된 유량을 비교하였고 그 결과는 매우 잘 일치함을 알 수 있었다. 향후 다양한 실험실 데이터 및 하천 데이터를 이용하여 연구가 지속되어 진다면 수자원 분야에 널리 이용될 것으로 판단된다.

• 대한토목학회논문집
• /
• 제36권4호
• /
• pp.627-635
• /
• 2016

최근 해양 및 항만지역의 매립을 통하여 주거공간, 산업단지, 농업용지 등의 부지를 확보하는 공사가 다수 진행되고 있다. 해상 매립공사에서 매립 재료의 물량산정은 공사 원가를 결정하는 중요한 요소이다. 그러나 흐름조건을 고려한 정량적 유실률 산정에 관한 국내 연구는 부족한 실정이며, 주로 현장여건하에서 매립토 재료적 특성 및 종류에 따른 경험적 방법에 의존하고 있다. 본 연구에서는 수리실험을 통하여 기존의 연구와는 달리 흐름조건과 재료의 특성을 고려하여 유실률을 평가하였다. 5가지 유입 흐름 조건과 비중이 다른 일반모래와 안트라사이트 두 가지 재료를 이용하여, 직사각형 수로($13.0m{\times}5.0m{\times}0.10m$)에 원형 호안을 설치하여 수리실험을 수행하였다. 두 가지 재료 모두 입경 Froude number가 증가함에 따라 유실률이 증가하는 경향을 보였다. 또한, 접근유속(u)이 각 재료의 한계유속($u_c$)보다 높을 때, 일반모래는 7.4%, 안트라사이트는 24.4%로 유실률이 급격히 증가하는 것으로 나타났다. 향후 보다 세밀한 유입조건에 따른 유실률을 산정한다면 보다 정밀한 유실량 산정이 가능할 것이다.

• Water Engineering Research
• /
• 제1권2호
• /
• pp.95-105
• /
• 2000

A method is presented which enables easily the computation of the suspended sediment discharge as the mean sediment concentration and mean flow velocity. This method has significant advantages over the traditional method, which principally depend on a set of measured concentration data. The method is based on both a new sediment concentration and mean sediment concentration equations which have been derived from the entropy concept used in statistical mechanics and information theory: (1) The sediment concentration distribution equations derived, are capable of describing the variation of the concentration in the vertical direction. (2) The mean concentration equation derived, is capable of calculating easily the mean concentration by using only one measured concentration in open channel. The present study mainly addresses the following two subjects : (1) new sediment concentration and mean sediment concentration equations are derived from the entropy concept : (2) An efficient and useful method of suspended sediment-discharge measurements is developed which can facilitate the estimation of suspended sediment-discharge in open channel. Flume and laboratory data are used to carry out the research task outlined above. An efficient method for determining the suspended sediment-discharge in the open channel has been developed. The method presented also is efficient and applicable in estimating the sediment transport in rivers and the sediment deposit in the reservoirs, and can drastically reduce the time and cost of sediment measurements.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2009년도 학술발표회 초록집
• /
• pp.1306-1310
• /
• 2009

The roughness coefficients were estimated by the Manning's equation for the measured stage and flow velocity of Bocheong stream basin in Kum river. The relationships between the estimated roughness coefficients and the geomorphologic factors were formulated by the linear, logarithmic, exponential and power type function, thereafter correlation equations were presented. The correlation analysis was performed between the measured stream length and the basin area of Bocheong stream basin by the linear, logarithmic, exponential and power type function, and correlation equation for the stream length was given. The roughness coefficient has strong correlationship with stream slope, but low correlation coefficients with stream length and basin area. For the correlationship with the roughness coefficients and the stream slope, the logarithmic type function has the smallest correlation coefficient, on the other hand, the exponential type function has the largest correlation coefficient. For the relationship between the stream length and the basin area, the correlation coefficient of the logarithmic type function shows the smallest value, linear type function shows the largest value.

• 대한토목학회논문집
• /
• 제29권6B호
• /
• pp.537-542
• /
• 2009

수위만의 함수로 작성되는 기존의 수위-유량관계곡선식을 개선하기 위하여 비교적 쉽게 취득할 수 있는 하천의 폭, 넓이, 윤변, 하상경사 등 기본적인 수리특성인자를 활용하고 확률론적 방법인 엔트로피 기법을 연계하여 하천 유량을 산정할 수 있는 방법을 제안하였다. 평균유속과 최대유속과의 관계를 분석하여 하천의 평형상태를 나타내는 엔트로피 함수를 도출하고, 이를 활용하여 하천 수리특성 인자가 반영된 유속공식으로 하천유량을 산정하는 방법이다. 캐나다 알버타 대학 등에서 제공된 수리실험실 및 자연하천 수문자료를 활용하여 유량을 산정한 결과 기존 수위-유량관계곡선식에서 추정된 유량에 비해 오차가 작고 실측치에 근사하여 개선효과가 큰 것으로 분석되었다.

• International Journal of Fluid Machinery and Systems
• /
• 제9권1호
• /
• pp.66-74
• /
• 2016

Concerning the numerical simulation of high-speed water jet with intensive cavitation this paper presents a practical compressible mixture flow method by coupling a simplified estimation of bubble cavitation and a compressible mixture flow computation. The mean flow of two-phase mixture is calculated by URANS for compressible fluid. The intensity of cavitation in a local field is evaluated by the volume fraction of gas phase varying with the mean flow, and the effect of cavitation on the flow turbulence is considered by applying a density correction to the evaluation of eddy viscosity. High-speed submerged water jets issuing from a sheathed sharp-edge orifice nozzle are treated when the cavitation number, ${\sigma}=0.1$, and the computation result is compared with experimental data The result reveals that cavitation occurs initially at the entrance of orifice and bubble cloud develops gradually while flowing downstream along the shear layer. Developed bubble cloud breaks up and then sheds downstream periodically near the sheath exit. The pattern of cavitation cloud shedding evaluated by simulation agrees experimental one, and the possibility to capture the unsteadily shedding of cavitation clouds is demonstrated. The decay of core velocity in cavitating jet is delayed greatly compared to that in no-activation jet, and the effect of the nozzle sheath is demonstrated.

• 한국환경과학회지
• /
• 제6권5호
• /
• pp.541-550
• /
• 1997

해양의 몇몇 정점에서 관측된 유속자료로부터 속도 유선함수를 최소자승 회귀분석법을 응용하여 산출하였다. 유선함수는 삼각함수의 합으로 표현되며 이들 함수의 상수들은 2차원 유속장의 비발산 부분을 최소화하여 구하였다. 위의 방법은 기존의 방법들이 요구하는 관측치의 보강이 필요치 않으며 관측 및 흐름장의 발산에 기인하는 오차를 계산할 수 있는 장점이 있다. 연안역의 복잡한 해안경계 문제를 쉽게 표현하기 위하여 연안을 경계로 하는 곡선직교좌표를 도입하여 유선함수를 구하였다. 텍사스-루이지아나 대륙붕 순환 및 수송 연구(LATEX)를 위하여 31개 정점에서 관측된 해류계자료를 이용 텍사스-루이지아나 대륙붕상의 속도유선함수를 성공적으로 산출하였다. 위의 해역에서 유선함수 산출오차는 비교적 적게 나타나 유선함수가 표층 유속장을 잘 나타냄을 알 수 있다.