• Journal of the Economic Geographical Society of Korea
• /
• v.14 no.2
• /
• pp.116-128
• /
• 2011

Some subway passengers may want to have their fresh vegetables purchased through internet at a service facility within the subway station of the Metropolitan Seoul subway system on the way to home, which raises further questions about which stations are chosen to locate service facilities and how many passengers can use the facilities. This problem is well known as the pickup problem, and it can be solved on a traffic network with traffic flows which should be identified from origin stations to destination stations. Since flows of the subway passengers can be found from the smart card transaction database of the Metropolitan Seoul smart card system, the pickup problem in the Metropolitan Seoul subway system is to select subway stations for the service facilities such that captured passenger flows are maximized. In this paper, we have formulated a model of the pickup problem on the Metropolitan Seoul subway system with subway passenger flows, and have proposed a fast heuristic algorithm to select pickup stations which can capture the most passenger flows in each step from an origin-destination matrix which represents the passenger flows. We have applied the heuristic algorithm to select the pickup stations from a large volume of traffic network, the Metropolitan Seoul subway system, with about 400 subway stations and five millions passenger transactions daily. We have obtained not only the experimental results in fast response time, but also displayed the top 10 pickup stations in a subway guide map. In addition, we have shown that the resulting solution is nearly optimal by a few more supplementary experiments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.983-989
• /
• 2013

The current research reviewed the design conditions that would maximize the efficiency of the hybrid collector that combines in one unit "cyclone-inertial impaction-bag filter". The computational analysis for the shape of cyclone entry predicts that a design that installs the guide vane at the entry of the tangential type cyclone brings a high-rpm and powerful vortex, very effective in promoting the deflection of coarse particles from the streamline at the cyclone. As the lower part of the cyclone is venturi-shaped, however, a strong flow downward of 4 to 5 m/sec persists through the lower part of the hopper, revealing the likely reentrainment of collected dust. And the removal of the venturi at the lower part of the cyclone would solve the problem of the reentrainment of collected dust. The acceleration of the flow velocity through the adjustment of the gap of the collision baffle would increase the effect of collision, but as the interference with the dust separation is expected, the original design should be kept for the baffle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.155-167
• /
• 2016

Technology valuation is necessary for determining the feasibility of technology commercialization. However, existing methods focus only on technology evaluation, with limitation in sufficiently reflecting buyer viewpoint. In addition, it causes a gap between estimated value and market value. Therefore, this research suggests a new technology valuation method which focuses on the perspectives of buyers. Technology factors, buyer factors and market factors are first determined and their relationships are analyzed. Second, based on the relationships, profit projections are calculated using the discount cash flow method. Finally, profit projections for each year are discounted. The proposed method was applied using the ubiquitous home network system and audio service and illumination control method and results compared with the value of a technology valuation guide distributed by the Ministry of Trade, Industry and Energy. The technology valuation approach used in this research is quantitative and systematic and can be used as a decision making support tool in technology transfer, reflecting various perspectives of stakeholders.

• International Journal of Highway Engineering
• /
• v.6 no.4 s.22
• /
• pp.13-24
• /
• 2004

The Marshall mix design method used in Korea, which was described in the design & construction regulation, had been introduced from Japan Highway Cooperation standard guide. Most engineers have thought that it is the major reason that causes pavement distresses. Therefore, there is a need to modify the current Marshall mix design through using the volumetric design concept, which is most widely used in asphalt mix design. The modified mix design determines the preliminary optimum asphalt content at 4% VTM (Voids in Total Mix). If the Marshall properties, which are VFA, VMA, stability, and flow, were satisfied with the requirements, the preliminary optimum asphalt content is determined as the final optimum asphalt content. The modified Marshall mix design considers VMA. while the current Marshall mix design does not consider VMA. By considering the Marshall stability and flow as the criteria instead of design factors, the modified Marshall mix design is able to decrease the errors occurred in Marshall stability test The test was performed to compare the Marshall properties between current and modified Marshall mix design. The left results showed that there was no difference in the Marshall properties, except for VTM. Thus, the modified Marshall mix design can produce the asphalt mixtures with the constant VTM (4%), and it can improve the asphalt mixture quality in Korea.

• Journal of The Korean Association For Science Education
• /
• v.32 no.5
• /
• pp.1007-1026
• /
• 2012

The purpose of this study was to develop analytic framework for dialogic argumentation to show the context and flow visualizing interactions of argumentation, to be able to present quality of argumentation specifically. For this, we formulated a method of the argumentation diagram using feature of diagram simple and structurally visualizing interrelation between argument components, and then quantified quality of argumentation to argument level score on this basis. We have developed the learning material for argumentation about a vertical circular motion and used the obtained translations from applying it in developing the framework. We chose argument statements among full transcript and then coded as Toulmin's argument components, and these codes was effectively arranged and linked to show argumentation diagram. Results by argumentation diagram could be useful understanding of interactive argumentation context and the flow and present frequency, the combination of argument elements, rough qualitative level of argumentation. To quantify argumentation quality, we gave different scores to different link lines reflecting indication of argumentation quality like that diversity of argument component, justification, presence or absence of rebuttals. The process of identification of argument level is very simple, qualitative level of argumentation represented as concrete score could present various and concrete argument level. Developed analytic framework might contribute to argumentation research field, because it can present effectively dialogic argumentation result. Also, various analysis cases might guide designing an effective argumentation practice and circular motion learning.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.4
• /
• pp.326-335
• /
• 2014

Aerodynamic characteristics of the small two-stage turbo blower were investigated using commercial CFD tool(ANSYS CFX Ver. 14.5) in this paper. Turbo blower, which is a centrifugal type of turbomachinery, is used in various industries. It is used for application that required high static pressure rising at relatively small volumetric flow rate. In order to understand the mechanism of static pressure rising, the aerodynamic characteristics of the small two-stage turbo blower are analyzed at high rotating speed in this study. The k-${\omega}$ SST turbulence model, which is good at prediction of adverse pressure gradient flows, was applied. The CFD results of the turbo blower are validated by performance test. The static pressure rising of the turbo blower is nonlinearly increased over the first stage and the second stage. The secondary flow occurred at guide vanes, between the casing and the first impeller shroud, and the bottom of the impeller disk. As a result, It is required that whole fluid area is analyzed to predict aerodynamic characteristics of small two-stage turbo blower. and the result should be selected with considering for error from experiment and CFD.

• Journal of Korean Society of Forest Science
• /
• v.110 no.3
• /
• pp.419-430
• /
• 2021

This study investigated spatiotemporal trends of sediment-related disasters in North Korea from 1960 to 2019 and post-disaster recovery cases based on a literature review and satellite images. Results showed that occurrence status of sediment-related disasters was initially externally reported in 1995 (during the Kim Jongil era); their main triggering factor was heavy summer rainfall. Furthermore, forest degradation rate was positively correlated with population density (R² = 0.4347, p = 0.02) and occurrence number of sediment-related disasters was relatively high on the west coast region, where both variables showed high values. This indicates that human activity was a major cause of forest degradation and thus, significantly affected sediment-related disasters in mountain regions. Finally, sediment- related disasters due to shallow landslides, debris flow, and slow-moving landslides were observed in undisturbed forest regions and human-impacted forest regions, including terraced fields, opencast mines, forest roads, and post-wildfire areas, via satellite image analysis. These disaster-hit areas remained mostly abandoned without any recovery works, whereas hillside erosion control work (e.g., treeplanting with terracing) or torrent erosion control work (e.g., check dam, debris flow guide bank) were implemented in certain areas. These findings can provide reference information to expand inter-Korean exchange and cooperation in forest rehabilitation and erosion control works of North Korea.

• Journal of the Korea Computer Graphics Society
• /
• v.28 no.3
• /
• pp.79-89
• /
• 2022

With the popularity and the advanced graphics hardware technology of mobile devices, various mobile applications that help children with physical activities have been studied. This paper presents SandUp, a mobile application that guides the play of building sand castles using artificial intelligence and augmented reality(AR) technology. In the process of building the sandcastle, children can interactively explore the target virtual sandcastle through the smartphone display using AR technology. In addition, to help children complete the sandcastle, SandUp informs the sand shape and task required step by step and provides visual and auditory feedback while recognizing progress in real-time using the phone's camera and deep learning classification. We prototyped our SandUp app using Flutter and TensorFlow Lite. To evaluate the usability and effectiveness of the proposed SandUp, we conducted a questionnaire survey on 50 adults and a user study on 20 children aged 4~7 years. The survey results showed that SandUp effectively helps build the sandcastle with proper interactive guidance. Based on the results from the user study on children and feedback from their parents, we also derived usability issues that can be further improved and suggested future research directions.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.1
• /
• pp.3293-3301
• /
• 1974

An experimental work was conducted by using a laboratory-made model dryer to investigate the effect of the rate of natural forced-air on the drying rate of rough rice which was deposited in the deep-bed. The dryer consisted of 8 cylinderical containers with grain holding screen at their bottoms, each of which having 30cm in diameter and 15cm in height. The containers were sacked vertically with keeping them air-tight by using paper tape during dryer operation. Two separate layers of containers were operated in the same time to have two replications. The moisture contents of grains within each bins after predetermined period of dryer operation were determined indirectly by measuring the weight of the individual containers. The air-rates were maintained at 6 levels, or 5, 8, 10, 15, 18 and 20 millimenters of static head of water. The roomair conditions during dryer operation were maintained in the range of 10-l5$^{\circ}C$ in temperature and 40-60% in relative humidity. The results of the study are summarized as follows: 1. Drying characteristics of the grains in the bottom layers were approximately the same regardless of airdelivery rates, giving the average drying rate as about 0.35 percent per hour after 40-hour drying period, during which moisture content (w. b.) reduced from 24 percent to about 10 percent. 2. After about 40-hour drying period, the mean drying rates increased from 0.163 percent per hour to 0.263 percent per hour as air-flow rates increased from 5mm to 87.16mm of static head of water. In the same time, the moisture differences of grains between lower and upper layers varied from 12.7 percent at the air rate of 5mm of water head to 7.5 percent at the air-flow rate of 20mn of water head. Thus, the greater the air-flow rate was, the more overall improvement in drying performance was. Additionally, from the result of ineffectiveness of drying grain positioned at 70cm depth or above by the air rate of 5mm of static head of water it may be suggested in practical application that the height of grain deposit would be maintained adequately within the limits of air-rates that may be actually delivered. 3. Drying after layer-turning operation was continued for about 30 hours to test the effectiveness of reducing moisture differences in the thick layers. As a result of this layer-turning operation, moisture distribution through layers approached to narrow ranges, giving the moisture range as about 7 percent at air-flow rate of 5mm head of water, about 3 percent at 10mm head about 2 percent at 15mm head, and less than 1 percent at 20mm head. In addition, from the desirable results that drying rate was rapid in the lower layers and dully in the upper layers, layer-turning operation may be very effective in natural air drying with deep-layer grain deposit, especially when the forced air was kept in low rate. 4. Even though the high rate of air delivery is very desirable for deep-layer natural-air drying of rough rice, it can be happened that the required air delivery rate could not be attained because of limitation of power source available on farms. To give a guide line for the practical application, the power required to perform the drying with the specified air rate was analyzed for different sizes of drying bin and is given in Table (5). If a farmer selects a motor of which size is 1 or {{{{1 { 1} over {2 } }}}} H.P. and air-delivery rate which ranges from 8~10mm of head, the diameter of grain bin may be suggested to choose about 2.4m, also power tiller or other moderate size of prime motor may be recommended when the diameter of grain bin is about 5.0m or more for about 120cm grain deposit.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.3
• /
• pp.116-128
• /
• 2017

In this study, the original scenery of Baegun-dong Garden in Gangjin was compared with that of the reconstructed site to suggest directions for restoration in the future. The diachronic prototype scenery of the Baegun-dong Garden was derived by integrating the elements of the original and contemporary prototype sceneries from the old poetry series. The old poetry series is comprised of "Baegun-dong 8Yeong(詠)" by Lee Damro(李聃老), "Baegun-dong 10Su(首)" by Song Ikhwi(宋翼輝), "Baegun-dong 12Gyeong (景)" by Jeong Yakyong(丁若鏞), and "Baegun-dong 14Gyeong" by Lee Siheon (李時憲). Guidance for directions for future restoration was suggested through a comparative analysis between the diachronic prototype scenery of Baegun-dong Garden and the current scenery of the restored site. The research result is as follows. First, the prototype scenery of Baegun-dong Garden was a harmonic view composed of the camellia forest road, 'Baegun-dong' the letter carved on a rock, a cliff 'Changhabyeok(蒼霞壁)' the red letter written by Jeong Yakyong, paulownia trees, waterfalls and a maple forest. Outside the Byeolseo(別墅), there were a red plum blossom forest, a pine forest, and a bamboo forest, as well as the view of Okpanbong(玉版峯) from Jeongseondae(停仙臺). In the yard, there were Chwimiseonbang(翠微禪房), Jug-gak(竹閣), Pyeongsang(榻), a lotus Bangji(方池), Gogsugeo(曲水渠) and Hwagye(花階). Cranes were even raised in the yard. Second, comparing the diachronic prototype scenery of Baegun-dong Garden with its restored site, following a restoration guide is suggested. There should be more water flow in Baegun-dong Valley and Jug-gak should be restored. 'Changhabyeok' the red letter should be carved on the stone wall. Trees should be controlled for a better view of Okpanbong from Jeongseondae. More trees and plants, such as red plum blossom, pine tree, paulownia trees, azaleas(映山紅), chrysanthemum, orchid, daffodil, and lotus should be planted in the yard. A system of integrated guide boards is also required for effective information transmission for visitors.