• Journal of Yeungnam Medical Science
• /
• v.8 no.1
• /
• pp.63-71
• /
• 1991

Noninvasive techniques for antenatal detection of the fetal development and well-being such as biophysical profile, non-stress and stress test remain major challenges in modem obstetric practice. To obtain and analyze umbilical artery velocity waveform by pulsed-wave doppler ultrasound, a total of 160 determinations were carried out on 157 normal pregnant women between 16th to 41st week gestation. The ratio of peak systolic to end-diastolic flow velocity(S/D ratio), pulsatility index and resistance index were measured as indices of the resistance in feto-placental circulation. The results were as follows : As gestation advances, the, mean values for peak systolic and end-diastolic velocities raised progressively. As gestation advances, the mean values for the S/D ratio declined progressively, exhibiting high diastolic flow velocity caused by low resistance. Pulsatility index, and resistance index were also declined progressively, as gestation advances. The analysis of umbilical artery blood flow velocity waveforms provides a new noninvasive technique to evaluate fetal development and well-being, and may be expected a reliable method for assessment of fetal life.

• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.475-491
• /
• 2021

With the recent increase in available high-resolution (< ~1 m) satellite SAR images, the demand for precise registration of SAR images is increasing in various fields including change detection. The registration between high-resolution SAR images acquired in different look angle is difficult due to speckle noise and geometric distortion caused by the characteristics of SAR images. In this study, registration is performed in two stages, coarse and fine, using the x-band SAR data imaged at staring spotlight mode of TerraSAR-X. For the coarse registration, a method combining the adaptive sampling method and SAR-SIFT (Scale Invariant Feature Transform) is applied, and three rigid methods (NCC: Normalized Cross Correlation, Phase Congruency-NCC, MI: Mutual Information) and one non-rigid (Gefolki: Geoscience extended Flow Optical Flow Lucas-Kanade Iterative), for the fine registration stage, was performed for performance comparison. The results were compared by using RMSE (Root Mean Square Error) and FSIM (Feature Similarity) index, and all rigid models showed poor results in all image combinations. It is confirmed that the rigid models have a large registration error in the rugged terrain area. As a result of applying the Gefolki algorithm, it was confirmed that the RMSE of Gefolki showed the best result as a 1~3 pixels, and the FSIM index also obtained a higher value than 0.02~0.03 compared to other rigid methods. It was confirmed that the mis-registration due to terrain effect could be sufficiently reduced by the Gefolki algorithm.

• Journal of Korean Society of Forest Science
• /
• v.113 no.3
• /
• pp.339-348
• /
• 2024

Debris flow is a typical type of mountainous sediment disaster that can cause widespread damage to both lives and property, making it essential to understand its behavioral characteristics for effective prevention. In this study, pre- and post-event Light Detection And Ranging(LiDAR) data from the Dosan-ri area in Bonghyeon-myeon, Yeongju-si, Gyeongsangbuk-do, Republic of Korea where debris flows occurred in 2023, were used to calculate the actual affected area and terrain change volume caused by the debris flow. These calculated values were then compared with those derived from the numeric simulation model, Morpho2DH, based on field surveys and laboratory investigation data. Additionally, the model's applicability was assessed by conducting cross-sectional elevation analyses based on the extent of the affected area and comparisons of the results. The findings indicate that the debris flow affected area and terrain change volume estimated by the Morpho2DH model were approximately 152% and 178% higher, respectively, compared to the LiDAR-based results. Pearson correlation analysis of the cross-sectional elevation changes showed a positive correlation, with Pearson Correlation Coefficients(PCC) of at least 0.65

• Korean Journal of Veterinary Research
• /
• v.38 no.4
• /
• pp.818-822
• /
• 1998

The persistence of porcine epidemic diarrhea virus(PEDV) infection was demonstrated in 7 swine farms employing continuous pig flow management even after seasonal outbreaks. Clinically, sporadic postweaning diarrhea was a major concern in those farms. Subsequently circulatory antibody detection using serum neutralizing test made useful for confirmation of PEDV persistent infections. The persistence of PEDV in the premise might have induced recurrence over the period of time.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.2
• /
• pp.11-18
• /
• 1995

Error detection in ARQ(Automatic Repeat Request) protocols is very important in wireless data communication systems. The throughput efficiency of ARQ protocols can be improved by dynamically adapting the protocol packet length so that it approaches the optimum value for throuhput efficiency. In this paper, a simple and novel adaptive packet length allocation method is proposed which transmits the packets with variable length by dyanmically estimating the channel codition. The simulation results show that the average of throughput is improved by 315.4% in the stop-and-wait protocol, 41.4% in the go-back-N protocol and 155.9% in the selective repeat protocol respectively. And the throughput performances of adaptive packet length allocation method approximately approach the theoritically optimal throughput performances.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.5
• /
• pp.351-356
• /
• 2018

Commonly, a live-line alarm can be used to measure the electric field strength of a high-voltage system to calculate its current, but it is hard to detect the electric field of shielded cables or concealed structures, such as underground distribution cables. Current sensors can detect the magnetic field in a single core wire, but they cannot determine the magnetic field about a double-core wire because the currents flow in opposite directions. Therefore, it is very difficult to detect certain current problems, such as a fault current in an extension line comprised of a double line. In this paper, to ultimately develop a sensor that can detect the current regardless of line conditions, we used a simulation to determine the concentration of the magnetic field dependent on the distribution of the external magnetic field and the path of each line's core.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.5
• /
• pp.352-359
• /
• 1987

The cycloconverter operating on a circulating current-free mode has many zero crossing points. If an exact zero crossing points are not detected, the three phase-unbalanced currents will flow in a motor. In this paper, the current feedback using a current reference wave is proposed to improve the problems of zero crossing detection, three phase-unbalanced voltages, currents, and torgue ripples. To prevent the saturation of the air gap flux and keep the torque constant, the constant voltage / hertz control with IR compensation is adopted. The PI-controller is designed using the linearized model of the cycloconverterinduction motor system. Alsi, Z-80A single board computer has been used to implement the proposed scheme which results in the performance improvement of cycloconterter-fed induction motor speed control system.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.315-319
• /
• 2007

This paper presents a algorithm, what is able to recognize 4 different continuous human motion using a single stationary camera as input. For the first step, we acquire images from a camera. To enhance the image, we perform preprocessing which deals with removing noise using median filter, thresholding. And then morphological operations are performed to remove which small blobs and eliminates small holes. At the forth step, blobs are analysed to extracts for foreground region. Then, motions are predicted from these images by using optical flow technique, and the predicted motion data are refined by comparing our cardboard models so as to judge behavior pattern.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.2
• /
• pp.337-343
• /
• 2012

This work investigates the vibrational characteristics of the underground gas pipelines. Experiments were conducted to analyze the effects of various parameters on the vibrational characteristics from the emergency detection point of view. Influences of the various types of impact exerted on the pipe, height of free fall and measuring locations were analyzed. Especially, the difference between the vibrational signal generated by the direct impact on the pipe and the ambient noise was successfully identified. To validate the experimental observation, computer simulation was also performed with constant properties(elasticity, fluid velocity and internal pressure) which are directly conjectured from the accompanying experiment with a real pipe system.

• Journal of Welding and Joining
• /
• v.4 no.2
• /
• pp.47-52
• /
• 1986

Friction Welds are formed by the mechanisms of diffusion as well as mechanical inter-locking. The severe plastic flow at the interface by the forge action of the process brings the subsurface so close together that detection of any unbounded area becomes very difficult. No reliable method is available so fat to determine the weld quality nondestructively. The paper presents an attempt to determine weld strength quantitatively using the ultrasonic pulseecho method. The new approach calculates the coefficient of reflection based on measured amplitudes of the echoes. This coefficient provides a single quantitative measurement which involves both acoustic energy reflected at the welded interface as well as transmitted across the interface. As a result, it was known that the quantitative relationship between the coefficient and the weld strength (torsional strength) could be drawn.