• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권5호
• /
• pp.1829-1846
• /
• 2021

Transient faults occur in computation units of a processor, which can cause control flow errors (CFEs) and compromise system reliability. The software-based methods perform illegal control flow detection by inserting redundant instructions and monitoring signature. However, the existing methods not only have drawbacks in terms of performance overhead, but also lack of configurability. We propose a configurable approach CCFCA for detecting CFEs. The configurability of CCFCA is implemented by analyzing the criticality of each region and tuning the detecting granularity. For critical regions, program blocks are divided according to space-time overhead and reliability constraints, so that protection intensity can be configured flexibly. For other regions, signature detection algorithms are only used in the first basic block and last basic block. This helps to improve the fault-tolerant efficiency of the CCFCA. At the same time, CCFCA also has the function of solving confusion and instruction self-detection. Our experimental results show that CCFCA incurs only 10.61% performance overhead on average for several C benchmark program and the average undetected error rate is only 9.29%. CCFCA has high error coverage and low overhead compared with similar algorithms. This helps to meet different cost requirements and reliability requirements.

• 정보처리학회논문지B
• /
• 제14B권4호
• /
• pp.241-248
• /
• 2007

본 논문은 광학 흐름을 추정하는데 있어서 최적 정규화 매개변수를 결정하기 위한 L-curve 모서리 검출 방법을 제안한다. 기존의 곡률법은 L-curve의 곡률 그래프에서 최대 위치를 찾는 반면, 제안한 방법은 바로 우측 음의 계곡과의 곡률 차가 최대가 되는 양의 봉우리의 위치를 찾아서 매개변수 값을 결정한다. 이 방법으로 선정한 매개변수로 광학 흐름을 추정하면, 평균적으로 최소 오차로부터 단지 0.02 pixel/frame 차이가 나는 것이 실험을 통하여 보여진다. 또한 제안한 방법으로 기존의 모서리 검출법인 곡률법이나 적응 제거법에 비해 최소 오차에 가장 가까운 광학 흐름을 구할 수 있었다.

• 한국군사과학기술학회지
• /
• 제22권6호
• /
• pp.763-772
• /
• 2019

There is a need to use sheath flow nozzle to detect bioaerosol such as virus and bacteria due to their characteristics. In order to enhance the detection performance depending on nozzle parameters, numerical analysis was carried out using a commercial code, ANSYS CFX. Eulerian-lagrangian approach method is used in this simulation. Multiphase flow characteristics between primary fluid and solid were considered. The detection performance was evaluated based on the results of flow field in nozzle chamber such as focusing efficiency and swirl strength. In addition, Latin hypercube sampling(LHS) of design of experiment(DOE) was used for generating a near-random sampling. Then, the acceleration section is optimized using response surface method(RSM). Results show that the optimized model achieved a 6.13 % in a focusing efficiency and 11.47 % increase in swirl strength over the reference model.

• 한국정보통신학회논문지
• /
• 제26권7호
• /
• pp.963-971
• /
• 2022

상수도 관망은 국가 수도 시설의 주요한 구성 요소이지만 대부분이 지중에 매립되어 있어 배관의 노후화 정도 및 누수를 파악하기 어려우므로 유지관리 하기가 매우 어렵다. 본 연구에서는 관망에 설치된 다양한 센서 조합을 가정하여, 데이터 조합에 따른 관로 누수 판별 가능성을 검토하기 위하여 선형회귀분석, 뉴로퍼지 등의 인공지능 알고리즘을 통한 유량과 압력 예측을 실시하여 최적 알고리즘을 도출하였다. 공급압력 예측을 통한 누수판별의 경우 뉴로퍼지 알고리즘이 선형회귀분석에 비하여 우수하였다. 누수유량 예측에서는 뉴로퍼지를 이용한 유량예측이 우선 고려되어야 한다. 다만, 유량을 모사하기 힘든 경우에는 선형 알고리즘을 이용한 공급압력 예측이 이루어져야 할 것으로 사료 된다.

• 대한기계학회논문집B
• /
• 제22권11호
• /
• pp.1564-1570
• /
• 1998

In-situ particle monitors(ISPMs) are widely used for monitoring contaminant particles in vacuum-based semiconductor manufacturing equipment. In the present research, the performance of a Particle Measuring Systems(PMS) Vaculaz-2 ISPM at subatmospheric pressures has been studied. We created uniform upstream conditions of particle concentration and measured the detection efficiency, the lower detection limit, and the size response of the ISPM using uniform sized methylene blue aerosol particles. The effect of particle size, particle velocity, particle concentration, and system pressure on the detection efficiency was examined. Results show that the detection efficiency of the ISPM decreases with decreasing chamber pressure, and with increasing mass flow rate. The lower detection limit of the ISPM, determined at 50 % of the measured maximum detection efficiency, was found to be about $0.15{\sim}0.2{\mu}m$, which is similar to the minimum detectable size of $0.17{\mu}$ given by the manufacturer.

• 대한기계학회논문집B
• /
• 제34권4호
• /
• pp.355-364
• /
• 2010

주위 매질의 움직임에 반응하는 섬유상 감지모는 대부분의 생물체에 존재하여 침입자를 감지하는 역할을 한다. 이 기능을 모방한 인공 감지모의 가능한 작동영역 및 응답특성을 파악하기 위하여 인공유동센서의 수학 모델에 대한 매개변수 해석을 수행하고, 각 변수들의 영향을 고찰하였다. 진동성분을 갖는 복합 공기 유동장에서 감지모의 길이 및 직경이 기계적인 감도와 주파수 응답을 결정하는 주요 인자인 것으로 나타났다. 감지모의 길이에 따라 각속도, 각속도, 각가속도를 감지할 수 있는 주파수 영역이 달라질 수 있는 것으로 나타났다. 또한 항력 및 가상 질량에 의한 토크가 매우 작지만 감지모의 움직임에 매우 큰 영향을 나타냈다. 감지모의 길이 및 직경이 증가함에 따라 공진 주파수는 감소하는 것으로 나타났다.

• Composites Research
• /
• 제18권1호
• /
• pp.10-15
• /
• 2005

RTM 공정의 성공적인 수행을 위해 프리폼의 삽입 후 혹은 삽입 전의 상태를 점검하는 과정은 매우 유용하다. 이를 위해 기체를 주입하여 유량과 압력 측정을 통해 프리폼의 투과성 계수를 측정하고 결함을 탐지하는 기법이 최근 연구되어 왔다. 본 논문에서는 이 기법을 소개하고 적용성을 검토해 본다.

• Structural Monitoring and Maintenance
• /
• 제7권1호
• /
• pp.59-67
• /
• 2020

This study aims to develop the fuzzy risk assessment model of the debris flow to verify the accuracy of risk assessment in order to help related organizations reduce losses caused by landslides. In this study, actual cases of landslides that occurred are utilized as the database. The established models help us assess the occurrence of debris flows using computed indicators, and to verify the model errors. In addition, comparisons are made between the models to determine the best one to use in practical applications. The results prove that the risk assessment model systems are quite suitable for debris flow risk assessment. The reproduction consequences of highlight point discovery are shown in highlight guide coordinating toward discover steady and coordinating component focuses and effectively identified utilizing these two systems, by examining the variety in the distinguished highlights and the element coordinating.

• 한국멀티미디어학회논문지
• /
• 제21권8호
• /
• pp.829-836
• /
• 2018

This study attempts to detect a shot boundary in films(or dramas) based on the length of a sequence. As films or dramas use scene change effects a lot, the issues regarding the effects are more diverse than those used in surveillance cameras, sports videos, medical care and security. Visual techniques used in films are focused on the human sense of aesthetic therefore, it is difficult to solve the errors in shot boundary detection with the method employed in surveillance cameras. In order to define the errors arisen from the scene change effects between the images and resolve those issues, the mixed algorithm based upon color histogram, edge histogram, and optical flow was implemented. The shot boundary data from this study will be used when analysing the configuration of meaningful shots in sequences in the future.

• International Journal of Computer Science & Network Security
• /
• 제22권2호
• /
• pp.413-423
• /
• 2022

The NHIS provides free or highly subsidized healthcare to all people by providing financial fortification. However, the financial sustainability of the scheme is threatened by numerous factors. Therefore, this work sought to provide a solution to process claims intelligently. The provided Petri net model demonstrated successful data flow among the various participant. For efficiency, scalability, and performance two main subsystems were modelled and integrated - data input and claims processing subsystems. We provided smart claims processing algorithm that has a simple and efficient error detection method. The complexity of the main algorithm is good but that of the error detection is excellent when compared to literature. Performance indicates that the model output is reachable from input and the token delivery rate is promising.