• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2015년도 춘계학술대회
• /
• pp.18-20
• /
• 2015

우리나라 항구 주변에는 입 출항하는 선박으로 인하여 해상교통흐름이 복잡하다. 이러한 선박통항의 안전과 효율성을 증진하기 위해 우리나라에서는 해상교통관제 서비스를 시행하고 있다. 24시간 쉴 틈이 없는 해상교통 관제사들의 노력에도 불구하고 관제구역 내에서의 충돌사고는 지속적으로 발생하고 있으며, 위험 상황이 약 20분에 1회씩 발생하고 있는 것으로 분석되어 그 위험성은 크다고 할 수 있다. 이에 본 연구는 부산항관제 VHF채널을 3일간 청취하여, 교신내용을 분석하였다. 부산항관제 교신 중 통항에 관련된 사항을 충돌위험도 모델에 적용하여 위험도로 표현하였으며, 관제사들이 선박에게 권고 지시를 하는 시점의 위험도를 도출하였다. 충돌위험도 모델의 위험도는 관제사가 관제시의 의사결정을 지원하는 하나의 수단으로 이용될 수 있다.

• 한국염색가공학회지
• /
• 제10권2호
• /
• pp.1-7
• /
• 1998

In this study, PET fabric was hydrolyzed with NaOH using the Tank m/c and Liquor-flow m/c to determine the alkali hydrolysis properties of PET fabrics. The results were as follows ： The weft density and tensile strength of PET fabrics hydrolyzed with Liquor-flow m/c were higher than those hydrolyzed with Tank m/c in case of less than 10％ of weight loss. However, above 10％ of weight loss, reverse phenomenon was showed. K/S value of hydrolyzed PET with Liquor-flow m/c was higher than that with Tank m/c above 10％ of weight loss. It was observed that the micropores of PET surface were collapsed due to physical force(abrasion and collision) during hydrolysis. Bending rigidity of hydrolyzed PET fabric was about 32％ and 40％ of bending rigidity of warp and weft direction of untreated fabric at 7％ of weight loss, respectively. Above 7％ of weight loss, decrease rate was decreased.

• 한국재료학회지
• /
• 제13권5호
• /
• pp.328-332
• /
• 2003

Characteristics of $TiO_2$nanoparticles controlled by precursor flow rate and reaction temperature in chemical vapor condensation process were interpreted in the view of decisive reaction factors, i.e. supersaturation ratio, concentration of vapor molecule, collision frequency and rate, and residence time, which directly affect the particle size and size distribution in CVC reactor. As results, the increases of precursor flow rate and reaction temperature induced the increase in the average sizes of $TiO_2$ nanoparticles in CVC reactor by acceleration of coagulation growth due to the increase of collision between $TiO_2$vapor molecules and particles. The effects of reaction factors on the characteristics of$TiO_2$nanoparticles were discussed with considering particle formation process in CVC reactor under given process parameters.

• 한국전산유체공학회지
• /
• 제16권2호
• /
• pp.66-74
• /
• 2011

The SCR catalyst in coal-fired power plant is eroded by the collision of fly ash on the catalyst surface. However the erosion of SCR catalyst by the collision of fly ash has not been fully studied, especially in terms of fluid dynamics. Hence, in the present study, we focus on the gas and solid flows inside the SCR catalyst duct and their consequent effect on the erosion characteristics. For this purpose, computational fluid dynamics is applied to investigate the two-phase flows and to evaluate the erosion rate for different flow and particle injection conditions. Also, the erosion rate and pressure drop of commonly used square shape are compared with equilateral triangle and hexagon shapes. The pressure drop of SCR catalyst is increased when SCR catalyst surface area per unit volume increases. The erosion rate of SCR catalyst is enhanced when the particle velocity, mass flow rate of particle, particle diameter and cell density of SCR catalyst are increased. From the results, the pressure drop and erosion rate at the catalyst surface can be minimized by reducing cell density of SCR catalyst to decrease particle velocity and number of particle impacts.

• 한국분무공학회지
• /
• 제1권3호
• /
• pp.51-59
• /
• 1996

An experiment was carried out on the structure of twin spray from pressurize-swirl nozzles, in order to investigate the effect of different size of spray nozzles on the characteristics of the overlap of two single sprays, for example, mean diameter, number density, and spatial distribution of flow rate. Using image processing method, the distributions of size and velocity of droplets of a single spray and twin spray were measured and compared to investigate the overlapping effect of two identical sprays. Comparing experimental results from a twin-spray with those from two-single sprays shows that the flow rate distribution of the twin-spray was concentrated around the midst of the overlapping region of two sprays. In this region, Sauter mean diameter (SMD) did not change much in the twin spray from 6032 nozzles, but it was smaller by 10 micrometers in the twin-spray than two-single sprays from 60063 nozzles. In spite of large difference in Weber numbers of the colliding sprays between the 60063 and 6032 nozzles, the phenomena did not have a big change in the overlapping region of twin spray. This shows that in the collision between droplets from two single spray in the overlapping region to cause the disruption of droplets, the size distribution of spray droplets was also important as well as Weber number.

• 한국해양환경ㆍ에너지학회지
• /
• 제1권1호
• /
• pp.47-55
• /
• 1998

본 논문에서 저자들은 혼잡도의 관점에서 해상 교통 환경에 대한 평가를 시도하였다. 이를 위해서 우선 평가를 위한 정보를 얻기 위하여 해상 교통류에 대한 시뮬레이션을 수행하였다. 이 시뮬레이션은 해상 교통 환경에 대한 광범위한 자료 조사를 바탕으로 하며 통계적인 방법들을 이용하여 이 조사 자료들을 시뮬레이션에 반영하였다. 다음으로 충돌 회피 시스템 개발을 위하여 제안된 충돌 위험도 추론 방법들을 이용하여 혼잡도 정의와 추론을 시도하였다. 이와 같이 정량화된 혼잡도는 해상 교통 환경의 설계 및 개선에 유용한 많은 정보를 제공할 수 있을 것으로 기대된다.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.991-998
• /
• 1989

본 연구에서는 충돌각을 변수로 한 실험적 연구를 수행하기 위하여 여타의 변수를 고정하였으며, 유속은 R$_{e}$=5.2*$10^{4}$의 결과를 제시하였다.

• 해양환경안전학회지
• /
• 제20권2호
• /
• pp.186-192
• /
• 2014

본 연구에서는 대정해상풍력단지 설치 해역과 인근수역을 이용하는 선박교통량과 해상교통흐름의 패턴을 분석하고 단지 조성 후 합리적인 대체통항로 지정에 따른 교통량을 예측하였다. 또한 예측된 교통량을 근거하여 통항로별 통항안전성을 평가하고 검토함으로써 선박의 안전운항에 필요한 제반조건 및 대책을 제시하였다. 풍력단지 설치 해역과 인근수역의 해상교통흐름 패턴을 분석한 결과 총 8가지의 교통흐름으로 분류되었고, 연간 교통량은 8,975 척으로 예측되었다. 이를 근거로 단지 조성 후 4가지의 대체 통항로 지정에 따른 교통량을 예측하였다. 예측된 교통량과 SSPA의 동력선충돌모델을 이용하여 통항안전성을 평가한 결과 충돌 및 침로이탈확률에 관한 국내 안전기준 $10^{-4}$ 이하를 만족하므로 계획된 대체통항로가 유용함을 확인하였다.

• 한국전산유체공학회지
• /
• 제15권2호
• /
• pp.21-27
• /
• 2010

Immersed boundary lattice Boltzmann method (IBLBM) has been applied to simulate a turbulent flow over circular cylinder in a flow field effectively. Although IBLBM is very effective method to simulate the flow over a complex shape of obstacle in the flow field regardless of the constructed grids in the calculation domain, the results, however, become numerically unstable in high reynolds number flow. The most effective suggestion to archive the numerical stability in high Reynolds number flow is applying the multiple relaxation time (MRT) model instead of single relaxation time(SRT) model in the collision term of lattice Boltzmann equation. In the research MRT model for IBLBM was introduced and comparing the numerical results obtained by applying SRT and MRT. The hydraulic characteristic of cylinder in a flow field between two parallel plate at the range of $Re{\leqq}2000$represented and it is also compared the drag and lifting coefficients of the cylinder calculated by IBLBM with SRT and MRT model.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.169.2-169.2
• /
• 2010

Recently, the massive offshore bridges in a ship passage have been constructed on the sea. Therefore, the ship impact protection for the bridge-piers are installed to consider the possibility of vessel collision danger. Due to the ship impact protection, the flow-field characteristics are changed in comparison with the condition without the ship impact protection. Especially, the fluid velocity between the pier and the ship impact protection is possible to increase due to the contraction of the cross sectional area of flow. In this study, the tidal energy magnitude around the ship impact protection of Incheon bridge is assessed by simulating the flow-field by using FLOW-3D software.