• 교육시설 논문지
• /
• 제19권1호
• /
• pp.37-44
• /
• 2012

This study developed an algorithm to predict the most efficient evacuation protocol in an elementary school that has an irregular type of architectural planning. The assumption of this study takes a stand point that today's elementary schools are designed in unusual and irregular floor type and, therefore, past architect's knowledge regarding efficient evacuation will no longer effective to save lives. In this regard, this study applied an algorithm that is especially designed to find appropriate locations in general in the field of industrial engineering, which has been proven for many decades. Furthermore, this study not only adapted an engineering model but also conversed to examine spatial relationship and added the concept of group evacuation, which will delay the whole evacuation process, in the tested algorithm to make it more architectural. Consequently, this study compared its outcome with an existing elementary school and questioned its effectiveness in evacuation process based on the algorithm.

• 한국GIS학회:학술대회논문집
• /
• 한국GIS학회 2010년도 추계학술대회
• /
• pp.42-49
• /
• 2010

현재 대규모 실내공간이 증가하고 있고, 이에 따른 화재 등의 사고가 발생함에 따라 화재대피시스템과 같은 실시간 실내 응용에 대한 관심이 증대되고 있다. 그러나 학문적 연구 또는 상업용 시스템에서 사용되는 화재모델이내 보행자 모델은 대부분 2D 기반의 CAD와 같은 파일구조를 기반으로 하고 있으며 가상데이터를 이용한 시뮬레이션에 초점을 두고 있다. 따라서 이들을 실내 센서 등을 이용한 실시간 시스템으로 구축하기 위해서는 몇 가지 문제점들이 해결되어야 한다. 우선, 실내공간의 의미 있는 관계정보를 포함하는 위상적인 3D 모델이 필요하다. 또한, 실내 센서들에 의해 감지된 보행자의 이동을 저장하고, 저장된 데이터를 이용하여 실시간 안내를 위해서는 실내데이터 구축에 공간 DBMS를 이용해야 한다. 본 연구에서는 실내보행자 모델에서 두 가지 개선점을 제시하고자 한다. 첫째는, 간단한 3D 실내 모델구축과 공간 DBMS와 연계된 보행자 시뮬레이터를 구현하는 과정을 제시한다. 둘째는, 보행자의 가시성(visibility)에 대한 영향이 반영된, 개선된 floor field 모델을 제안한다. 이와 같은 과정을 캠퍼스 건물에 적용하고 시뮬레이션을 수행하는 과정을 예시하였다.

• 한국소음진동공학회논문집
• /
• 제20권12호
• /
• pp.1216-1222
• /
• 2010

Based on the MacDonald's analytic model for the diffracted sound field of a semi-infinite noise barrier, computer simulations were performed for various positions of error microphones for an active noise barrier system. The simulation process also included the effects of floor reflections on both sides of the barrier. The results were also compared with Niu's simulation results and showed a straight line arrangement of sensors and actuators, in the order of primary source, secondary source and error microphone is better than over the top arrangement of the error microphones.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.456-463
• /
• 1997

Atrium buildings are commonly found in Hong Kong since 1980. Those spaces are usually crowded with people and so fire protection systems have to be installed for providing a safe environment. Smoke control system was identified to be important but no clear design guidelines are available because the smoke filling process was not well-understood. In this paper., Computational Fluid Dynamics(CFD) or fire field model is applied to study the smoke filling pattern in atrium. Two common cases on smoke spreading out from a shop adjacent to the atrium; and with a fire located at the atrium floor itself were considered. Simulations with a modified form of the CFD package TEAM were performed. Application of the predicted results Is illustrated.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.171-178
• /
• 2013

Workers are avoiding production/manufacturing sites due to the poor working environment and concern over safety. Small and medium-sized businesses introduce new equipment to secure safety in the production site or ensure effective process management by introducing the real-time monitoring technique for existing equipment. The importance of real-time monitoring of equipment and process in the production site can also be found in the ANSI/ISA-195 model. Note, however, that most production sites still use paper-based work slip as a process management technique. Data reliability may deteriorate because information on the present condition of the production site cannot be collected/analyzed properly due to manual data writing by the worker. This paper introduces the monitoring and process management technique based on a direct facility interface to secure safety in the field by improving the poor working environment and enhance there liability and real-time characteristics of the production data. Since the data is collected from equipment in real-time directly through the SIB-based interface and PLC-based interface, problems associated with workers' manual data input are expected to be solved; safety can also be improved by enhancing workers' attention to work by minimizing workers' injuries and disruption.

• 한국강구조학회 논문집
• /
• 제17권4호통권77호
• /
• pp.481-490
• /
• 2005

본 논문은 중력하중의 지배를 받는 CFT기둥-RC 무량판 접합부의 실물대 실험결과를 요약한 것이다. CFT구조는 여러 가지 구조 및 시공상의 장점으로 인하여 국내 건설 현장에서 상대적으로 짧은 시간에 폭넓게 수용되고 있다. 주차장 용도로 주로 사용되는 지하층은 철근콘크리트 무량판으로 시공하여 경제성을 도모하는 것이 국내에서 일반적으로 요구되는 시공관행이다. 그러나 CFT기둥-RC 무량판 접합부의 효율적인 디테일은 아직 국내 외적으로 제시된 바가 없어서 이 분야의 연구가 매우 필요한 실정이다. 현장 시공시 경제성을 극대화할 수 있는 몇 가지 전략을 기초로 해서, 여러 가지 접합 상세를 제안하였고 실험을 통하여 검증하였다. 실험결과 본 연구에서 제시된 CFT기둥-RC 무량판 접합 상세의 펀칭강도 및 강성이 RC 무량판 접합부와 동등하거나 이를 상회하는 것을 확인할 수 있었다.

• 한국전산구조공학회논문집
• /
• 제22권3호
• /
• pp.289-296
• /
• 2009

건축구조물의 고유진동수는 지진하중 혹은 풍하중의 크기를 결정하고 바람에 의한 진동을 예측하여 사용성조건을 검토하기 위해 반드시 필요하다. 본 논문에서는 철근콘크리트조 주상복합건물을 대상으로 현장계측을 통해 얻은 데이터와 시스템 식별기법을 사용하여 얻은 고유진동수와 모드형상을 해석모델에 의한 결과와 비교하였다. 해석모델은 실무에 일반적으로 사용되어지는 PC기반의 유한요소해석 프로그램을 사용하여 작성하였으며, 골조만을 모델링한 기본모델로부터 계측당시 구조물의 강성에 영향을 미칠 것으로 판단되는 요소들을 단계적으로 포함시켜 가면서 그 결과를 계측치에서 얻은 값과 비교하였다. 기본모델로부터 수정된 사항은 1) 콘크리트 배합강도를 고려한 탄성계수의 보정, 2) 바닥 슬래브의 휨강성, 3) 비구조벽이다. 이와 같은 요소를 모두 포함한 해석모델은 실제 계측치로부터 얻은 고유진동수, 모드형상과 가장 유사한 결과를 나타내었다.

• 한국화재소방학회논문지
• /
• 제27권4호
• /
• pp.1-6
• /
• 2013

압력차를 이용해서 연기를 제어하는 급기가압 제연시스템의 경우에는 건축물 내의 압력 형성에 영향을 미치는 인자들을 설계에 반영해야 하며, 연돌효과가 중요한 인자 중 하나이다. 본 연구에서는 네트워크 모델 기반의 수치해석적 방법을 이용해서 20층 규모의 건축물 피난계단을 대상으로 연돌효과가 포함된 급기가압 제연시스템의 운전 특성을 분석하였다. 연돌효과만 작용하는 경우와 급기가압 제연시스템만 작용하는 경우 및 연돌효과와 급기가압 제연시스템이 동시에 작용하는 경우의 3가지 조건에 대해서 해석을 수행하였다. 층별로 구획실의 압력과 공기 유량에 대한 상세한 해석결과를 제시하였으며, 연돌효과의 영향을 가시적으로 표현하였다. 한편 연돌효과와 급기가압 효과가 합해진 만큼 계단실의 압력이 상승하는 해석결과와 이에 따른 문제점을 제기하였다.

• 환경영향평가
• /
• 제15권2호
• /
• pp.93-100
• /
• 2006

In general, the verification to prediction formula in a national road and the main street of a town has been used recklessly in Korea. Therefore we investigated the validity of an existing prediction formula (NIER(87, 99), TR-Noise, KLC(2002)) with correction relationship which was based on both the prediction formular from apartment complex in the field and height 1.5m from the surface level. On the results of measuring the noise level form an isolated distance, the noise level showed that it was 4.5~5.5dB(A) by reason of becoming 2 folder far from a source. From the distribution of noise level measured by the apartment floors, the measurement point (1st floor) was 58.7~71.4dB(A) at its lowest level and the middle floors (3, 5, 7 and 10) were the highest distribution of noise level. From the analysis results on the application validity to an existing prediction formular (NIER(87, 99), TR-Noise, KLC(2002)) in the height 1.5m, the correction coefficients were 0.95~0.96 and the measured values were reasonably close to the predicted values, indicating the validity and adequacy of the predicted models. KLC(2002) model was found accurate within 3dB(A) with 36 data out of the total 42 data, showing the most accuracy among the predict models. However, the developed models have to improve the accuracy with a various of factors.

• 한국정보시스템학회지:정보시스템연구
• /
• 제12권2호
• /
• pp.57-72
• /
• 2003

The purpose of this paper is to propose the modeling of multiagent based SCM and implement the prototype in the Internet environment. SCM process follows the supply chain operations reference (SCOR) model which has been suggested by Supply Chain Counsil. SCOR model has been positioned to become the industry standard for describing and improving operational process in SCM. Five basic processes, plan, source, matte, deliver and return are defined in the SCOR model, through which a company establishes its supply chain competitive objectives. A supply chain is a world wide network of suppliers, factories, warehouses, distribution centers and retailers through which raw materials are acquired, transformed or manufactured and delivered to customers by autonomous or semiautonomous process. With the pressure from the higher standard of customer compliance, a frequent model change, product complexity and globalization, the combination of supply chain process with an advanced infrastructure in terms of multiagent systems have been highly required. Since SCM is fundamentally concerned with coherence among multiple decision makers, a multiagent framework based on explicit communication between constituent agents such as suppliers, manufacturers, and distributors is a natural choice. Multiagent framework is defined to perform different activities within a supply chain. Dynamic and changing functions of supply chain can be dealt with multi-agent by cooperating with other agents. In the areas of inventory management, remote diagnostics, communications with field workers, order fulfillment including tracking and monitoring, stock visibility, real-time shop floor data collection, asset tracking and warehousing, customer-centric supply chain can be applied and implemented utilizing multiagent. In this paper, for the order processing event between the buyer and seller relationship, multiagent were defined corresponding to the SCOR process. A prototype system was developed and implemented on the actual TCP/IP environment for the purchase order processing event. The implementation result assures that multiagent based SCM enhances the speed, visibility, proactiveness and responsiveness of activities in the supply chain.