• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.3
• /
• pp.421-431
• /
• 2023

Recently, the destructive power of typhoons is continuously increasing due to the influence of global warming. In a situation where the installation of floating wind turbines is increasing around the world, concerns about the huge loss and collapse of floating offshore wind turbines due to strong typhoons are deepening. Regarding to the safe operation of the floating offshore wind turbine, the development of a new type of disconnectable mooring system is required. A new fairlead chain stopper considered in this study is devised to more easily attach or detach the floating offshore wind turbine with mooring lines comparing to other disconnectable mooring apparatuses. In order to investigate the structural safety of the initial design of fairlead chain stopper that can be applied to MW-class floating type offshore wind turbine, scale-down structural models were produced using a 3-D printer and structural tests were performed on the models. For the structural tests of the scale-down models, tensile specimens of acrylonitrile butadiene styrene material that was used in the 3-D printing were prepared, and the material properties were evaluated by performing the tensile tests. The finite element analysis of fairlead chain stopper was performed by applying the material properties obtained from the tensile tests and the same load and boundary conditions as in the scale-down model structural tests. Through the finite element analysis, the structural weak parts on the fairlead chain stopper were reviewed. The structural model tests were performed considering the main load conditions of fairlead chain stopper, and the test results were compared to the finite element analysis. Through the results of this study, it was possible to experimentally verify the structural safety of the initial design of fairlead chain stopper. It is also judged that the study results can be usefully used to improve the structural strength of fairlead chain stopper in a detailed design stage.

• Journal of Korean Association for Spatial Structures
• /
• v.1 no.2 s.2
• /
• pp.101-110
• /
• 2001

A large floating structure is attracting great attention in recent years from the view of ocean space utilization. Its huge scale in the horizontal directions compared with the wavelength and relatively shallow depth make this type of floating structure flexible and its wave-induced motion be characterized by the elastic deformation. In this paper, a boundary integral equation method is proposed to predict the wave-induced dynamic response mat-like floating offshore structure. The structure is modeled as an elastic plate and its elastic deformation is expressed as a superposition of free-vibration modes in air. This makes it straightforward to expand the well-established boundary integral technique for rigid floating bodies to include the hydroelastic effects. In order to validate the theoretical analysis, we compare with the experimental result of reduced model test. Satisfactory agreement is found between theory and experiment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.973-979
• /
• 2002

Recently, floating offshore structure is studied as one of the effective utilization of the ocean space. And floating structure are now being considered for various applications such as floating airports, offshore cities and so on. The analysis of the dynamic response as it receives regular wave is studied. The finite element method is used in the analysis of structural section of this model. And the analysis is carried out using the boundary element method in the fluid division. In order to know the characteristics of the dynamic response of the floating structures, effects of wavelength, water depth, and wave direction on dynamic response of the floating structure are studied by use of numerical calculation.

• Journal of Wind Energy
• /
• v.15 no.1
• /
• pp.11-20
• /
• 2024

As the generation capacity of floating offshore wind turbines increases, the wind load applied to each turbine increases. Due to such a high wind load, the capacity of transport equipment (such as tugboats or cranes) required in the transportation and installation phases must be much larger than that of previous small-capacity wind power generation systems. However, for such an important wind load prediction method, the simple formula proposed by the classification society is generally used, and prediction through wind tunnel tests or Computational Fluid Dynamics (CFD) is rarely used, especially for a concept or initial design stages. In this study, the wind load of a 10 MW class floating offshore wind turbine was predicted by a simplified formula and compared with results of wind tunnel tests. In addition, the wind load coefficients at each stage of fabrication, transportation, and installation are presented so that it can be used during a concept or initial design stages for similar floating offshore wind turbines.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.3
• /
• pp.125-137
• /
• 1996

Experimental wind tunnel tests have been attempted to investigate the aerodynamic characteristics of floating offshore structure using some types of scaled mldels. The static behaviors of lift, drag forces and pitching moment of its models are measured to exammine the relationship between wind loads and incidence angle, wind velocity, shape of models. The effect of solid ground has been obtained also.

• Journal of Hydrospace Technology
• /
• v.2 no.1
• /
• pp.55-64
• /
• 1996

Herein a review is made on the validation problem of numerical codes applied to floating offshore structures. Since the dynamic behaviour of offshore floating structures in water waves is in general complex and nonlinear, a numerical approach seems to be promising. However, numerical codes are likely involved with uncertainties and they at the present status show apparent scatterness in typical bechmark tests, particularly in second-order wave forces. Convergence test is the minimum requirement for the validation of numerical codes. Some other practical check points are introduced to clarify the potential error sources. It is concluded that a standard procedure for validation must be urgently established sothat numerical methods can safely be used as a rational design tool.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.3
• /
• pp.171-179
• /
• 2015

Usually, in case of wind turbines on land, there are a lot of constraints for installation such as the insufficient installation space and noise pollution. On March 11, 2011, a nuclear leakage accident occurred due to the tsunami caused by the earthquake in Japan and then there have been a rapidly growing interest in floating offshore wind turbines. In this study, an optimization of the substructure of a semi-submersible type floating offshore wind turbine was made. Design variables were set and design alternatives were fixed. UOU-FAST was used for motion analysis in combined environmental conditions of waves and wind. Response Amplitude Operators(RAOs) were compared between the design alternatives.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.1
• /
• pp.1-13
• /
• 2014

A new 5-MW floating offshore wind turbine moored by a spring-tensioned-leg was proposed for installation in about 50m water depth. Its substructure is a platform of the inverted conical cylinder type with massive ballast weight plate at the bottom. A 1:128 scale model was built for the preliminary engineering development. The model tests in waves and wind were carried out to estimate motion characteristics of this platform in the Ocean Engineering Wide Tank of the University of Ulsan. Its motions were measured and the RAOs were compared. The proposed floating offshore wind turbine showed a good stability and decent responses in waves, wind and operation of the wind turbine.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.4
• /
• pp.354-361
• /
• 2023

In this study, the AHP (analytic hierarchy process) technique was used to analyze the risk of expected risk factors and fishing possibilities during gillnet fishing within the floating offshore wind farms (floating OWF). For this purpose, the risks that may occur during gillnet fishing within the floating offshore wind farms were defined as collisions, entanglements, and snags. In addition, the risk factors that cause these risks were classified into three upper risk factors and ten sub risk factors, and the three alternatives to gillnet fishing available within the floating OWF were classified and a hierarchy was established. Lastly, a survey was conducted targeting fisheries and marine experts and the response results were analyzed. As a result of the analysis, among the top risk factors, the risk was the greatest when laying fishing gear. The risk of the sub factors for each upper risk was found to be the highest at the berthing (mooring), the final hauling of fishing net, and the laying of the bottom layer net. Based on the alternatives, the average of the integrated risk rankings showed that allowing full navigation/fisheries had the highest risk. As a result of the final ranking analysis of the integrated risk, the overall ranking of allowing navigation/fisheries in areas where bottom layer nets were laid was ranked the first when moving vessels within the floating OWF was analyzed as the lowest integrated risk ranking of the 30th at the ban on navigation/fisheries. Through this, navigation was analyzed to be possible while it was analyzed that the possibility of gillnet fishing within the floating OWF was not high.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.4
• /
• pp.300-310
• /
• 2014

This paper presents a mooring design procedure of a floating offshore wind turbine. The environment data of south offshore area of Jeju collected from Korea Hydrographic and Oceanographic Administration(KHOA) are used for hydrodynamic analyses as environmental conditions. We considered a semi-submersible type floating wind turbine based on Offshore Code Comparison Collaborative Continuation(OC4) DeepCWind platform and National Renewable Energy Laboratory(NREL) 5 MW class wind turbine. Catenary mooring with studless chain is chosen as the mooring system. Important design decisions such as how large the nomial sizes are, how long the mooring lines are, how far the anchor points are located, are demonstrated in detail. Considering ultimate limit state and fatigue limit state based on 100-year return period and 50-year design life, respectively, longterm predictions of breaking strength and fatigue are proposed.