• 전자공학회논문지T
• /
• 제35T권2호
• /
• pp.6-12
• /
• 1998

박막의 SOI(Silicon-On-Insulator) 소자는 짧은 채널 효과(short channel effect), subthreshold slope의 개선, 이동도 향상, latch-up 제거 등 많은 이점을 제공한다. 반면에 이 소자는 current kink effect와 같이 정상적인 소자 동작에 있어 주요한 저해 요소인 floating body effect를 나타낸다. 본 논문에서는 이러한 문제를 해결하기 위해 T-형 게이트 구조를 갖는 SOI NMOSFET를 제안하였다. T-형 게이트 구조는 일부분의 게이트 산화막 두께를 다른 부분보다 30nm 만큼 크게 하여 TSUPREM-4로 시뮬레이션 하였으며, 이것을 2D MEDICI mesh를 구성하여 I-V 특성 시뮬레이션을 시행하였다. 부분적으로 게이트 산화층의 두께가 다르기 때문에 게이트 전계도 부분적으로 차이가 발생되어 충격 이온화 전류의 크기도 줄어든다. 충격 이온화 전류가 감소한다는 것은 current kink effect가 감소하는 것을 의미하며, 이것을 MEDICI 시뮬레이션을 통해 얻어진 충격 이온화 전류 곡선, I-V 특성 곡선과 정공 전류의 분포 형태를 이용하여 제안된 구조에서 current kink effect가 감소됨을 보였다.

• 대한토목학회논문집
• /
• 제33권5호
• /
• pp.1887-1895
• /
• 2013

이 연구에서는 2차원 조파수조에서 수리모형실험을 실시하여 수중터널 모형의 수리학적, 구조적 성능을 고찰하였다. 수심 및 부력 대 자중비를 다양하게 변화시킨 조건에서 파고 및 주기가 서로 다른 규칙파를 조파하여 실험을 수행하였다. 실험 자료의 분석을 통해서 연직방향 및 횡방향 동요가 파고 및 주기에 따라 선형적으로 증가함을 확인하였다. 반면에, 회전 운동의 크기는 파고 및 주기가 설계파 정도로 커지지 않으면 별로 크게 나타나지 않았다. 마찬가지로, 계류장력 및 수중터널에 작용하는 파력도 파고 및 주기에 따라 선형적으로 증가하였다. 수심 및 부력 대 자중비의 변화와 관련해서는, 구조적 거동 및 수중터널에 작용하는 파력의 크기 모두 수심 증가 및 부력 대 자중비 감소에 따라서 전체적으로 감소하는 경향이 나타났다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권5호
• /
• pp.632-639
• /
• 2011

해양 파력 발전 시스템의 설계를 위하여 본 연구에서는 6-자유도운동해석 기법을 적용한 3차원 CFD 해석으로 두 개의 부유체에 대한 거동을 유입되는 파의 성질에 따라 해석하였다. 수조모델내에서의 파의 생성형상을 현재 실험에서 가장 많이 사용되는 피스톤 형식의 조파기와 동일한 형태의 파를 생성하였으나 얕은 수심으로 인하여 바닥면에서 생성되는 에크만 경계층에 의해 파의 에너지가 감쇄되는 현상을 보였다. 생성된 파를 이용하여 파장에 따른 부유체의 거동을 계산한 결과 파장이 5m인 경우 부유체의 최대 진폭은 0.3m, 파장 1m인 경우 최소 진폭은 0.15m 그리고 파장 6m인 경우 부유체간 최대 거리는 1.06m로 계산되었다.

• 한국양식학회지
• /
• 제11권1호
• /
• pp.39-48
• /
• 1998

Growth performance and excretions of nitrogen (N) and phosphorus (P) were investigated with carp (Cyprinus carpio) with carp (Cyprinus carpio) grower fed a low pollution diets (A and B) and commercial ones (Com-1 and Com-2). A recirculated rearing system (Exp. I) and a floating net cage system (Exp. II) were employed for two feeding trials in which fish having an initial body weight of 152g and 193g were fed for 41 an 39 days, respectively. The highest weight gain, daily growth rate and protein efficiency ratio were found (P<0.05) in fish fed diet A containing 10% fish meal and 2% monocalcium phosphate (MCP) for both experiments. They also showed the lowest feed conversion ratio and daily feeding ration among treatments. Fish fed diet B containing 10% fish meal, 5% fish protein concentrate and 1% MCP showed weight gain and FCR more improved (P<0.05) than those fed commercial diets. In all groups, whole body cmpositions were not greatly different among treatment, and protein and P contents in final fish ranged from 14.3 to 15.6% and from 0.39 to 0.48%, respectively. Fish fed diet A excreted the least N which were 38.3 in Exp. I and 39.6g/kg gain in Exp. II. However, the values found in fish fed two commercial diets amounted to 59.1 and 58.9g, respectively. A significant decrease in P excretion was also found in fish groups fed diets A and B. In Exp. I, a reduction of 53.4% was shown in fish fed diet A, compared to the averaged value (18.5g P/kg gain) of two commercial groups. In Exp. II conducted using the floating net cages, fish fed diet B excreted the least P (8.6g/kg gain) among the treatment, which was followed by fish fed diet A, showing 48.6% reduction compared to the average value (18.5g/kg gain) for fish fed two commercial diets. The present results clearly showed that N and P excretions from fish culture could be significantly reduced by using the low pollution diet.

• 대한조선학회논문집
• /
• 제52권6호
• /
• pp.460-470
• /
• 2015

In general ships and FPSOs, roll damping is very small and consequently roll motion is very large at the roll resonance frequency. Proper evaluation of the roll damping coefficient at the resonance frequency is an important task in the study of roll motion and usually it is done by the analysis of free roll decay tests. The relative decrement method based on energy relation has been used mainly for the evaluation of roll damping coefficient from the roll decay test so far. As another method, the logarithmic decrement method based on equivalent linear decay assumption can be used for the same purpose and it is relatively simple. In this paper, both of the relative decrement method and the logarithmic decrement method are used for the evaluation of roll damping coefficient including quadratic damping from the free roll decay tests, and their results are cross-checked for verifying the obtained damping coefficients. Through applications to a box-type floating body equiped with bilge keels, it is shown that the two methods give almost the same damping coefficients in a practical view point and the cross-check of their results is to be a good tool to prevent a possible error. And also the quantitative effects of the bilge keels on the roll damping of box-type floating body are shown and discussed.

• Applied Microscopy
• /
• 제30권2호
• /
• pp.233-240
• /
• 2000

미분화된 엽상체 및 연결사와 뿌리로만 구성되어 있는 개구리밥(Spiroela polyrhiza)식물체의 구조분화 양상이 연구되었다. 엽상체는 엽육세포 내에 발달하여 있는 다수의 엽록체와 않은 막으로 구획화된 기실이 잘 발달되어 있어 광합성 및 부유에 중요한 역할을 하고, 측부로 발달하는 연결사에는 기실이 형성되어 있지 많으며 탈리층을 형성하여 모엽상체와 자엽상체를 분리시킨다. 뿌리는 흡수 및 식물체의 중심을 잡는데 중요한 역할을 하며, 근단부위에는 액포화된 근관세포층이 뚜렷히 발달하여 있다. 뿌리의 피층에는 원주형 기실이 형성되어 있으며 피층세포 내에는 잘 발달된 골지체, 미토콘드리아, rER등의 세포소기관들이 치밀하게 분포하였다. 엽상체, 연결사, 뿌리세포에는 엽록체가 발달하며 다수의 원형질 연락사가 분포하였다. 개구리밥은 10mm내외의 매우 축소된 식물체를 구성하나 효율적으로 잘 발달된 구조 분화체계를 이룬다. 이러한 구조는 수표면에 부유하여 빠르게 생장 및 증식하는 작은 식물체 크기와 이들의 괌은 생활환과 밀접한 관계가 있는 것으로 추정된다.

• 한국태양에너지학회 논문집
• /
• 제34권2호
• /
• pp.98-106
• /
• 2014

The effect of wake on the performance and load of a downstream wind turbine on a floating platform is investigated with a computer simulation in this study. The floating platform consists of a square platform having a dimension of $200m{\times}200m$ with four 2 MW wind turbines installed. For the simulation, only two wind turbines in series with the wind direction were considered and the floating platform was assumed to be stationary due to its large size. Also, a commercial program based on multi-body dynamics and eddy viscosity wake model was used. It was found from simulation that the power from the downstream wind turbine could be reduced by more than 50% of the power from the upstream wind turbine. However, due to the increase in the turbulence intensity, the power is greater but more fluctuating than the power produced by a wind turbine experiencing the same wind speed without wake. Also, it was found that the load of the down stream wind turbine be comes lower than the load of the upstream wind turbine but higher than the load of a wind turbine experiencing the same wind speed without wake.

• 한국의류학회지
• /
• 제35권8호
• /
• pp.968-981
• /
• 2011

This study examines the effect of the structure of Intarsia and Jacquard knit on mechanical properties of knit fabrics to suggest data for knit design. Intarsia and 7 types of Color Jacquard (Floating Jacquard, Normal Jacquard, Bird's eye Jacquard, Tubular Jacquard, Ladder's back Jacquard, Blister Jacquard, and Transfer Jacquard) were used. The samples with a gauge of 14 were knitted using 100% wool 2/48's yarn by Shima Seiki SIG computer knitting machine. The Objective Hand was measured by KES-FB system and HV and THV were calculated by the formula of KN-402-KT and KN-301-winter respectively. The results showed that Intarsia and Floating Jacquard are thin, flexible and light, Bird's eye Jacquard is slick, flat and slim, Tubular Jacquard is stiff and undrapable, Ladder's back Jacquard is difficult in shearing deformation and relatively bulky, Blister Jacquard is thickest and transfer jacquard is uneven in surface contour. The selection of proper structure is important for the knit apparel production since the thickness and weight of knit determine the amount of yarn needed and consequently the production cost. The hands of Ladder's back Jacquard and Tubular Jacquard are superior to those of other structures. Intarsia and Floating Jacquard which are thin, light and flexible seem to be good structures for designs showing a body silhouette whereas, Bird's eye Jacquard, Tubular Jacquard and Blister Jacquard (which are thick, heavy, and stiff) are suitable for a boxy silhouette.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권3호
• /
• pp.333-347
• /
• 2013

The present study numerically models the interaction between a regular wave and the roll motion of a rectangular floating structure. In order to simulate two-dimensional incompressible viscous two-phase flow in a numerical wave tank with the rectangular floating structure, the present study used the volume of fluid method based on the finite volume method. The sliding mesh technique is adopted to handle the motion of the rectangular floating structure induced by fluid-structure interaction. The effect of the wave period on the flow, roll motion and forces acting on the structure is examined by considering three different wave periods. The time variations of the wave height and the roll motion of the rectangular structure are in good agreement with experimental results for all wave periods. The present response amplitude operator is in good agreement with experimental results with the linear potential theory. The present numerical results effectively represent the entire process of vortex generation and evolution described by the experimental results. The longer wave period showed a different mechanism of the vortex evolution near each bottom corner of the structure compared to cases of shorter wave periods. In addition, the x-directional and z-directional forces acting on the structure are analyzed.

• Tribology and Lubricants
• /
• 제31권6호
• /
• pp.302-307
• /
• 2015

The use of turbocharger in internal combustion engines has increased as it is a key components for improving system efficiency without increasing engine size. Because of increasing demand, many studies have evaluated rotordynamic performance so as to increase rotation speed. This paper presents a linear and nonlinear analysis model for a turbocharger rotor supported by a floating ring bearing. We constructed rotor model by using the finite element method and approximated bearings as being infinitely short. In the linear model, we considered fluid film force as stiffness and damping element. In nonlinear analysis, calculation of the fluid film force involved solving the time dependent Reynolds equation. We verified the developed model by comparing the results to those of previous research. The analysis results show that there are four unstable modes, which are rigid body modes combining ring and rotor motion. As the rotating speed increases, the logarithmic decrement shows that certain unstable modes goes into the stable area or the stable mode goes into the unstable area. These unstable modes appear as sub-synchronous vibrations in nonlinear analysis. In nonlinear analysis frequency jump phenomenon demonstrated in several experimental studies appears. The analysis results also showed that frequency jump phenomenon occurs when the vibration mode changes and the sequence of unstable mode matches the linear analysis result. However, the natural frequency predicted using linear analysis differs from those obtained using nonlinear analysis.