• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.113-119
• /
• 2012

Ultrasonic bonding is the novel packaging method for flip-chip with high yield and low-temperature bonding. The bonding module is a core part of the bonding machine, which can transfer the ultrasonic energy into the bonding spot. In this paper, we propose topology optimization technique which can make new design of boding modules due to the constraints on resonance frequency and mode shapes. The designed bonding module using topology optimization was fabricated in order to evaluate the bonding performance and reliable operation during the continuous bonding process. The actual production models based on the proposed design satisfied the target frequency range and ultrasonic power. The bonding test was performed using flip-chip with lead-free Sn-based bumps, the results confirmed that the bonding strength was sufficient with the designed bonding modules. Also the performance degradation of the bonding module was not observed after the 300-hour continuous process with bonding conditions.

• 마이크로전자및패키징학회지
• /
• 제7권1호
• /
• pp.61-73
• /
• 2000

In traditional electronic packages the die and the substrate are interconnected with fine wire. Wire bonding technology is limited to bond pads around the peripheral of the die. As the demand for I/O increases, there will be limitations with wire bonding technology.

• 한국통신학회논문지
• /
• 제35권1B호
• /
• pp.62-67
• /
• 2010

본 연구는 다양한 산업 환경에 적용되는 RFID 태그 개발에 있어 RFID 태그 패키징 개발과 RFID 태그 플립칩(flip chip) 접합 방법이 산업 환경 맞춤형 RFID 태그 개발에 미치는 영향에 대해 분석하였다. RFID 태그 플립칩(flip chip) 접합은 와이어 접합(wire bonding), 초음파 접합(ultrasonic bonding), 열융착 접합(heat plate bonding), 레이저 접합(laser bonding)으로 구분되어 있으며, 이런 접합 방법은 다양한 RFID 태그 개발의 적용 환경에 따라 적합한 접합 방법이 있음을 본 연구를 통해서 알 수 있었다. 극고온, 극저온, 다습, 고내구성 등 다양한 산업 환경 중 극고온 환경에서의 RFID 태그 개발은 빛 에너지를 흡수하여 열 에너지로 전환하는 레이저 접합 방법과 직접적인 열 전달 방식인 열융착 접합 방법은 접속 재료인 ACF의 손상으로 인해 부적합하고, 와이어를 이용하여 직접 범프와 패턴을 연결하는 와이어 접합 방법이 적합함을 알 수 있었다.

• 마이크로전자및패키징학회지
• /
• 제14권1호
• /
• pp.19-26
• /
• 2007

본 연구의 목적은 CMOS 이미지 센서용 Au 플립칩 범프와 전해 도금된 Au 기판 사이의 초음파 접합의 가능성 연구이다. 초음파 접합 조건을 최적화하기 위해서, 대기압 플라즈마 세정 후 접합 압력과 시간을 달리하여 초음파 접합 후 전단 시험을 실시하였다. 범프의 접합 강도는 접합 압력과 시간 변수에 크게 좌우되었다. Au 플립칩 범프는 상온에서 성공적으로 하부 Au 도금 기판과 접합되었으며, 최적 조건 하에서 접합 강도는 약 73 MPa이었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.327-328
• /
• 2007

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.41-42
• /
• 2008

• 한국공작기계학회논문집
• /
• 제18권1호
• /
• pp.116-121
• /
• 2009

Thermosonic flip chip bonding is an important technology for the electronic packaging due to its simplicity, cost effectiveness and clean and dry process. Mechanical properties of the horn and the shank, such as the natural frequency and the amplitude, have a great effect on the bonding capability of the transverse flip chip bonding system. In this research, two kinds of study are performed. The first is the new design of the clamp and the second is the effect of tolerance parameters to the performance of the system. The clamp with a bent shape is newly designed to hold the nodal point of the flip chip. The second is the effect of the design parameters on the vibration amplitude and planarity at the end of the shank. The variation of the tolerance parameters changes the amplitude and the frequency of the vibration of the shank. They, in turn, have an effect on the quantity of the plastic deformation of the gold ball bump, which determined the quality of the flip chip bonding. The tolerance parameters that give the great effect on the amplitude of the shank are determined using Taguchi's method. Error of set-up angle, the length and diameter of horn and error of the length of the shank are determined to be the parameters that have peat effect on the amplitude of the system.

• 마이크로전자및패키징학회지
• /
• 제15권4호
• /
• pp.9-15
• /
• 2008

Au와 Sn을 순차적으로 도금한 Au/Sn 범프를 플립칩 본딩하여 Au-Sn 솔더 접속부를 형성 후, 미세구조와 접속저항을 분석하였다. $285^{\circ}C$에서 30초간 플립칩 본딩한 Au-Sn 솔더 접속부는 $Au_5Sn$+AuSn lamellar 구조로 이루어져 있으며, 이 시편을 $310^{\circ}C$에서 3분간 유지하여 2차 리플로우시 $Au_5Sn$+AuSn interlamellar spacing이 증가하였다. $285^{\circ}C$에서 30초간 플립칩 본딩한 Au-Sn 접속부는 15.6 $m{\Omega}$/bump의 평균 접속저항을 나타내었으며, 이 시편을 다시 $310^{\circ}C$에서 3분간 유지하여 2차 리플로우 한 Au-Sn 접속부는 15.0 $m{\Omega}$/bump의 평균 접속저항을 나타내었다.

• 반도체디스플레이기술학회지
• /
• 제4권2호
• /
• pp.33-37
• /
• 2005

Bare-chip packaging becomes more popular along with the miniaturization of IT components. In this paper, we have studied flip-chip process, and developed automated bonding system. Among the several bonding method, NCP bonding is chosen and batch-type equipment is manufactured. The dual optics and vision system aligns the chip with the substrate. The bonding head equipped with temperature and force controllers bonds the chip. The system can be easily modified fer other bonding methods such as ACF.

• 한국재료학회지
• /
• 제20권12호
• /
• pp.681-685
• /
• 2010

The application of flip chip technology has been growing with the trend of miniaturization of electronic packages, especially in mobile electronics. Currently, several types of adhesive are used for flip chip bonding and these adhesives require some special properties; they must be solvent-free and fast curing and must ensure joint reliability against thermal fatigue and humidity. In this study, imidazole and its derivatives were added as curing catalysts to epoxy resin and their effects on the adhesive properties were investigated. Non-isothermal DSC analyses showed that the curing temperatures and the heat of reaction were dependent primarily on the type of catalyst. Isothermal dielectric analyses showed that the curing time was dependent on the amount of catalysts added as well as their type. The die shear strength increased with the increase of catalyst content while the Tg decreased. From this study, imidazole catalysts with low molecular weight are expected to be beneficial for snap curing and high adhesion strength for flip chip bonding applications.