• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.10
• /
• pp.781-787
• /
• 2016

We introduce FEST (Flight Environment Simulation Test) procedures for precise guided missiles to reliably improve systems. Flight vibration specification was established based on power spectral density curves calculated from flight test data of a high speed precise guided missile. A FEST pre-profile was developed according to flight vibration specification and delivered to a precise guided missile assembly. Vibration responses were measured by installing accelerometers on electronic components vulnerable to dynamic forces. The FEST profile was adjusted by comparing the vibration responses and the flight vibration specification. Subsequently, the FEST profile was repeatedly modified through trial and error, because the responses were similar to the flight environment. The modified FEST profile enabled performance testing of assembled precise guided missiles under simulated flight conditions on the ground, where unexpected errors could be corrected before the flight tests, leading to cost and risk reduction in the development of the precise guided missile system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.6
• /
• pp.548-554
• /
• 2012

Verification and validation of operational software of the flight control computer, which is flight safety critical, is very important to prove correctness and faultness of the software. To verify the real-time softare requirement on operational software of flight control computer, real-time software internal parameter and variable monitoring technics on hardware-in-the-loop environment, similar to on-flight environment, is required. This paper describes flight safety critical software validation and verificiation environment using standard debugging interface, NEXUS 5001.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.3
• /
• pp.273-280
• /
• 2023

Recently electronic safety and arming device(ESAD) has attracted increasing attention due to its design flexibility. However, ESAD can be armed unintentionally due to a malfunction of an external device or interface. Thus ESAD needs an internally generated arming signal independent from the external device. In this paper, a new sensor-hybrid ESAD(SHESAD) with a flight environment sensing function for generating arming signal internally is proposed and a sled test based method is also suggested for evaluating its functions. Through the test results, the operability of the flight environment sensing function was confirmed. Also, it is shown that the proposed test method is suitable for verification of ESAD with the flight environment sensing function.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.1
• /
• pp.68-78
• /
• 2023

This study aims to provide information necessary for developing a "Competency-Based Training and Evaluation Plan" for general aviation flight instructors in Korea. General aviation training experts designed a survey by selecting "Behavior Indicators" from the ICAO Flight Instructor Competency Model. This study analyses the importance of Behavioral Indicators, the level of instructor performance, and the training needs for flight instructors. According to the factor analysis, ICAO "Flight Instructor Competency Model" is found as a valid tool to measure general aviation flight instructor competencies. According to the training needs analysis, flight instructors training program needs to be improved on "Training Environment Management", "Teaching Method", and "Interaction" competencies. When compared with trainee group, flight instructors & examiners have a higher training demand for "Teaching & Learning Environment Management". This study suggests the flight instructor training program requires to be reorganized based on the competencies related to the flight instructor duties in the training environments.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.9
• /
• pp.783-791
• /
• 2007

For an access to specified helicopter simulator qualification's level C or FTD(Flight Training Device) level 5 of FAA(Federal Aviation Administration) AC(Advisory Circular) 120-63, the mathematical model of a single rotor helicopter flight dynamics is investigated. From the rotorcraft simulation model validated by evaluation of its flight performance, the feasibility of the flight dynamic model that is selected for its effectiveness has been proved. Thereby the simulation environment for evaluation of helicopter flying quality is established with the development of FTD for training and testing the flight performance.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.4
• /
• pp.53-61
• /
• 2013

In-flight service, depending on the perceptions of service satisfaction because ever turns into a variable, which enables service providers the flexibility of a variable in the end flight service to suit your needs to providing comprehensive and proactive services of the crew will be motivated. In addition, the service provider's motivation to work in a confined space on board the flight service characteristics in-flight service will be a major impact on the environment. This service-oriented environment, in-flight service and motivation in order to verify the impact on services in Cape factors as independent variables and the dependent variable service-oriented multi-regression analysis was performed. As a result, the motivation of the crew and the crew of the service-oriented, with a voluntary service crew services dependent variable parameters that affect the behavior of the acts. Services and service-oriented motivation Cape factors significantly influence both the irradiated while the impact on voluntary service and results verification service aesthetics, cleanliness, and physical service environment, only the voluntary services of the crew a positive effect on that the effects were investigated.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.18 no.6
• /
• pp.327-333
• /
• 2023

Existing studies on the UAV (Unmanned Aerial Vehicle)-based CPS (Cyber Physical System) environment lack forest fire monitoring and forest fire reconnaissance using real-world UAVs. So, it is necessary to monitor forest fires early through CPS based on real-world UAVs with high reliability and resource management efficiency. In this paper presents an MFG (Misstion File Generater) that automatically generates a flight path of an UAV for forest fire monitoring in a CPS environment. MFG generates flight paths based on a hiking trail with a high fire probability due to a true story of an entrant. We have confirmed that the flight path generated by MFG can be applied to the UAV. Also, we have verified that the UAV flies according to the flight path generated by MFG in simulation, with a negligible error rate.

• Fashion & Textile Research Journal
• /
• v.23 no.1
• /
• pp.118-128
• /
• 2021

This study used a preliminary survey to help develop an ergonomic flight jacket that is suitable for the working environment and mission performance. The results are as follows. The ergonomic sleeve pattern was designed with a forward 165° incline that considers a shoulder joint direction suitable for the motion; in addition, a closely design opening provided warmth and safety from fire. As a result of the dimensional suitability, pilots evaluated that sleeve length and total length of the developed flight jacket were a little long (p<.01), while flight engineers and crew evaluated that those of the developed flight jacket were appropriate (p<.01). Pilots evaluated that chest circumference and waist circumference were large (p<.05), while flight engineers and crews evaluated that those of the developed flight jacket were appropriate. The evaluation of the motion suitability indicated that pilots, flight engineers and crew found the developed flight jacket more comfortable than the current flight jacket (p<.05, p<.01, p<.001). The evaluation of the usability of pockets and penholders indicated that pilots, flight engineers and crew found the developed jacket easier to use (p<.01). The flight engineers and crew evaluated that the appearance of the developed flight jacket was better than the current flight jacket (p<.05). The results of this study show that the difference of environment and mission performance has a significant influence on evaluation; therefore, it is necessary to develop separate military uniforms that included a winter flight jacket to reflect the needs of each group.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.7
• /
• pp.701-708
• /
• 2009

The flight control law of developed flight control computer(DFLCC) is developed based on operation flight program of advanced trainer aircraft full scale development final configuration. The flight control law design is used common use development tool in GUI(Graphic User Interface) environment. The flight control law transformed to C-Code is reflected in OFP. The OFP is verified by the standardized verification process. But, before standardized verification process, we need preliminary verification process such as similarity of flight control law and reliability of developed HILS. Similarity of flight control law is verified by comparing the aircraft response of advanced trainer aircraft and those of the developed control law. Also, reliability of developed HILS is verified by comparing the aircraft response of HILS and Non-real time simulation result. This paper verifies similarity of developed control law and reliability of HILS environment as comparing aircraft response.

• The Journal of Korea Robotics Society
• /
• v.16 no.3
• /
• pp.245-249
• /
• 2021

In this paper, we present novel simulation contents for drone racing and autonomous flight of drone. With Depth camera and SLAM, we conducted mapping 3 dimensional environment through RTAB-map. The 3 dimensional map is represented by point cloud data. After that we recovered this data in Unreal Engine. This recovered raw data reflects real data that includes noise and outlier. Also we built drone racing contents like gate and obstacles for evaluating drone flight in Unreal Engine. Then we implemented both HITL and SITL by using AirSim which offers flight controller and ROS api. Finally we show autonomous flight of drone with ROS and AirSim. Drone can fly in real place and sensor property so drone experiences real flight even in the simulation world. Our simulation framework increases practicality than other common simulation that ignore real environment and sensor.