• International Journal of Aeronautical and Space Sciences
• /
• 제1권2호
• /
• pp.30-42
• /
• 2000

On-orbit thermal environment test of KOMPSAT was performed in early 1999. An analysis of the test data are addressed in this paper. For the thermal-environmental simulation of spacecraft bus, an artificial heating through the radiator zones and onto some critical heat-dissipating electronic boxes was made by Absorbed-heat Flux Method. Test data obtained in terms of temperature history were reduced into flight heater duty cycles and converted into the total electrical power required for spacecraft thermal control. Verification result of flight heaters dedicated to the bus thermal control is presented. Additionally, an exhaustive heating-control process for maintaining the spacecraft thermally safe and for realistic simulation of the orbital-thermal environment during the test are graphically shown. Qualitative suggestions to post-test model correlation are given in consequency of the analysis.

• 한국항공운항학회지
• /
• 제19권1호
• /
• pp.29-37
• /
• 2011

Last April, Europe was severly damaged as all social and economic activities came to a halt prompted by the cancellation of all flights resulting from volcanic ash. This exemplifies that the meteorology conditions have significant influence on the flights of airplanes. Hence, in this research the influence that the meteorology has on the domestic flights and its characteristics will be examined, and the core meteorological factors that influence flights in each airport will be drawn. In order to do this, statistical analysis on the influence that the meteorology has on flights was carried out in order to analyze the data about flight cancelation and delay and also its cause, primarily based on the Gimpo, Gimhae, and the Jeju airports. As a result, first, the meteorological factors which impact flight cancellation and delay were different among the domestic airports, and second, it was analyzed that fog was the main meteorological factor in the Gimpo airport, strong wind in the Jeju airport, and fog in the Gimhae airport. Third, between the day the flights were cancelled and delayed occurred, and the day that weren't, the fact that there existed a difference among the actual meteorological factors was statistically drawn. With the result of such analysis, meteorological factors pertaining to the cancellation and delay of flights must be considered seperately by each airport and specialized meteorological information must be provided accordingly. Further, when selecting the position of an airport that is to be constructed in the future, implications that there is a definite need for the meteorology effect evaluation based on past meteorology data can be drawn.

• 한국항공우주학회지
• /
• 제44권4호
• /
• pp.316-323
• /
• 2016

무인항공기는 자동모드에서는 사전에 계획된 항로점(비행이거나 이/착륙)들을 입력받아 자동으로 비행한다. 무인항공기는 수동모드에서도 유인항공기와 달리 조종사가 비행체에 탑승하지 않고 지상 통제실에서 조종입력을 인가하면 무선 데이터링크를 통하여 조종입력을 전달 받아 비행하게 된다. 데이터 링크는 여러 가지 이유로 통신두절이 될 수 있으며, 이때 무인항공기는 자동으로 비행모드를 수동에서 자동으로 전환하여 비행해야 한다. 그러므로 무인항공기에서 비행조종컴퓨터는 비행안전을 담당하는 매우 중요한 장비로 철저한 검증이 요구된다. 본 논문은 무인항공기의 비행제어컴퓨터가 비행성 요구조건을 만족하고, 다양한 고장이나 비상상황에서도 강건함을 입증할 수 있도록 비행제어 알고리즘의 검증환경인 HILS(Hardware In the Loop Simulation) 시험환경을 개발할 때 고려해야 할 사항들을 연구한 것으로 비행제어 HILS 시험환경의 구성장비들과 기타 고려사항 들을 제시한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.546-549
• /
• 2004

The T-50/A-50 Golden Eagle was developed for a supersonic trainer and light combat aircraft. At the design stage, vibration control plans were established and applied. For cockpit vibration, crew comfort vibration level was defined by the requirement of MIL-A-8892. It is found that the T-50/A-50 meets the requirement of cockpit vibration from the flight test data analysis. This paper contains the results of cockpit vibration analysis using the flight test data and the results of human vibration analysis lot the pilot inside aircraft. The human vibration level of pilot is increased as dynamic pressure is increased and at the specific high dynamic pressure, the ride comfort indicates 'a little uncomfortable'. Overall analysis results show that the vibration level of T-50/A-50 cockpit is tolerable and not critical for pilot's comfort.

• 한국분무공학회지
• /
• 제26권4호
• /
• pp.171-181
• /
• 2021

This study presents a prediction methodology of thermodynamic properties by using RK-PR Equation of State in a wide range of temperature and pressure conditions including both sub-critical and super-critical regions, in order to obtain thermophysical properties for hydrocarbon aviation fuels and their products resulting from endothermic reactions. The density and the constant pressure specific heat are predicted in the temperature range from 300 to 1000 K and the pressure from 0.1 to 5.0 MPa, which includes all of the liquid and gas phases and the super-critical region of three representative hydrocarbon fuels, and then compared with those data obtained from the NIST database. Results show that the averaged relative deviations of both predicted density and constant pressure specific heat are below 5% in the specified temperature and pressure conditions, and the major sources of the errors are observed near the saturation line and the critical point of each fuel.

• 한국항공우주학회지
• /
• 제32권7호
• /
• pp.91-97
• /
• 2004

5년여에 걸쳐 개발된 국내 최초의 액체추진제 로켓 KSR-III는 2002년 11윌 28일에 성공적으로 비행시험을 완료하였다. 로켓의 발사와 관련된 위험에 대비하기 위하여, KSR-III 발사시에 한국항공우주연구원에서는 처음으로 비행안전시스템이 운영되었는데, 이 논문에서는 KSR-III 비행시험에서 운영된 비행안전시스템의 운영결과를 정리하였다. 로켓의 비행중, 로켓의 예상낙하점 및 주요 비행데이터는 비행안전통제원에 의하여 실시간으로 관찰되었는데, KSR-III를 위해 개발된 비행안전 디스플레이 시스템에서 비행 중 표시된 내역을 정리하였다. 또한, 탑재 항법시스템 및 레이다 계측 데이터를 사용한 예상낙하점의 계산 결과를 비교해 보았고, 실제 최종 낙하점과 비교한 내용을 기술하였다.

• 한국추진공학회지
• /
• 제22권5호
• /
• pp.107-114
• /
• 2018

한국형발사체 (KSLV-II) 발사대시스템 상세설계의 산화제 충전 운용 설계를 검증하고자, 나로호 1차 비행 시험 실증 자료과 설계 모델링 유동 해석 결과를 비교하였다. 최대 공급유량에 대비한 유량 비율로 충전 모드별 측정 및 계산값을 비교할 때, 모든 오차는 6.7% 이내이다. 산화제 공급 펌프 후단 및 유량조절 밸브 전단 압력 오차는 5.1% 이내이다. 발사체 공급 전단 최종 압력은 모든 충전 모드에서 실험값의 범위에 포함되는 것을 확인하였다.

• 한국기계가공학회지
• /
• 제19권11호
• /
• pp.87-93
• /
• 2020

A key component of aviation safety is to eliminate the errors in commercial aircraft air data systems to ensure stable aviation operation. Although the technical aspects such as the maintenance and inspection play a pertinent role, human errors are expected to have a similar or even larger influence on the aviation safety. Aviation maintenance and inspection tasks are often performed by a complex organization, in which individuals perform a variety of tasks in an environment involving time pressure, sparse feedback, and complex conditions. These situational characteristics, combined with the general tendency of human error, may lead to various types of errors, which may have critical consequences such as accidents and loss of life. For instance, if an amber message "IAS DISAGREE" is displayed on the primary flight display while the aircraft is rolling on the runway to takeoff, the crew immediately performs a rejected takeoff operation and troubleshoots the air data system. This paper proposes alternative approaches to address the occurrence of defects due to the human factors involved in the practical processes of the air data system of commercial aircraft.

• 대한가정학회지
• /
• 제23권4호
• /
• pp.61-68
• /
• 1985

This study was conducted in a Korean airline catering operation where about 8, 000~10, 000 in flight meals per day were served. Time ad temperature observations were made in an actual airline catering operation to determine critical control points in mushroom and cheese omelet production, and to provide guidelines for the effective quality control programs of the airline catering operation. All data collection was replicated three times. Time and temperature data were collected by using standard instruments throughout the process sequence. Most phases of the food prodct flow were identified as critical control points. Holding phases of after cooking, and before and after reheating need a special attention, since foods were held at room temperature. Several guidelines were suggested for the effective quality control programs for the airline catering operation.

• 한국항공운항학회지
• /
• 제18권1호
• /
• pp.19-26
• /
• 2010

To expand the application area of global navigation satellite systems, precision landing is one of the most critical area to be solved. For the development and validation of the precision landing system, many aspects need to be analyzed including the system architecture, signal characteristics, atmospheric delay, communication delay, accuracy, integrity, and availability. Among them, the signal characteristics analysis requires the processing of measurements collected by real-flight experiments. This paper presents the processing results of the real measurements collected by a flight and landing experiment. To process and analyze the data, double differencing position-domain hatch filter is utilized. Accuracy of the proposed filter is evaluated utilizing reference trajectory generated by commercial software. Finally, by comparing with conventional range domain characteristics of position domain filter is analyzed.