• Journal of the Korean Institute of Intelligent Systems
• /
• v.9 no.4
• /
• pp.384-388
• /
• 1999

This paper describes an approach for synthesizing a modularized gain scheduled PD type fuzzy logic controller(FLC) of nonlinear magnetic bearing system where the gains of FLC are on-line adapted according to the operating point. Specifically the systematic procedure via root locus technique is carried out for the selection of the gains of FLC. Simulation results demonstrate that the proposed gain scheduled fuzzy logic controller yields not only maximization of stability boundary but also better control performance than a single operating point (without gain scheduling)fuzzy controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.141.1-141
• /
• 2001

This paper describes an approach for synthesizing a modularized gain scheduled PD type fuzzy logic controller(FLC) for a high maneuverable aircraft system, where the gains of FLC are on-line adapted according to the flight condition. Specially, the systematic procedure via root locus technique is carried out for the sellection of the gains of FLC. Simulation results demonstrate that the proposed gain scheduled fuzzy logic controller yields better control performance than the normal (without gain scheduling) fuzzy controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.189-189
• /
• 2000

A controller test on a sounding rocket using a testbed is discussed in the paper. Because of the high cost and the risk for the flight test the hardware simulation on the ground is performed. In this paper the conventional On/Off Controller is applied to the attitude control of a sounding rocket. The hardware simulation results are compared with those of the software simulation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.8
• /
• pp.833-842
• /
• 2011

The objectives of this research are development of guidance, navigation and control system for RUAV on virtual instrumentation and real flight test. For this research, the system is divided to DAQ (data acquisition) section, actuator section and controller section. And the hardware and software on each sections are realized on LabVIEW base. Waypoint guidance and control of auto flight are realized using PID gain tuning and waypoint vector tracking guidance algorism. For safe flight test, auto/manual switching module isolated from FCS (Flight Control System) is developed. By using the switch module, swift mode change was achieved during emergency flight case. Consequently, a meter level error of flight performance is achieved.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.4
• /
• pp.614-623
• /
• 2015

When the speed of a coaxial rotor helicopter in forward flight increases, the wake skew angle of the rotor increases and consequently the position of the vena contracta of the upper rotor with respect to the lower rotor changes. Considering ambient air and the effect of the upper rotor, this study proposes a nonuniform inflow model for the lower rotor of a coaxial rotor helicopter in forward flight. The total required power of the coaxial rotor system was compared against Dingeldein's experimental data, and the results of the proposed model were well matched. A plant model was also developed from first principles for flight simulation, unknown parameter estimation and control analysis. The coaxial rotor helicopter used for this study was manufactured for surveillance and reconnaissance and does not have any stabilizer bar. Therefore, a feedback controller was included during flight test and parameter estimation to overcome unstable situations. Predicted responses of parameter estimation and validation show good agreement with experimental data. Therefore, the methodology described in this paper can be used to develop numerical plant model, study non-uniform inflow model, conduct performance analysis and parameter estimation of coaxial rotor as well as other rotorcrafts in forward flight.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.259-260
• /
• 2012

With increasing interest in alternative energy source for green growth, this document shows that the study of kite flight control is based on the concept of autonomous flight of kite can exploit the energy. Currently, prototype kite was designed and the purpose of its flight test, by manual flight control with Remote Controller, was performed for the feasibility of the full automatic flight control. For the future research, the test data should be collected through the many flight test under various environment.

• Journal of Aerospace System Engineering
• /
• v.13 no.2
• /
• pp.1-9
• /
• 2019

This paper elaborates on the directional axis guidance and control algorithm used in mission flight for high altitude long endurance UAV. First, the directional axis control algorithm is designed to modify the control variable such that a strong headwind prevents the UAV from moving forward. Similarly, the guidance algorithm is designed to operate the respective algorithms for Fly-over, Fly-by, and Hold for way-point flight. The design outcomes of each guidance and control algorithm were confirmed through nonlinear simulation of high altitude long endurance UAV. Finally, the penultimate purpose of this study was to perform an actual mission flight based on the design results. Consequently, flight tests were used to establish the flight controllability of the designed guidance and control algorithm.

• Journal of Aerospace System Engineering
• /
• v.12 no.3
• /
• pp.45-52
• /
• 2018

This paper deals with the analysis of the inner-loop algorithm of the Pixhawk which is a representative multi-copter open source. The algorithm is based on flight control-law structure. The inner-loop algorithm of the Pixhawk can be divided into a position controller and an attitude controller. The position controller generates the attitude of the multi-copter to move to the destination The position controller also generates the demand force and moment acting on each actuator. We confirm that the position controller saturates the desired acceleration and speed by using a proper relational expression. The expression can be used in order to prevent the sudden change in the attitude of a multi-copter.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.3
• /
• pp.251-257
• /
• 2012

The flight controller should meet the flying qualities, stability margins, and time response requirement according to the class of a target aircraft or UAV. Classical design process of PID controller is a very time consuming process and needed trial and erros. The best way is to apply the multi-disciplinary optimization algorithm to meet the numerous constraints of controller requirements. This paper presents how multi-objective parameter optimization (CONDUIT) can be used to determine many design parameters of lateral stability and augmentation system for roll and heading controller of the small UAV. To verify the effectiveness of applying the optimization method, designed controller using optimization are compared with the baseline controller that is designed only considering the time responses.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1561-1567
• /
• 2013

This paper is regarding the helicopter flight control law design for the handling quality performance. MIL-F-83300 and ADS-33E specification is used of the helicopter flight handling quality and to meet these requirements, ACAH type controller is required. This paper described the ACAH type controller design and performance evaluations. Helicopter dynamics first developed as nonlinear dynamics including rotor dynamics and then linear model was extracted from hovering to forward flight mode using trim condition. Control law used the model following to meet the handling qualities, the simple inverse model as feed forward gain, decoupling logic and phase model to decouple the axes, and linear model to calculate the coefficients. Handling quality evaluation used the matlab based Conduit tool and verified that Level 1 requirement is satisfied.