• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.12
• /
• pp.2296-2302
• /
• 2006

In this paper, we propose a development technique of high precision laser finder ranger within instrument distance 1km, instrument error less than 1 m by using pulse time of flight method in the 5m unit instrument and heterodyne method in the within Am unit. These propose methods can be more advanced to measurement velocity and more highly precision distance instrument not affected the strength of light. We also validate this usefulness.

• Aerospace Engineering and Technology
• /
• v.1 no.1
• /
• pp.84-96
• /
• 2002

The major goal of this research is to use as a baseline guide for a flight model design of power system of next domestic communication satellite. For this purpose, the EPS(Electrical Power Subsystem) is designed to compliance performance requirements specified in EPS subsystem specification during all expected spacecraft operations. The regulated electrical power bus gives 42.5V to the various spacecraft loads from PCDU(Power Control & Distribution Unit) and the solar arrays are composed of 6 panel, each panel has 3 circuits including 7 string. The battery system is comprised of two batteries consisting of 26 IPV(Individual-Pressure-Vessel) NiH2 cells. Each battery can be capable of delivering 2878Watt-hours at a 80% maximum DOD(Depth of Discharge) based on the nameplate capacity of 150 amper-hours.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.640-646
• /
• 2017

A GEN TEST of the auxiliary power unit of a T-50 series aircraft is performed as part of the operational test of its emergency power system on the ground before flight. At this time, the auxiliary power unit should be automatically turned off via the response signal of the ECU when power is not normally supplied to the emergency power system. If the correct operation of the emergency power system cannot be confirmed on the ground, it is not possible to proceed with the flight. This kind of defect is a major factor causing the operation rate of the aircraft to be decreased. The defect code identified by the ECU was confirmed as a defect in the inverter. However, the same defect was found after replacing the inverter. This report presents an improved method of identifying the cause of the defect by analyzing the response characteristics of the ECU and emergency power system and allows the ECU to be recognized as the cause of the defect if the inverter does not generate a voltage within a certain time. Also, the application of the improved method confirmed that it can satisfy the output request time of the emergency power system and effectively prevent the auto-shutdown of the auxiliary power unit.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.221-229
• /
• 2013

To achieve the best performance, the concept of drag reduced and power increased Human Power Aircraft(HPA) was presented by analyzing the HPAs in the world. To participate the '2012 HPA competition' in Korea, the streamlined fuselage and the simultaneous use of hands and feet were introduced. Furthermore the CFD analysis and power unit design were performed to verify the concept. In order to make the best use of streamlined fuselage effect, the fuselage shape design is important and to supply the hand power to the power unit, the control system design is important, also the test flight is required for validation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.2
• /
• pp.353-368
• /
• 2023

The four wing unmanned aerial vehicle owns the characteristics of small size, light weight, convenient operation and well stability. But it is easily disturbed by external environmental factors during flight with these disadvantages of short endurance and poor attitude solving ability. For solving these problems, a microprocessor based on STM32 chip is designed and the overall development is completed by the resources such as built-in timer and multi-function mode general-purpose input/output provided by the master micro controller unit, together with radio receiver, attitude meter, barometer, electronic speed control and other devices. The unmanned aerial vehicle can be remotely controlled and send radio waves to its corresponding receiver, control the analog level change of its corresponding channel pins. The master control chip can analyze and process the data to send multiple sets pulse signals of pulse width modulation to each electronic speed control. Then the electronic speed control will transform different pulse signals into different sizes of current value to drive the motor located in each direction of the frame to generate different rotational speed and generate lift force. To control the body of the unmanned aerial vehicle, so as to achieve the operator's requirements for attitude control, the PID controller based on Kalman filter is used to achieve quick response time and control accuracy. Test results show that the design is feasible.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.115-120
• /
• 2015

Until now, AOCS SW has used FPU which is one of CPU resources for satellite attitude control. And most of the SW Throughput was consumed to calculate Matrix Multiply. As SW throughput margin is decreasing seriously with shorter control period and more computational burden at next satellite programs, a dedicated HW matrix multiplier is absolutely required. This paper represents results of HW implementation & performance measurement and mentions several techniques for performance improvement, further works.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.4
• /
• pp.398-404
• /
• 2015

In this paper, we describe the design and performance of a prototype multi-rotor unmaned aerial vehicle( UAV) platform featuring an inertial measurement unit(IMU) based autonomous-flying for use in bluetooth communication environments. Although there has been a fair amount of study of free-flying UAV with multi-rotors, the more recent trend has been to outfit hexarotor helicopter with gimbal to support various services. This paper introduces the hardware and software systems toward very compact and autonomous hexarotors, where they can perform search, rescue, and surveillance missions without external assistance systems like ground station computers, high-performance remote control devices or vision system. The proposed system comprises the construction of the test hexarotor platform, the implementation of an IMU, mathematical modeling and simulation in the helicopter. Furthermore, the hexarotor helicopter with implemented IMU is connected with a micro controller unit(MCU)(ARM-cortex) board. The micro-controller is able to command the rotational speed of the rotors and to get the measurements of the IMU as input signals. The control simulation and experiment on the real system are implemented in the test platform, evaluated and compared against each other.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.7
• /
• pp.83-90
• /
• 2004

This paper describes on-board decentralized data acquisition system that acquires and encodes the numerous sensor data distributed on the big flight vehicles efficiently. The system's sub-units which have one encoder unit and several remote units were designed and simulated according to the communication protocols and the control, sequence logics based on the FPGA chip. And we have made the functional verification of the acquisition, collection and formatting of remote analog and digital data for the manufactured hardwares.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.5
• /
• pp.1-9
• /
• 2021

As part of the commercialization research of small gas turbine engines, starting and normal operation control logic research of small gas turbine engine was conducted. It was investigated how the igniter, starting motor and fuel pump/valve are controlled during the ignition and normal operation process and it was applied to the prototype engine control unit(ECU) of the small gas turbine engine for commercialization research. Based on the ground test results, an ECU for flight test is being developed, and after completion of the development, an altitude test will be performed through an altitude test facility of Korea Aerospace Research Institute.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.1
• /
• pp.47-55
• /
• 2012

This paper describes the developed HILS and test equipment in order to test the performances of MMW(Millimeter-Wave) seeker which can detect and track a high speed of short-range ballistic missile and aircraft. This system is used to 141 horn antenna array, array switching, and gain and phase control algorithm to simulate various kind of targets and trajectory of high speed and maneuver moving target. In addition, it simulates not only velocity and range for these targets but also clutter and jamming environments. System configuration and implementation and the measurement results of major subsystems such as target motion simulator, simulation signal generator, high speed data aquisition unit, and central control unit are presented. These systems could verify the detection and tracking performance of MMW seeker through dynamic real-time test based on simulation flight scenario.