• 품질경영학회지
• /
• 제41권3호
• /
• pp.433-441
• /
• 2013

Purpose: This study investigates software qualification procedures based on the FA-50 flight control software to satisfy high reliability and flight safety. Methods: We studied software qualification categories, standard/specification and developed country case. We proposed procedure to satisfy not only flight safety but also international standard. Results: The proposed software qualification procedure satisfied flight safety and airworthiness based on the testing result of the FA-50 flight control software. Conclusion: This paper showed an appropriate qualification procedures of the flight control software in domestic circumstance through the FA-50 flight control software qualification.

• 제어로봇시스템학회논문지
• /
• 제12권11호
• /
• pp.1130-1137
• /
• 2006

Relaxed Static Stability(RSS) concept has been applied to improve aerodynamic performance of modern version supersonic jet fighter aircraft. Therefore, the flight control systems are necessary to stabilizes the unstable aircraft and provides adequate handling qualities. The initial production flight control system are verified by flight test and it's always an elements of danger because of flight-critical nature of control law function and design error due to model base design method. These critical issues impact to flight safety, and it could be lead to a loss of aircraft and pilot's life. Therefore, development of an easily modifiable RFCS(Research Flight Control System) capable of reverting to a PFCS(Primary Flight Control System) of reliable control law must be developed to guarantee the flight safety. This paper addresses the concept of SSWM(Software Switching Mechanism) using the fader logic such as TFS(Transient Free Switch) based on T-50 flight control law. The result of the analysis based on non-real time simulation in-house software using SSWM reveals that the flight control system are switching between two computers without any problem.

• 한국항공우주학회지
• /
• 제40권6호
• /
• pp.548-554
• /
• 2012

항공기 비행조종컴퓨터 탑재 소프트웨어는 항공기의 손실뿐만 아니라 조종사의 생명에도 직결되는 비행안전 필수 소프트웨어로서 정확성과 무결성을 입증하기 위한 검증 및 확인(Verification & Validation)이 요구된다. 특히 비행안전 필수 소프트웨어는 검증을 위해 통합시험 단계에서 실제 환경과 유사한 운용 환경에 노출하여 소프트웨어 내부 상태를 실시간으로 모니터링하기 위한 환경이 요구된다. 본 논문에서는 표준 디버깅 인터페이스인 NEXUS 5001을 이용한 비행안전 필수 소프트웨어의 검증환경 개발에 대하여 기술하였다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권2호
• /
• pp.364-367
• /
• 2004

This paper presents the flight software of KoDSat (KSLV-l Demonstration Satellite) which performs demonstrating the KSLV-l (Korea Space Launch Vehicle-l)'s satellite launch capability. The KoDSat Flight Software executes in a single-processor, multi-function flight computer on the spacecraft, the OBC (On Board Computer). The flight software running on the single processor is responsible for all real-time processing associated with: processor startup and hardware initialization, task scheduling, RS422 handling function, command and data handling including uplink command and down-link telemetry, attitude determination and control, battery state of charge monitoring and control, thermal control processing.

• 천문학회보
• /
• 제44권2호
• /
• pp.58.1-58.1
• /
• 2019

We have developed Ground Software (GSW) of BITSE. The ground software includes mission operation software, data visualization software and data processing software. Mission operation software is implemented using COSMOS. COSMOS is a command and control system providing commanding, scripting and data visualization capabilities for embedded systems. Mission operation software send commands to flight software and control coronagraph. It displays every telemetry packets and provides realtime graphing of telemetry data. Data visualization software is used to display and analyze science image data in real time. It is graphical user interface (GUI) and has various functions such as directory listing, image display, and intensity profile. The data visualization software shows also image information which is FITS header, pixel resolution, and histogram. It helps users to confirm alignment and exposure time during the mission. Data processing software creates 4-channel polarization data from raw data.

• 시스템엔지니어링학술지
• /
• 제1권2호
• /
• pp.43-48
• /
• 2005

This paper describes the results of applying States and Modes Analysis, one of the requirements analysis techniques, to the development requirements of flight control software for Smart UAV. State/mode table enabled us to investigate various operation and design concepts, and as a result essential requirements for flight control software were established without omitting necessary requirements. Through the use of scenario-specific state transition diagrams, dynamic behaviours and control/response interfaces between each state and mode could been clearly identified, which made it possible to establish requirements related to dynamic behaviours of states and modes which are essential to the design of flight control software.

• 항공우주시스템공학회지
• /
• 제9권1호
• /
• pp.12-18
• /
• 2015

The inter-conversion between different control laws in flight has a lot of risk. The SWM(Switching Mechanism) including logic and stand-by mode is designed to analyze the transient response of aircraft during inter-conversion between different control laws, based on the in-house software for non-real-time and real-time simulation. The SWM applies the fader logic of TFS(Transient Free Switch) to minimize the transient response of an aircraft during the inter-conversion, and applies the reset '0' type of the stand-by mode to prevent surface saturation due to integrator effect in the disengaged flight control law. The transition time is also important to minimize the objectionable transient response in the inter-conversion, as well as the transition control law design. This paper addresses the results of non-real-time simulation for the characteristics of transient response to different transition time to select the adequate transient time, and the real-time pilot evaluation, using SSWM(Software Switching Mechanism) and HSWM(Hardware Switching Mechanism), which is met for Level 1 flying qualities and assures safety of flight.

• 항공우주기술
• /
• 제10권1호
• /
• pp.141-148
• /
• 2011

저궤도 관측위성에는 버스 히터, 탑재체 히터, 배터리 내부 히터 등 다양한 히터들이 각각의 해당 영역에 대한 열제어를 위해 존재한다. 이러한 히터들의 제어는 서미스터에 의해 수행되거나 비행소프트웨어에 의해 제어될 수 있다. 각 히터들은 설치된 위치, 텔레메트리로 전송하기 위한 분류, 사용되는 서브시스템 등에 따라서 여러 형태의 그룹으로 나눌 수 있으며, 비행소프트웨어에서는 히터제어를 위한 정보들을 다양한 배열에 저장하는데 각 히터마다 고유의 인덱스를 부여하여 구분하는 방법을 사용할 수 있다. 각 히터들이 분류하는 방식에 따라 서로 다른 그룹에 속하기도 하고 비행소프트웨어 로직에서 사용되는 히터정보가 어느 히터, 또는 어느 그룹의 정보인지를 판별하는데 어려움이 있을 수 있다. 본 문서에서는 저궤도 관측위성의 일반적인 히터 제어를 위한 비행소프트웨어의 설계에 대해 기술하고, 히터들의 그룹 및 배열의 활용과 특별한 관리가 필요한 히터들의 제어방식에 대하여 설명한다.

• 제어로봇시스템학회논문지
• /
• 제14권8호
• /
• pp.824-836
• /
• 2008

Relaxed static stability(RSS) concept has been applied to improve aerodynamic performance of modern version supersonic jet fighter aircraft. Therefore, flight control systems are necessary to stabilize an unstable aircraft, and provides adequate handling qualities and achieve performance enhancements. Standard FCSDVP (Flight Control System Design and Verification Process) is provided to reduce development period of the flight control system. In addition, if this process is employed in developing flight control system, it reduces the trial and error for development and verification of flight control system. This paper addresses the flight control system design and verification process for the RSS aircraft utilizing design goal based on military specifications, linear and nonlinear system design and verification based on universal software, handling quality test based on HILS(Hardware In-the-Loop Simulator) environment, and ground and flight test results to verify aircraft dynamic flight responses.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2004년도 춘계학술대회 논문집
• /
• pp.142-147
• /
• 2004

It is very difficult to acquire high-fidelity flight test data for small airplanes such as typical unmanned aerial vehicles because MEMS-type small sensors used in the tests do not present reliable data in general. Besides, it is not practical to conduct expensive flight tests for low-cost small airplanes in order to simulate their flight characteristics. A practical approach to obtain acceptable flight data, including stability and control derivatives and data of weight and balance, is proposed in this study. Aircraft design software such as Darcorp's AAA is used to generate aerodynamic data for small airplanes, and moments of inertia are calculated using CATIA, structural design software. These flight data from simulation software are evaluated subjectively and tailored using simulation flight by experienced pilots, based on the certified procedures in FAA AC 120-45A and 40B, which are used for manned airplane simulators.