• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.995-996
• /
• 2011

전압의 시간적 변동으로 인하여 시각적 혹은 심리적으로 인식되는 불편함을 나타내는 플리커는 인간의 생체심리학적 인지능력과 관련이 있으며, 인간의 눈은 0.3%에서 0.4%의 매우 작은 전압변동에 대하여 5Hz에서 20Hz의 변조 주파수에서 민감하게 반응하며, IEC는 실증시험을 통해 8.8Hz의 전압변동에서 가장 민감하게 인식하는 것을 확인하였다. 이러한 플리커는 시각적 불쾌감과 함께 지속적인 경우 회전기와 같은 기기들에 악영향을 주며, 전자장비, 전구, CRT 장비, UPS 동기상실, 제어설비 및 보호설비의 오동작 발생으로 효과적으로 관리가 필요하다. 현재 국내 전기품질 관리기준은 IEC 국제규격을 바탕으로 제 개정 작업이 진행되고 있어 본 논문에서는 IEC 61000-3-7 국제규격을 국내 적용을 위해 필요한 국내 전력계통의 플리커 전달계수를 제시하였다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.3
• /
• pp.369-376
• /
• 2018

The ability to recover the nearly limitless supply of uranium contained within the world's oceans would provide supply security to uranium based fuel cycles. Therefore, in addition to U.S. national laboratories conducting R&D on a system capable of harvesting seawater uranium, a number of collaborative university partners have developed alternative technologies to complement the national laboratory scheme. This works summarizes the systems analysis of such novel uranium recovery technologies along with their potential impacts on seawater uranium recovery. While implementation of some recent developments can reduce the cost of seawater uranium by up to 30%, other researchers have sought to address a weakness while maintaining cost competitiveness.

• Journal of Multimedia Information System
• /
• v.6 no.4
• /
• pp.203-208
• /
• 2019

Fast operation of a CNN based object detection is important in many application areas. It is an efficient approach to reduce the size of an input image. However, it is difficult to find an area that includes a target object with minimal computation. This paper proposes a ROI detection method that is fast and robust to noise. The proposed method is not affected by a flicker line noise that is a kind of aliasing between camera and LED light. Fast operation is achieved by using down-sampling efficiently. The accuracy of the proposed ROI detection method is 92.5% and the operation time for a frame with a resolution of 640 × 360 is 0.388msec.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.57
• /
• pp.1-10
• /
• 2000

The purpose of this paper is to propose a method of rest to reduce work load of night shift workers for night shift work. The experiment was carried out 10minutes preparing time, 45minutes first work, 10minutes first rest, 45minutes second work, 10minutes second rest between 2 and 4 o'clock that the lowest physiological function of workers. The methods of rest set up as four patterns (1) non-action rest (2) non-action rest + listening music (3) action rest + non-action rest, (4) action rest + non-action rest + listening music. For the measurements of experiment, heart rates(R-R interval), critical flicker fusion frequency(CFF), blood pressure, oral temperature, reaction time and error rates were considered as criteria for work performance. As a result, action rest + non-action rest and action rest + non-action rest + listening music were more effective to reduce work load additional work than non-action rest and non-action rest + listening music.

• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.2
• /
• pp.90-95
• /
• 2015

This paper describes IEC 61727 standard of Photovoltaic (PV) systems -Characteristics of the utility interface. IEC 61727 standard tests include utility compatibility and personnel safety and equipment protection of PV inverter performance functions. Especially utility compatibility part includes test items of 1) voltage, current and frequency, 2) normal voltage operating range, 3) flicker, 4) DC injection, 5) normal frequency operating range, 6) harmonics and 7) waveform distortion, 8) power factor of PV inverter. Also personnel safety and equipment protection part includes test items 1)loss of utility voltage, 2)over/under voltage and frequency, 3)Islanding protection, 4)response to utility recovery, 5)earthing, 6)short circuit protection, 7)Isolation and switching of PV inverter. In this paper, each item of IEC 61727 standard test is studied and analyzed and finally full tested by PV inverter performance function.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.305-308
• /
• 2009

This paper presents the design and analysis of RF Front End for Wireless Heartbeat measurement System. In this work LNA, an inductor connected at the gate of the cascode transistor and capacitive cross-coupling are strategically combined to reduce the noise and the nonlinearity influences of the cascode transistors in a differential LNA. The Mixer is implemented by using the Gilbert-type configuration, cross pmos injection technique and the resonating technique for the tail capacitance. The resulting LNA achieves 1.26 dB NF, better than 1.88dB NF Typical Also Mixer resulting achieves 9.8dB at 100KHz.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.723-728
• /
• 2006

In this paper, we present a new system, OPTISCOPE SA, especially designed for precise measurement of temporal behavior of LCD displays. We show that gray to gray level response time measurement requires a very sensitive and precise instrument and also that the capacity to measure luminance levels and gamma curve can be useful. Quite often, precise evaluation of LCD response time needs also use of low pass and stop band filters to suppress noise and flicker. Low pass filters affect the results but can be corrected for simple temporal behaviors. For complex temporal behaviors like those observed for overdriven LCDs, we show that direct adjustment of theoretical responses is much more efficient to get a complete picture of the temporal behavior of such displays.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.495-498
• /
• 2008

PCC(Point of Common Coupling) is measured by waveform in power system. Analyzing their frequency, it is possible to get various indices such as THD(Total Harmonic Distortion), TDD(Total Demand Distortion), and VF(Voltage Flicker), and then the harmonic can be evaluated from them. In this paper, the harmonic effect on the power supply which is generated by the vehicle is presented by comparing harmonics with the substation and the vehicle.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.210-212
• /
• 2018

A new switching mode has been proposed to obtain high power factor and low THD in single stage AC-DC converter. The conventional voltage mode control in critical conduction mode distorts input current shape with poor THD in flyback topology. Once TRIAC dimmer is connected, visible flicker in the LED lamp is easily detected due to a lack of TRAIC holding current near the input voltage zero cross. The newly proposed method can shape the input current by providing a desired reference voltage so that low THD is obtained by ideal sinusoidal input current in case of no dimmer connection and flat input current performs good TRIAC dimmer compatibility in phase-cut dimming condition. To confirm the validity of the proposed method, theoretical analysis and experimental result from 8W dimmable LED lighting system are presented.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.31 no.11
• /
• pp.133-140
• /
• 1982

In recent years, a number of thyristor-controlled shunt compensators have been used in industrial and utility systems for phase balancing, power-factor correction and flicker reduction. This paper describes a simple and basic control scheme and circuits for shunt compensator with a fixed capacitor and thyristor-controlled reactor. Feedforward-control scheme is applied, and compensating currents are computed from the symmetrical components of the disturbed system. A 8 bit microprocessor is used for the computation of the compensating currents as well as for the measurements of the symmetric components. A 3-phase 1 KVA compensator is developed and a good reduction of the unbalance factor of the power source is achieved using it.