• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.152-152
• /
• 2016

We studied the effect of the silver grid size on graphene transparent conducting films for flexible organic solar cells (OSCs). The silver grid was used an assistant layer of the graphene to reduce the sheet resistance of substrates. Silver grid with various graphene sizes for optimizing transmittance and sheet resistance of substrates were fabricated on polyethylene terephthalate (PET) substrates to form the hybrid films. The optimized grid geometry on the single layer graphene (SLG) was the grid dimension $200{\mu}m{\times}200{\mu}m{\times}50nm{\times}2{\mu}m$ (length ${\times}$ width ${\times}$ height ${\times}$ linewidth), where the sheet resistance was $55.73{\Omega}/square$ with the average transmittance of ~ 92.83 % at 550 nm. The properties of the OSCs fabricated using SLG with optimized silver grids on PET substrates show a short circuit current of $10.9mA/cm^2$, an open circuit voltage of 0.58 V, a fill factor of 60.8 %, and a power conversion efficiency (PCE) of 3.9 %. The PCE was improved about 91% than that of the OSCs using the SLG without the silver grid. These results demonstrate that the optimized grid geometry to the based on the graphene transparent electrodes contribute to improving the performance of OSCs.

• 마이크로전자및패키징학회지
• /
• 제25권2호
• /
• pp.31-34
• /
• 2018

차세대 유연 광전소자 적용을 위한 금속-산화물 샌드위치 구조인 ZnO/Al/ZnO 박막의 유연투명전극 기초연구를 수행하였다. 모든 증착은 유연성을 가지는 PET 기판 상에서 이루어졌으며, 상 하부 ZnO층의 두께가 광 투과도에 미치는 영향을 확인하기 위하여 Al 층의 두께는 모두 8 nm로 고정시킨 채 상부 ZnO 층의 두께는 5-70 nm, 하부 ZnO 층의 두께는 2.5-20 nm까지 변화를 주었다. 가시광선영역(380 nm-770 nm) 파장대를 가지는 광원의 투과도에 대하여 측정한 결과, 상부 ZnO 층의 두께가 30 nm이며 하부 ZnO 층의 경우 2.5 nm 일 때 가장 높은 투과도를 보였다. 400 nm 파장기준 투과도 62%, 면저항 $19{\Omega}/{\Box}$, 그리고 곡률반경 5 mm 조건에서의 휨 테스트 후 면저항과 투과도의 변화가 발생하지 않는 ZnO/Al/ZnO 유연투명전극 결과를 보고한다.

• 한국전기전자재료학회논문지
• /
• 제20권9호
• /
• pp.798-801
• /
• 2007

Multilayer transparent electrodes, having a much lower electrical resistance than the widely used transparent conducting oxide electrodes, were prepared by using radio frequency magnetron sputtering. The multilayer structure consisted of five layers, indium tin oxided (ITO)/zinc oxide (ZnO)/Ag/zinc oxide (ZnO)/ITO. With about 50 nm thick ITO films, the multilayer showed a high optical transmittance in the visible range of the spectrum and had color neutrality. The electrical and optical properties of ITO/ZnO/Ag/ZnO/ITO multilayer were changed mainly by Ag film properties, which were affected by the deposition process of the upper layer. Especially ZnO layer was improved to adhesion of Ag and ITO. A high quality transparent electrode, having a resistance as low as and a high optical transmittance of 91% at 550 nm, was obtained. It could satisfy the requirement for the flexible OLED and LCD.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.397-397
• /
• 2007

Multilayer transparent electrodes, having a much lower electrical resistance than the widely used transparent conducting oxide electrodes, were prepared by using radio frequency magnetron sputtering. The multilayer structure consisted of five layers, indium tin oxided(ITO)/zinc oxide(ZnO)/Ag/oxide(ZnO)/ITO. With about 50nm thick ITO films, the multilayer showed a high optical transmittance in the visible range of the spectrum and had color neutrality. The electrical and optical properties of ITO/ZnO/Ag/ZnO/ITO multilayer were changed mainly by Ag film properties, which were affected by the deposition process of the upper layer. Especially ZnO layer was improved to adhesion of Ag and ITO. A high quality transparent electrode, having a resistance as low as and a high optical transmittance of 91% at 550nm, was obtained. It could satisfy the requirement for the flexible OLED and LCD.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.388-388
• /
• 2011

Graphene, with its unique physical and structural properties, has recently become a proving ground for various physical phenomena, and is a promising candidate for a variety of electronic device and flexible display applications. The physical properties of graphene depend directly on the thickness. These properties lead to the possibility of its application in high-performance transparent conducting films (TCFs). Compared to indium tin oxide (ITO) electrodes, which have a typical sheet resistance of ~60 ${\Omega}/sq$ and ~85% transmittance in the visible range, the chemical vapor deposition (CVD) synthesized graphene electrodes have a higher transmittance in the visible to IR region and are more robust under bending. Nevertheless, the lowest sheet resistance of the currently available CVD graphene electrodes is higher than that of ITO. Here, we report an ingenious strategy, irradiation of MeV electron beam (e-beam) at room temperature under ambient condition,for obtaining size-homogeneous gold nanoparticle decorated on graphene. The nano-particlization promoted by MeV e-beam irradiation was investigated by transmission electron microscopy, electron energy loss spectroscopy elemental mapping, and energy dispersive X-ray spectroscopy. These results clearly revealed that gold nanoparticle with 10~15 nm in mean size were decorated along the surface of the graphene after 1.0 MeV-e-beam irradiation. The fabrication high-performance TCF with optimized doping condition showed a sheet resistance of ~150 ${\Omega}/sq$ at 94% transmittance. A chemical transformation and charge transfer for the metal gold nanoparticle were systematically explored by X-ray photoelectron spectroscopy and Raman spectroscopy. This approach advances the numerous applications of graphene films as transparent conducting electrodes.

• 센서학회지
• /
• 제28권6호
• /
• pp.366-370
• /
• 2019

In this study, we have successfully fabricated a highly conductive transparent electrode using Ag nanowires, based on piezoelectric polyvinylidene difluoride (PVDF) film, that can be applied as transparent and flexible speakers. The structural morphology of the Ag nanowires was confirmed by a detailed scanning electron microscopy. Ultraviolet-visible spectroscopy demonstrated that the transparent electrode fabricated by the Ag nanowires exhibited a transmittance of above 70%. The transparent electrode also showed very low sheet resistance with high flexibility. We have further developed an anti-oxidation coating layer by using a tetraethyl orthosilicate-poly trimethyloxyphenylsilane (TEOS-PTMS) slurry technique. It was confirmed that the transmittance and sheet resistance of the antioxidant film depends critically on the humidity of the film surface. We believe such Ag nanowire electrodes are a very promising next-generation transparent electrode technology that can be used in future flexible and transparent devices.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.490.1-490.1
• /
• 2014

The ZnO nanowire (NW)-based nanogenerators (NGs) can have rectifying current and potential generated by the coupled piezoelectric and semiconducting properties of ZnO by variety of external stimulation such as pushing, bending and stretching. So, ZnO NGs needed to enhance durability for stable properties of NGs. The durability of the metal electrodes used in the typical ZnO nanogenerators(NGs) is unstable for both electrical and mechanical stability. Indium tin oxide (ITO) is used as transparent flexible electrode but because of high cost and limited supply of indium, the fragility and lack of flexibility of ITO layers, alternatives are being sought. It is expected that carbon nanotube and Ag nanowire conductive coatings could be a prospective replacement. In this work, we demonstrated transparent flexible ZnO NGs by using CNT/Ag nanowire hybrid electrode, in which electrical and mechanical stability of top electrode has been improved. We grew vertical type ZnO NW by hydrothermal method and ZnO NW was coated with hybrid silicone coating solution as capping layer to enhance adhesion and durability of ZNW. We coated the CNT/Ag nanowire hybrid electrode by using bar coating system on a capping layer. Power generation of the ZnO NG is measured by using a picoammeter, a oscilloscope and confirmed surface condition with FE-SEM. As a results, the NGs using the CNT/Ag NW hybrid electrode show 75% transparency at wavelength 550 nm and small change of the resistance of the electrode after bending test. It will be discussed the effect of the improved flexibility of top electrode on power generation enhancement of ZnO NGs.

• 공업화학
• /
• 제26권6호
• /
• pp.640-647
• /
• 2015

투명 전극의 응용분야가 확대되고 시장의 규모가 커짐에 따라 기존 투명 전극 재료인 ITO (Indium Tin Oxide)를 대체할 차세대 투명전극의 개발에 관심이 집중되고 있다. 다양한 후보군 중에서도 대표적인 전도성 고분자인 PEDOT : PSS [poly(3,4-ethylenedioxythiophene) : poly(styrene sulfonate)]는 기계적 유연성을 갖고 있으면서도 소재와 공정 상의 가격 경쟁력이 크기 때문에 미래 소자 구현을 위한 투명전극 재료로 주목을 받고 있으며, 현재 PEDOT : PSS의 전기전도도 수준을 ITO나 금속의 수준으로 향상시키기 위해 다양한 화학적/물리적 처리를 통한 기능성 향상에 많은 연구가 진행 중이다. 본 총설에서는 전도성 고분자의 전기 전도도를 향상시키기 위한 다양한 공정 기술에 대한 연구 현황을 짚어보고자 한다. 대표적으로 유기용매, 이온성 액체, 계면활성제 등과 같은 첨가제와 박막에 대한 산 처리 공정, 물리적 인장을 통한 전기전도도 향상 연구를 들 수 있다. 또한 이러한 공정을 적용하여 전도성 고분자 투명 전극을 전자 및 에너지 소자에 응용한 사례도 간략히 소개하고자 한다.

• 마이크로전자및패키징학회지
• /
• 제25권2호
• /
• pp.19-23
• /
• 2018

광전소자용 투명전극으로 적용하기 위한 초박형 Al 박막에 대한 기초연구를 수행하였다. 유리 기판 상에 3-12 nm의 두께를 가지는 Al 박막을 형성하였으며, 박막의 두께가 7 nm 이상일 때부터 면저항이 측정되었으며 두께가 증가할 때 면저항이 점진적으로 감소하였다. 박막 내 그레인 크기(Grain size)는 두께가 증가할수록 비례하여 증가하였다. 광 투과도의 경우 가시광선영역(380~770 nm) 파장 기준으로, 3 nm 박막 두께에서 평균 85%의 투과도가 측정된 데 반하여, 4, 5 nm 두께에서 평균 50, 60%로 급격하게 감소되기 시작하며 그 이후 두께 증가에 따라 투과도가 점진적으로 감소하였다. 본 연구결과는 향후 Oxide/Metal/Oxide(OMO) 구조의 고투과, 저저항 투명전극 적용을 위한 기초 결과로 활용될 것으로 기대된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.188-188
• /
• 2012

Graphene, with its unique physical and structural properties, has recently become a proving ground for various physical phenomena, and is a promising candidate for a variety of electronic device and flexible display applications. Compared to indium tin oxide (ITO) electrodes, which have a typical sheet resistance of ${\sim}60{\Omega}$/sq and ~85% transmittance in the visible range, the chemical vapor deposition (CVD) synthesized graphene electrodes have a higher transmittance in the visible to IR region and are more robust under bending. Nevertheless, the lowest sheet resistance of the currently available CVD graphene electrodes is higher than that of ITO. In this study, we report a creative strategy, irradiation of microwave at room temperature under vacuum, for obtaining size-homogeneous gold nano-particle doping on graphene. The gold nano-particlization promoted by microwave irradiation was investigated by transmission electron microscopy, electron energy loss spectroscopy elemental mapping. These results clearly revealed that gold nanoparticle with ${\geq}30$ nm in mean size were decorated along the surface of the graphene after microwave irradiation. The fabrication high-performance transparent conducting film with optimized doping condition showed a sheet resistance of ${\geq}100{\Omega}$/sq. at ~90% transmittance. This approach advances the numerous applications of graphene films as transparent conducting electrodes.