• 산업경영시스템학회지
• /
• 제22권50호
• /
• pp.127-137
• /
• 1999

This study is concerned with the loading problems in flexible manufacturing system(FMS). The loading problem in FMS is a complex one, when the number of machine and job is increased. It may be time-consuming and even impossible to achieve an optimal solution about this problem mathematically. Thus, a heuristic method is recommended in order to gain near-optimal solutions in a practically acceptable time. A new loading algorithm is developed with a multi-criterion objective of considering the workload unbalance, and maximizing the machine utilization, throughput for critical resources such as the number of tool slots and the number of working hours in a scheduling period and so on. The results of SAS analysis indicated that true average throughput of proposed heuristic loading statistically exceeds that of Shanker and Srinivasulus loading algorithm at the significance level of 0.1.

• 대한산업공학회지
• /
• 제14권2호
• /
• pp.131-141
• /
• 1988

As flexible manufacturing technology has become available across a broad range of applications, an increasingly large number of firms have confronted decisions about when to adopt the FMS technology and the size of FMS at that time. For small to medium size firms that should invest under budget limitation and high investment risk, proper size of FMS adoption at proper time is very important. In this paper the discrete optimal control theory has been used to make decisions about the size and timing of FMS capacity expansion over a planning period. Sensitivity analysis is presented for analysing the behavior of the model to variations of model parameters.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.448-451
• /
• 1999

This paper describes controller development for a dynamic voltage compensator using a shunt diode converter and series inverter. The control system was designed using 1/4 period integrator and vector relationship between the supply voltage and load voltage. A simulation model and scaled hardware model were developed for analyzing performance of the controller and the whole system. Both results confirm that the dynamic compensator can restore the load voltage under the fault of the distribution system.

• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.1994-2003
• /
• 2003

The vibration of a flexible cantilever tube with nonlinear constraints when it is subjected to flow internally with fluids is examined by experimental and theoretical analysis. These kinds of studies have been performed to find the existence of chaotic motion. In this paper, the important parameters of the system leading to such a chaotic motion such as Young's modulus and the coefficient of viscoelastic damping are discussed. The parameters are investigated by means of system identification so that comparisons are made between numerical analysis using the design parameters and the experimental results. The chaotic region led by several period-doubling bifurcations beyond the Hopf bifurcation is also re-established with phase portraits, bifurcation diagram and Lyapunov exponent so that one can define optimal parameters for system design.

• 응용통계연구
• /
• 제22권3호
• /
• pp.607-616
• /
• 2009

In many epidemiological studies, the occurrence times of the event of interest are right-censored or interval censored. In certain situations such as the AIDS data, however, the incubation period which is the time between HIV infection and the diagnosis of AIDS is usually doubly censored. In this paper, we impute the interval censored HIV infection time using three imputation methods. Mid imputation, conditional mean imputation and approximate Bayesian bootstrap are implemented to obtain right censored data, and then Gibbs sampler is used to estimate the coefficient factor of the incubation period. By using Bayesian approach, flexible modeling and the use of prior information is available. We applied both parametric and semi-parametric methods for estimating the effect of the covariate and compared the imputation results incorporating prior information for the covariate effects.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.495-500
• /
• 2003

The vibration of a flexible cantilever tube with nonlinear constraints when it is subjected to flow internally with fluids is examined by experiment and theoretical analysis. These kind of studies have often been performed that finds the existence of chaotic motion. In this paper, the important parameters of the system leading to such a chaotic motion such as Young's modulus and coefficient of viscoelasticity in tube material are discussed. The parameters are investigated by means of a system identification so that comparisons are made between numerical analysis using the parameters of a handbook and the experimental results. The chaotic region led by several period-doubling bifurcations beyond the Hopf bifurcation is also re-established with phase portraits and bifurcation diagram so that one can define optimal parameters for system design.

• Tuberculosis and Respiratory Diseases
• /
• 제44권5호
• /
• pp.1166-1171
• /
• 1997

저자들은 4개월 동안 지속된 폐렴 환자에서 굴곡성기관지내시경을 이용해서 기도이물인 새우를 제거한 예를 경험하였기에 문헌고찰과 함께 보고하는 바이다.

• Communications for Statistical Applications and Methods
• /
• 제16권2호
• /
• pp.249-264
• /
• 2009

지수연동형 보험상품(EIA: Equity-indexed annuities)은 주식시장의 수익률과 연계하여 보험상품의 수익률이 결정되며 주식시장의 수익률이 낮은 경우에도 최소보장 수익률이 제공되는 상품이다 EIA의 수익률은 주가 수익률에 일정 비율을 곱하고 이 값과 최소보장수익률과 비교하여 높은 값을 수익률로 정의한다. 여기서 주가수익률에 곱하는 일정비율을 참여율(Participation rate)이라고 부른다. 본 논문에서는 수익률을 결정하는 주가지수와 일정수준을 넘는 여부를 결정하는 주가지수를 다른 지수로 사용하는 Outside Barrier가 내재된 보험 상품을 제안하고자 한다. 특히 Outside Barrier조건의 결정을 계약기간 전체가 아닌 계약기간의 일부분으로 선정한 것이 특징이다. 이러한 수익률 구조를 반영하는 가격 공식을 기댓값 계산을 통하여 유도하고 수치해석 기법을 이용하여 최소보장이율, Rebate, barrier 수준, 주가 변동성, 상관계수 및 관측기간 등의 변수가 참여율의 결정 에 어떤 영향을 미치는지를 알아보고자 한다.

• 대한의용생체공학회:의공학회지
• /
• 제20권3호
• /
• pp.315-321
• /
• 1999

본 논문에서는 근전도의 신호만으로 동적 운동시 근육에 발생하는 근력 예측을 위한 수학적 모델의 개발에 목표를 두고 있다. 이를 위하여 인체의 관절 운동중에 발생하는 근력과 근전도의 상관관계를 규명하는 것이 필요하기 때문에 동역학적 관절모델로서 수근관절을 포함한 주관절이 고려되었으며, 기구학 및 동역학 해석을 위하여 2개의 자유도를 갖는 Flexible Goniometer 로 관절의 각변위, 각속도, 가가속도등의 데이터를 실시간 측정하였다. 근전도 측정을 위해서는 비교적 신호가 뚜렷한 이두박근이 선정되었으며, 운동시 발생하는 이두박근의 근전도 신호는 표면전극을 이용한 다태널 Noraxon EMG 장치로 측정하였다. 결과로서, 근력과 근전도의 측정 시간에 따른 적분값의 비교는 1차 함수의 형태로 비례하는 상관관계로 표현됨을 알 수 있었으며, 동적인 운동시 발생하는 근수축을 동심 수축 구간( Concentric Contraction Period)과 편심 수축 구간(Eccentric Contraction Period)으로 양분하여 분석하였을 때도 근력과 근전도의 측정 시간에 따른 적분값의 비교는 1차 함수의 형태로 비례함을 알 수 있었다. 이 상관관계식을 이용하여 근전도 신호 측정을 통하여 관절에 작용하는 근육의 근력 예측이 가능함을 알 수 있었으며, 각기 다른 신체 부위의 관절에도 적용할 수 있는 가능성을 보여주고 있다.

• Smart Structures and Systems
• /
• 제25권1호
• /
• pp.111-122
• /
• 2020

Researchers up to date have introduced several Structural Health Monitoring (SHM) techniques with varying advantages and drawbacks for each. Satellite positioning systems (GPS, GLONASS and GALILEO) based techniques proved to be promising, especially for high natural period structures. Particularly, the GPS has proved sufficient performance and reasonable accuracy in tracking real time dynamic displacements of flexible structures independent of atmospheric conditions, temperature variations and visibility of the monitored object. Tall structures are particularly sensitive to oscillations produced by different sources of dynamic actions; such as typhoons. Wind forces induce in the structure both longitudinal and perpendicular displacements with respect to the wind direction, resulting in torsional effects, which are usually more complex to be detected. To efficiently track the horizontal rotations of the in-plane sections of such flexible structures, two main issues have to be considered: a suitable sensor topology (i.e., location, installation, and combination of sensors), and the methodology used to process the data recorded by sensors. This paper reports the contributions of the measurements recorded from dual frequency GPS receivers and uni-axial accelerometers in a full-scale experimental campaign. The Canton tower in Guangzhou-China is the case study of this research, which is instrumented with a long-term structural health monitoring system deploying both accelerometers and GPS receivers. The elaboration of combining the obtained rather long records provided by these two types of sensors in detecting the torsional behavior of the tower under ambient vibration condition and during strong wind events is discussed in this paper. Results confirmed the reliability of GPS receivers in obtaining the dynamic characteristics of the system, and its ability to capture the torsional response of the tower when used alone or when they are combined with accelerometers integrated data.