• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.400.2-400.2
• /
• 2016

Dye-sensitized solar cells (DSSCs) have been widely investigated as a next generation solar cell because of their simple structure and low manufacturing cost. To realize a commercially competitive technology of DSSCs, it is imperative to employ a technique to prepare nanocrystlline thin film on the flexible organic substrate, aiming at increasing the flexibility and reducing the weight as well as the overall device thickness of DSSCs. The key operation of glass-to-plastic substrates conversion is to prepare mesoporous TiO2 thin film at low temperature with a high surface area for dye adsorption and a high degree of crystallinity for fast transport of electrons. However, the electron transport in the TiO2 film synthesized at low temperature is very poor. So, in this study, TiO2 films synthesized at high temperature were transferred on the selective substrate. We fabricated DSSCs at low temperature using this method. So, we confirmed that the performance of DSSCs using TiO2 films synthesized at high temperature was improved.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.4
• /
• pp.107-112
• /
• 2005

In this study, the dynamic analysis is performed fur predicting the transmitted force to flexible human body induced by prototype HIF(High Impulsive force) device operation, which is partially assembled by major parts. A beam-mass model and a shear-structure model are used for the flexible mount structure and their dynamic behavior are investigated by experimental results under rigid/flexible mount conditions using a general purpose device. From the test result of prototype device in rigid mount condition, the transmitted force to human body which can not be measured directly, is estimated based on the proved mount structure model.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.24 no.2
• /
• pp.1-15
• /
• 1999

This research involves the development and evaluation of a work flow control model for a type of flexible manufacturing system(FMS) called a flexible flow line(FFL). The control model can be considered as a kind of hybrid intelligent model in that it utilizes both computer simulation and neural network technique. Training data sets were obtained using computer simulation of typical FFL states. And these data sets were used to train the neural network model. The model can easily incorporate particular aspects of a specific FFL such as limited buffer capacity and dispatching rules used. It also dynamically adapts to system uncertainty caused by such factors as machine breakdowns. Performance of the control model is shown to be superior to the random releasing method and the Minimal Part Set(MPS) heuristic in terms of machine utilization and work-in-process inventory level.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.233-238
• /
• 2001

In the design and operation of robot arms with flexible links, the equations of motion are required to exactly model the interaction between rigid motion and elastic motion and to be formulated efficiently. Thus, the flexible link is represented on the basis of the D-H rigid link represented to measure the elastic deformation. The equations of motion of robot arms, which are configured by the generalized coordinates of elastic and rigid degrees of freedom, are formulated by using F.E.M to model complex shaped links systematically and by eleminating elastic mode of higher order that does not largely affect option to reduce the number of elastic degree of freedom. Finally presented is the result of simulation to flexible robotic arm whose joints are controlled by direct or PD control.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.189-192
• /
• 2008

A 5.8-inch wide-QQVGA flexible full-color active-matrix OLED display was fabricated on a plastic substrate. Low-voltage-operation organic TFTs and high-efficiency phosphorescent OLEDs were used as the backplane and emissive pixels, respectively. The fabricated display clearly showed color moving images when the driving voltage was below 15 V.

• International Journal of Precision Engineering and Manufacturing
• /
• v.1 no.2
• /
• pp.105-114
• /
• 2000

An output feedback control (OFC) is presented for a linear stochastic system with known disturbance and applied to a flexible spacecraft for the reduction of residual vibration while allowing the natural deflection during operation. By converting the tracking problem into regulator problem, the OFC minimizes the expected value of a guadratic objective function composing of error stats which always remain on the intersection of sliding hypersurfaces. For the numerical evaluation with a flexible spacecraft, a large slewing maneuver strategy is devised with a tracking model for nominal trajectory and start-cost-stop strategy for economical maneuver in conjunction with the input shaping technique. The performance and efficacy of the proposed control scheme are illustrated with the comparison of different maneuver strategies.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.3
• /
• pp.307-312
• /
• 2010

In this study, advanced computational technique for mechatronic analysis has been developed for the efficient design and test of typical machine tool models. Flexible multi-body dynamic (FMBD) analysis method combined with motion controller including control logics is used to simulate typical operation conditions. The present FMBD machine tool model is composed of flexible column structure, rigid body spindle, vertical motion guide (arm) and screw elements. Driving motor clement with rotating degree-of-freedom is interconnected and governed by the designed Matlab Simulink control logic, and then the position of the spindle is feedback into the control logic. It is practically shown from the results that the investigation of designed machine tools with controller can be effectively conducted and verified.

• Journal of Sensor Science and Technology
• /
• v.31 no.5
• /
• pp.293-300
• /
• 2022

Flexible, wearable, and implantable electronic sensors have started to gain popularity in improving the quality of life of sick and healthy people, shifting the future paradigm with high sensitivity. However, conventional technologies with a limited lifespan occasionally limit their continued usage, resulting in a high cost. In addition, traditional battery technologies with a short lifespan frequently limit operation, resulting in a substantial challenge to their growth. Subsequently, utilizing human biomechanical energy is extensively preferred motion for biologically integrated, self-powered, functioning devices. Ideally suited for this purpose are piezoelectric energy harvesters. To convert mechanical energy into electrical energy, devices must be mechanically flexible and stretchable to implant or attach to the highly deformable tissues of the body. A systematic analysis of piezoelectric nanogenerators (PENGs) for personalized healthcare is provided in this article. This article briefly overviews PENGs as self-powered sensor devices for energy harvesting, sensing, physiological motion, and healthcare.

• Architectural research
• /
• v.19 no.2
• /
• pp.27-33
• /
• 2017

Advances in information and mobile technologies have changed the traditional firm ways of working very flexible, collaborative and innovative, resulting in the changes in work place structures and layouts. Despite the growing body of literature examining the novel ways of working, which is called smart work, there is little academic attentions paid to the spatial aspects of new work places, namely smart offices and smart work centers. This research explores the spatial changes of work places that improve business efficiency and collaboration among workers suitable for the novel ways of working. Conducting in-depth field surveys on selected cases, we analyzed the changes in spatial structure and operation policies of smart offices and smart work centers. From this survey, we observed that the new work places under study take various novel spatial forms and they have flexible operating policies such as flexible seating and flexible work hours. We also found that it would be difficult to change existing business practices and typical ways of performing tasks, without changing the bureaucratic spatial designs and layouts. Future studies are suggested to examine how spatial structures and layouts of offices have impacts on space utilization, collaboration, creativity, and job satisfaction.

• The Korean Journal of Pain
• /
• v.10 no.2
• /
• pp.270-273
• /
• 1997

Caudal epiduroscopy has been introduced as an alternative technique for direct injection of epidural steroid and lysis of adhesion. Futher, it gives a better understanding of the role of epidural adhesion in recurrence of sciatica and low back disorder after surgery. We experienced a clinical application of flexible fiberoptic epiduroscope inserted through the sacral canal. A 37-year-old woman was suffering from right lumbar radiculopathy after an operation for a herniated disc. A series of volumetric caudal steroid injections and physical therapy had little effect on her symptoms. Patient was thought to be a good candidate for epiduroscopy. Flexible flberoptic epiduroscopy was as follows: 60 ml of normal saline irrigation and epidurogram, 40 mg of triamcinolone in 10m1 of normal saline was directed around right L5 nerve root. The following morning, patient reported reduced pain in her leg.