• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.1
• /
• pp.11-15
• /
• 2016

The organic light emitting diodes (OLEDs) have been studied as large flexible displays, light source and hard wares of internet of things. However, OLEDs show some drawbacks in terms of external environments due to the low work function of the metals and the reactive organic materials. In particular, the operation functions of the OLEDs tend to deteriorate rapidly by exposing the oxygen and moisture. So as to prevent it, domestic and overseas studies underway in various method such as ALD, PVD, CVD. But it has complex process and high cost. Therefore In order to protect devices from the external environments, it is important to develop the passivation thin films of low-cost and simple process which can prevent the devices from the penetration of the oxygen and moistures. In this study, to improve the reliability, passivation thin films were coated onto the green OLEDs by spin coating method and investigated the changes of the optical properties of the prepared devices at various doping concentrations of sodium alginate (SA). The passivation solutions were synthesized by using polyvinyl alcohol (PVA) host material with a dopant of SA which were added with the amounts of 10, 20 and 40 wt% into the PVA. As a result, the best barrier properties of the OLEDs were obtained for the samples with 40 wt% SA. Finally, the passivation films can be optimized by using the mixture solution of PVA and SA materials.

• Journal of Biomedical Engineering Research
• /
• v.22 no.5
• /
• pp.403-412
• /
• 2001

The Present study analyzed the pressure-flow characteristics of a Korean shunt valve. Changes in the characteristic currie depending on the design parameters were also investigated. The Korean shunt valve used in the present study was constant pressure type and our analyses were validated through experiments. We applied fluid-structure interaction to solve the flow dynamic Problem because the small diaphragm in the valve was made from flexible silicone elastomers. Considering the material nonlinearity of the hyper-elastic material. the Mooney-Rivlin approximation was employed. The results of the numerical analyses were close to the experimental results The major Pressure drop was observed to happen in the small diaphragm. The slope of the pressure-flow characteristic curve was computed to be 0.37mm$H_2O$.hr/cc, which was similar to the average value of commercial shunt valves. 0.40mm$H_2O$.hr/cc. Therefore. our valves analyzed in the Present study showed a Proper Pressure control characteristics of the constant pressure type shunt valves. The opening pressure could be controlled by adjusting the amount of predeflection of the valve diaphragm. In order to obtain opening pressures of 25mm$H_2O$ and 80mm$H_2O$, respectively, and the required predeflection was found to be 10.2$\mu$m and 35.3$\mu$m. The flow orifice size was found to be within 10$\mu$m during valve operation Therefore, Precision design and manufacturing techniques are necessary for successful operations of the shunt valve. The study indicated the amount of predeflection as well as the magnitude of corner rounding of the diaphragm edge are important design parameters to influence the slope of the pressure-flow characteristic curve.

• Journal of Intelligence and Information Systems
• /
• v.11 no.3
• /
• pp.25-43
• /
• 2005

In modern automated container terminals, automated guided vehicle (AGV) systems are considered a viable option for the horizontal tansportation of containers between the stacking yard and the quayside cranes. AGVs in a container terminal move rather freely and do not follow fixed guide paths. For an efficient operation of such AGVs, however, a sophisticated traffic management system is required. Although the flexible routing scheme allows us to find the shortest possible routes for each of the AGVs, it may incur many coincidental encounters and path intersections of the AGVs, leading to collisions or deadlocks. However, the computational cost of perfect prediction and avoidance of deadlocks is prohibitively expensive for a real time application. In this paper, we propose a traffic control method that predicts and avoids some simple, but at the same time the most frequently occurring, cases of deadlocks between two AGVs. More complicated deadlock situations are not predicted ahead of time but detected and resolved after they occur. Our method is computationally cheap and readily applicable to real time applications. The efficiency and effectiveness of our proposed methods have been validated by simulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.6
• /
• pp.2021-2029
• /
• 2010

This paper suggested the method to design and analyze FMC robot's dispatching rule using the Simulation and Sequential Patterns. To do this, first of all, we built FMC using simulation and then, extracted signals that facilities call a robot, saved it as the log type. Secondly, we built robot's optimal path using the Sequential Pattern Mining with the results of analyzing the log and relationship between machine and robot actions. Lastly, we adapted it to the A corp.'s manufacturing line for verifying its performance. As a result of applying the new dispatching rule in FMC, total throughput and total flow time decrease because of decreasing material loss time and increasing robot utility. Furthermore, because this method can be applied for every manufacturing plant using simulation, it can contribute to advance total FMC efficiency as well.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.5
• /
• pp.83-91
• /
• 2018

Purpose - The purpose of this study is to explore the introduction and activation of smart training for the effective training of vocational ability development of companies in the 4th industrial revolution era, we analyze the present status of smart training introduction and related difficulties and propose concrete activation plan. Research design, data, and methodology - Through the online survey, we tried to confirm the recognition of corporate about smart training. Questionnaires include what are the benefits, expectations, and difficulties of smart training, etc. The survey was conducted from August 21, 2017 to September 4, 2017. A total of 69 companies participated in the questionnaire. The questionnaire results were analyzed through frequency analysis and contents analysis. Based on the results of the questionnaire, we found out the cause of inhibition of smart training activation and suggested activation strategies. Results - The main reason for the provision of smart training is the expectation of the training performance and the recognition that it is possible to provide training in a flexible manner. The effectiveness of smart training operation was evaluated as a high level of contribution to the development of creative training course and the capacity of training institute. As a result of checking factors that hinders the activation of smart training, the most important reason is that the time and cost burden of the training institutes is excessive. The lack of expertise in the design of smart training courses and the burden of employers and trainees. Conclusions - In order to activate smart training, it is necessary to find solutions to the obstacles at the internal or external level of training institutions. The internal barriers to the training organization are lack of internal competence for preparation and course management. In this regard, we need to consider providing consulting, best practices or guidance in the process of designing and operating smart training. On the other hand, as an external obstacle factor, it is necessary to provide incentives to participate in smart training. In addition, further research is needed on strategies that can lead to participation in smart training from the viewpoint of employers and learners.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.9
• /
• pp.385-396
• /
• 2017

Many IoT platforms have been proposed for various IoT devices, from low-end to high-end performance. We previously proposed a new IoT platform called MinT that supports the operation of the sensing devices and network communication. In the proposed platform, the things can flexibly connect to each other and efficiently share their information. Most IoT platforms, including the MinT, support thread pooling to quickly process requests. However, using a thread pool with a fixed thread count can cause network delay and inefficient energy consumption. In this paper, we propose an enhanced method to manage the thread pool efficiently by adjusting the number of threads every cycle to regulate the device's performance. In particular, we aim to improve the performance of the Interaction Thread Pool Group, which is responsible for analyzing, processing, and re-transmitting the received packets. The experiment shows that the improved method increases the average throughput by approximately 25% compared to the existing platforms. Finally, using the proposed method, the MinT can reduce the transmission delay and energy consumption of devices in the IoT environment.

• Archives of Craniofacial Surgery
• /
• v.17 no.3
• /
• pp.135-139
• /
• 2016

Background: The ultimate goal of craniofacial reconstructive surgery is to achieve the most complete restoration of facial functions. A bioabsorbable fixation system which does not need secondary operation for implant removal has been developed in the last decade. The purpose of this study is to share the experience of authors and to demonstrate the efficacy of bioabsorbable mesh in a variety of craniofacial trauma operations. Methods: Between October 2008 and February 2015, bioabsorbable meshes were used to reconstruct various types of craniofacial bone fractures in 611 patients. Any displaced bone fragments were detached from the fracture site and fixed to the mesh. The resulting bone-mesh complex was designed and molded into an appropriate shape by the immersion in warm saline. The mesh was molded once again under simultaneous warm saline irrigation and suction. Results: In all patients, contour deformities were restored completely, and bone segments were fixed properly. The authors found that the bioabsorbable mesh provided rigid fixation without any evidence of integrity loss on postoperative computed tomography scans. Conclusion: Because bioabsorbable meshes are more flexible than bioabsorbable plates, they can be molded and could easily reconstruct the facial bone in three dimensions. Additionally, it is easy to attach bone fragments to the mesh. Bioabsorbable mesh and screws is effective and can be easily applied for fixation in various craniofacial trauma reconstructive scenarios.

• Journal of The Korean Association of Information Education
• /
• v.11 no.3
• /
• pp.339-347
• /
• 2007

Along with developments of information and communication technologies, internet has spread not only all over the society, but also our everyday life deeply. Recently, requirements for e-learning using internet in the educational aspect have a great influence on the changes of school educations. Cyber Home Learning System, in particular, has been implemented throughout the nation for the purpose of reducing private expenditure for education and promoting substantial improvements in quality of public education. However, there have been exposed many problems with respect to quality of operations and managements of the system comparing to its quantitative growth, and so, at this point in time, researcher conducted analysis of actuality of perceptions of both elementary and middle school teachers with a focus on the case of S System in K province. To test this, total 278 participants were sampled from the elementary schools (139 teachers) and the middle schools (139 teachers) located in K province and were asked to complete a survey and the results therefrom were analyzed accordingly. Results from the analyses revealed that elementary school teachers responded more positively than other respondents in the most areas, including supply of a variety of learning contents of S System, quality of contents, and providing for helps insomuch as to complement school works, etcetera. In addition, researcher has found out that, to make the system become all the more efficient, it shall be required to establish a strategy in order to induce students' interest in the system, as well as to construct infrastructure for facilitating the use of computer. And that there are also needs for continuous supports from both the school and the education authority concerned, and for method of flexible operation of curriculum.

• Journal of the Korea Convergence Society
• /
• v.11 no.7
• /
• pp.281-287
• /
• 2020

The purpose of this study is to examine whether the effect of service satisfaction regarding the accessibility of child care services varies between dual-earner and single-earner families. In particular, we conducted the analysis by dividing the service accessibility into sub-areas. The study sample consisted of 267 parents living in Seoul and Gyeonggi region. As a result of the analysis, accommodation in use time and affordability influenced satisfaction in the single-earner families, and information acquisition and acceptability in the dual-earner families. For single-earner families, the more convenient the use time of the childcare institution and the less the service cost burden, the higher the satisfaction. The dual-earner families had higher satisfaction levels if it was easier to obtain information about the childcare centers and weaker the religious characteristics of the childcare centers. Based on the research results, it is necessary to differentiate the burden of cost and provide more flexible operation of childcare service operating hours. In addition, it is necessary to devise a policy method to increase the transparency of information to childcare institutions.

• Journal of IKEEE
• /
• v.17 no.4
• /
• pp.407-417
• /
• 2013

In this paper, a reconfigurable peripheral unit for LED lighting communication is presented. Embedded lighting devices require various communication protocols. Usually, serial communication protocols and lighting control communication protocols such as DALI, DMX512, UART, SPI, IrDA, etc. are used in lighting devices. When the requirements of communication protocols are satisfied with separate IPs, the cost and the power consumption can considerably increase. We propose a reconfigurable communication peripheral unit which uses analysis of signal formats of the protocols. The gate count of the reconfigurable peripheral unit uses only 57% of the gate count of the separate implementation. Also, in this paper, a mapping table based DALI-ZigBee interfacing method for flexible lighting network configurations is proposed. Using this method, various DALI-ZigBee network systems can be easily set up. An LED lighting system platform is implemented to verify the operation of the DALI-ZigBee interfacing method. The reconfigurable peripheral unit and the DALI-ZigBee interfacing method can be efficiently used to implement various wired/wireless lighting communication systems.