• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 특별세미나 특별세션
• /
• pp.229-238
• /
• 2006

In general, the Maglev vehicle is run over an elevated guideway consisting of steel or concrete structure. Since the running behavior of the vehicle is affected by the flexibility of the guideway, the consideration of the flexibility of guideway is needed for evaluating the dynamics of both the vehicle and guideway. A new method based on flexible multibody dynamics is proposed to model the Maglew vehicle. This method combines the levitation controller, vehicle, and guideway into a coupled model To verify the method, an urban transit is analyzed using the method and discussions are carried out.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.1059-1061
• /
• 2002

A FE model is to develop a personalized biomechanical model of the scoliotic spine that will allow the design of clinical test providing optimal estimation of the post-operation results. A flexible multi-body model of the spine including rib cage, clavicle, and scapular was developed to simulate several mobility simulations. Vertebrae, clavicle and scapular were represented using rigid bodies and ribs and sternum were modeled as flexible bodies. Kinematical Joints and spring elements were used to represent the intervertebral disc and ligaments respectively. Postero-anterior and lateral radiographics of a scoliotic spine were used to represent a 3D reconstruction. CT data for same patient were also used to verify vertebrae rotation driven from postero-anterior and lateral radiographic images. Simulated results showed good reducibility almost uniformly distributed along the spinal segments. It was also found that boundary and loading conditions, required to mimic the operation procedures, were proven to be very sensitive parameters to its results rather than its mechanical properties

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.163-167
• /
• 2003

A novel method for 3-dimensional dynamic analysis of marine slender structure gas been developed by using Euler parameters. The Euler parameter rotation, which is being widely used in aerospace vehicle dynamics and multi-body dynamics, has been applied to elastic structure analysis. Large deformation of flexible slender structures is described by means of Euler parameters. Euler parameter method is implemented effectively in incremental-iterative algorithm for 3D dynamic analysis. The normalization constraint of Euler parameters is efficiently satisfied by means of a sequential updating method.

• 대한기계학회논문집A
• /
• 제39권10호
• /
• pp.1039-1044
• /
• 2015

차량의 개발단계에서 내구성 평가는 많은 시간과 비용이 소요된다. 최근 완성차 업체들은 자사만의 내구성 평가방법을 개발하고 수정 보완하는데 많은 노력을 기울이고 있다. 본 연구는 토션빔 액슬의 내구성 평가를 위한 통합 CAE 기법을 개발함에 있어 세계적인 자동차 업체의 정형화된 CAE 기법과의 비교를 통해 경제성을 평가하고 실험적 방법을 통해 얻은 데이터와의 비교를 통해 신뢰성을 확보하는 것을 목표로 하였다. 이를 위해 현재까지 널리 사용되어 온 준정적 내구해석의 과정 및 결과에서 보완점과 문제점을 분석하였고, 업계의 요구사항을 면밀히 검토하여 정규모드해석을 통해 다물체 동역학 모델을 구성하고 이를 이용한 동역학 해석을 진행한 후 그 결과를 이용하여 내구해석인 공진 내구해석 기법을 제안하였다.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제3권2호
• /
• pp.117-124
• /
• 2015

최근 생활수준의 향상으로 인해 가정용 에어컨의 보급률이 꾸준히 증가함에 따라 품질에 대한 소비자의 눈높이 또한 점점 높아지고 있다. 과거에 소비자의 요구는 제품의 효율성에 집중되었지만 점차 저진동/저소음에 대한 부분으로 확장되고 있다. 에어컨의 압축기는 제품의 효율을 결정하는 주요한 부분이면서 동시에 진동/소음의 주된 원인을 제공하고 있다. 압축기에서 발생한 진동/소음은 압축기 케이스와 배관을 통해 주위 구조물로 전달되고 이들은 다시 구조기인 소음이나 2 차적인 진동을 유발하게 된다. 본 연구에서는 RecurDyn 을 이용해 압축기의 진동/소음에 영향을 미치는 모터의 가진력이 고려된 MFBD(Multi Flexible Body Dynamics) 해석 모델을 개발하였다. 개발된 모델을 이용하여 압축기의 진동/소음 특성을 조사하고 압축기에서 발생하는 진동을 계산하여 실험 결과와 비교하였다.

• 한국전산구조공학회논문집
• /
• 제27권5호
• /
• pp.379-384
• /
• 2014

본 논문은 갠트리 크레인의 설계를 위해 컨테이너 하역작업 시 특정하중 조건하의 RTGC(Rubber Tired Gantry Crane)의 동적거동과 그에 따른 윤하중을 분석한 내용을 기술하고 있다. 먼저 RTGC의 동적거동을 살펴보기 위해 거대 구조물인 크레인의 유한요소 모델을 개발하고 고유진동수와 고유모드의 모달시험결과를 이용하여 유한요소모델을 검증하였다. RTGC의 기타 부속품은 3차원 CAD모델링을 통해 다물체 동역학해석 소프트웨어인 ADAMS에서 강체로 모델링하였다. 본 연구에서 하중 조건은 일반적인 컨테이너의 이송조건(OP1)과 외부부하조건 없이 단순히 트롤리를 이용하여 컨테이너를 하역하는 2가지 경우로 고려하였다. 해석 결과 RTGC의 컨테이너 작업 시 발생하는 크레인의 진동은 거대 구조물의 강성과 변형에 주로 기인함을 확인하였으며 이러한 크레인의 진동은 RTGC의 움직임을 발생시켜 컨테이너 하역작업 불능 등의 거동을 발생시킬 수 있음을 분석할 수 있었다.

• 패션비즈니스
• /
• 제19권4호
• /
• pp.92-108
• /
• 2015

This study aimed at developing a down jacket prototype that utilized sunlight as an alternative energy source with no air pollution. The jacket is filled with flexible solar panels and has a heat-generating function and LED function. In this study, three smart down jacket prototypes were developed, and the jacket's capabilities were demonstrated through the thermal effect on the performance test. The typical output voltage of the flexible solar panels was 6.4V. By connecting the 2 solar cell modules in series, the final output voltage was 12.8V. A battery charge regulator module was used the KA 7809 (TO-220) of 9V. Three heating pads were to be inserted into the belly of the jacket as direct thermal heating elements, and the LED module was configured, separated by a flash and an indicator. The smart down jacket was designed to prevent damage to the down pack without the individual devices' interfering with the human body's motion. Because this study provides insulation from extreme cold with a purpose, the jacket was tested for heat insulation properties of non-heating, heating on the back, heating on the abdomen, and heating on both the back and abdomen in a sitting posture in a static state. Thermal property analysis results from examining the average skin temperature, core temperature, and the temperature and humidity within clothing showed, that placing a heating element in one place was more effective than distributing the heating elements in different locations. Heating on the back was the most effective for maintaining optimal skin temperature, core temperature, and humidity, whereas heating on the abdomen was not effective for maintaining optimal skin temperature, core temperature, or humidity within clothing because of the gap between the jacket and the body.

• 한국기계가공학회지
• /
• 제13권2호
• /
• pp.8-14
• /
• 2014

Many kinds of robots and machines have been developed to replace human laborin industrial and medical fields, as well as domestic life. In these applications, the device sneed to obtain environmental data using diverse sensors. Among such sensors, the tactile sensor is important because of its ability to get information regarding surface texture and force through the use of mechanical contact. In this research, a simple tactile sensor was developed using the direct writing of pressure sensitive material and layered fabrication of photocurable material. The body of the sensor was fabricated using layered fabrication, and pressure sensitive materials were dispensed between the layers using direct writing. We examined the line fabrication characteristics of the pressure sensitive material according to nozzle dispensing conditions. A simple $4{\times}4$ array flexible tactile sensor was successfully fabricated using the proposed process.

• 항공우주시스템공학회지
• /
• 제12권1호
• /
• pp.17-26
• /
• 2018

다물체 동역학 기법을 이용하여 가변속 제어모멘트자이로와 인공위성의 상호작용하는 모델을 개발한 연구결과를 소개한다. 이 상호작용 모델을 이용하여, VCMG 모터의 사양 설계와 위성 구조물의 강도설계에 활용할 수 있는 데이터를 얻었다. 그리고 태양 전지판과 같은 유연 모듈의 상호작용 효과도 포함하였다. 위성의 기동에 의하여 유연 모드가 야기되고, 이 모드의 진동에 의하여 위성 자세에 변동이 가해진다. 모델리카 언어로 시뮬레이션 프로그램을 개발하고, 제시한 모델의 타당성을 검증하였다.

• Design & Manufacturing
• /
• 제14권4호
• /
• pp.65-70
• /
• 2020

Partial reinforcement of sheet metal parts with CFRP patch is a technology that can realize ultra-lightweight body parts while overcoming the high material cost of carbon fiber. Performing these patchworks with highly productive press equipment solves another issue of CFRP: high process costs. The A-pillar is the main body part and has an undercut shape for fastening with other parts such as roof panels and doors. Therefore, it is difficult to bond CFRP patches to the A-pillar with a general press forming tool. In this paper, a flexible system that applies uniform pressure to complex shapes using ceramic particles and silicone rubber is proposed. By benchmarking various A-pillars, a reference model with an undercut shape was designed, and the system was configured to realize a uniform pressure distribution in the model. The ceramic spherical particles failed to realize the uniform distribution of high pressure due to their high hardness and point contact characteristics, which caused damage to the CFRP patch. Compression equipment made of silicone rubber was able to achieve the required pressure level for curing the epoxy. Non-adhesion defects between the metal and the CFRP patch were confirmed in the area where the bending deformation occurred. This defect could be eliminated by optimizing the process conditions suitable for the newly developed flexible system.