• 복식
• /
• 제57권3호
• /
• pp.53-62
• /
• 2007

The purpose of this study was to investigate mechanical and comfort performances of the material for the improved working uniform for a volunteer fire brigade member, to get basic data for its evaluation and to help its material and design development. The results were as follows; The material of the newly developed working uniform was thinner and lighter than the material of the current used working uniform. It had better breathability, air permeability and heat transmission rate than the current one. It also had superior anti-flammability In all mechanical properties(tensile, bending, shearing, compression and surface properties), it showed better performances than the current one. It elongated and bended easier and more in both warp and weft directions. The elastic recovery and shape stability after elongation were also higher. The recovery and resistance to shearing and the resiliency and recovery after compression were also better than the current one. It was more flexible, softer and smoother in primary hand value, and was more suitable for the material for winter suit which needs softness and fullness in total hand value. The material of the improved working uniform showed lower thermal insulation value and higher evaporative resistance value compared to the material of the currently used working uniform from the sweating thermal manikin test. It was shown that the physical performances and the hand value of the textile material used in the newly developed working uniform for a volunteer fiber brigade member was improved compared to the one used in the currently used working uniform.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권2호
• /
• pp.40-51
• /
• 2015

콘크리트 구조물에서는 인장응력에 대한 저항과 콘크리트내의 하중전달을 위한 철근이음이 고려되어야 한다. 현재 사용되고 있는 철근의 이음방법으로는 전통적으로 사용되는 겹침이음과 함께 채움금속이음을 갖는 슬리브이음과 전조 평행나사 이음과 같은 기계적 철근연결방법 등이 사용되고 있다. 본 연구는 기존에 사용되고 있는 기계적 철근 이음의 시공성과 구조적 성능을 개선하기 위하여 전조 변단면 철근이음을 제안하고 이를 적용한 철근의 구조성능과 파괴거동을 평가하기 위하여 철근연결 종류 및 체결 특성을 고려한 인장강도 실험과 휨하중 실험을 실시하였다. 이를 통하여 제안된 전조 변단면 이음을 적용한 철근의 인장강도 및 휨성능을 비교 평가하였다. 본 연구결과 전조변단면 이음을 적용한 철근이 이음이 없는 철근과 비교하여 동일한 구조성능을 가지는 것으로 나타나 철근콘크리트 구조물의 철근 이음을 위하여 사용할 수 있을 것이다.

• 한국전산구조공학회논문집
• /
• 제24권5호
• /
• pp.513-520
• /
• 2011

본 연구에서는 스트라치 시스템의 긴장설치과정 해석을 수행하기 위한 개선된 명시적 해석법을 제안하였다. 스트라치 시스템은 Stressed-Arch에서 유래한 용어로 슬리브에 의한 갭이 도입된 유동 하현재가 내부의 긴장재에 의한 초기장력의 도입으로 서서히 닫히게 되고, 이에 따라 전체 구조물이 상승하여 최종적인 아치형태의 구조물을 형성하는 독창적인 구조시스템이다. 스트라치 시스템의 초기장력 도입과정을 긴장설치(stress-erection process) 과정이라 하며, 초기곡률의 도입에 따라 유동 상현재에는 과도한 초기변형이 발생하여 소성거동에 의한 강체회전이 발생하는 불안정 구조물이 된다. 본 연구에서는 이러한 스트라치 시스템의 불안정 거동특성을 해석하기 위해서 소성힌지가 적용된 보-기둥요소를 사용하여 유동상현재를 모델링하였고, 불안정 구조물의 해석법에 효과적으로 사용되는 동적이완법의 개선된 알고리즘을 개선하여, 실제 스트라치 구조물의 긴장설치과정 해석을 수행하였으며, 실제 프로젝트에 대한 해석결과의 분석을 통하여 제안된 해석법의 적용성을 검증하였다.

• 한국강구조학회 논문집
• /
• 제11권4호통권41호
• /
• pp.425-433
• /
• 1999

일반적으로 철골조의 구조해석과 설계시 접합부는 완전한 강절점과 활절점으로 가정되나 실제의 접합부는 반강접의 거동을 보인다. 본 논문에서 접합부의 연성도를 고려한 비선형 거동과 부재의 기하 비선형을 고려할 수 있는 구조해석 프로그램을 개발하였다. 6층 비가새 철골구조물에 대한 효율적인 반강접 접합부를 제안하였으며 반강접 접합부의 구조물 거동에 미치는 영향을 파악하였다.

• 국제초고층학회논문집
• /
• 제3권3호
• /
• pp.191-198
• /
• 2014

The tall building and super tall building has been a common building type in China, with multiple functions and complex geometry. Composite construction is broadly used in tall building structures and constitutes the mixed structure together with concrete and steel constructions. The mixture of the constructions is purposely designed for specific area based on the analysis results to achieve the best cost-effectiveness. New types of composite construction are conceived of by engineers for columns and walls. Material distribution is more flexible and innovative in the structural level and member level. However the reliability of computer model analysis should be verified carefully. Further researches in the design and build of composite construction are necessary to ensure the success of its application. Composite or Mixture Index is suggested to be used as a performance benchmark.

• International Journal of Control, Automation, and Systems
• /
• 제1권2호
• /
• pp.252-256
• /
• 2003

A biped robot should be designed to be an effective mechanical structure and have smaller hardware system if it is to be a stand-alone structure. This paper shows the design methodology of a biped robot controller using FPGA(Field Programmable Gate Array). A hardware system consists of DSP(Digital Signal Processor) as the main CPU, and FPGA as the motor controller. By using FPGA, more flexible hardware system has been achieved, and more compact and simple controller has been designed.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2004년도 춘계 학술발표회 논문집 제1권1호(통권1호)
• /
• pp.123-130
• /
• 2004

The recent large-spatial structures are frequently made from light-weight structural system and it has a good mechanical efficiency and uses new materials. The large space is made by light-weight structural system using tension members mainly, and generally it is called a soft structure. The cable dome structures which are a soft structures are very flexible, the stresses and nodal coordinates of other members are changed when we control the stress of one member. Therefore, we have to do two kind of works for effective and accurate construction of the cable dome structures. The first work is making a working scenario to complete the final objective form and the second is revising constructional errors occurred in process of the actual works. These works are called constructional analysis. At this time, we have to consider geometric nonlinearity to reflect the sensitivity by the initial stresses of cable dome structures, and constructional analysis comes down to a nonlinear problem after all. In this study, we try to approach the constructional analysis of the cable dome structures using the numerical method, and then verify it.

• 아태비즈니스연구
• /
• 제7권2호
• /
• pp.61-76
• /
• 2016

This study aims to establish ways of how languages are used as determination factors for investment decisions among Asian countries where used languages are diversified. According to the analysis result, language segmentation of the investing country increases investment whereas the language segmentation of the invested countries is analyzed as the decreasing factor of investment. Also, it is analyzed that the further the linguistic distance between the investing country and the invested country the more investment increases. In the aspects of approached language distance and investment time selection, along with the increased linguistic distance, the elasticity to foreign direct investment is apprehended to be more flexible than other forms of investment. Such result shows the more segmented the languages of the targeted invested country the more investment cost will increase and therefore the results in linguistic distance can be explained as diversification of the invested country and the result to the forming of bridgehead at the invested area.

• 경영과학
• /
• 제11권1호
• /
• pp.73-90
• /
• 1994

Recently the recongnition of Logistics becomes important to enterpries as a means for improving their competition, but the Korea enterpries falls for far behind in management techniques for analyzing realities and problems in the Logistics compare to the advanced countries. Especially the function of inventory control which is most undeveloped in them should be improved in Korea. Inventory is very important in Logistics, but there exists trade-off between inventory level and customer in the service level. It is difficult to coordinate both the reduction in the inventory level and the enhancement in the service level. Its effective technique is a DRP system. In general, it deals with arborescent distribution network in which a given channel member has a single source of supply. This article aims to present a DRP system, and more a DRP system which is flexible and responsive in the multisourcing, multi-echelon distribution network. Related research issues are discussed. Finally, using a DRP system on logistics and the management performance. So we can help the physical distribution improvement of the Korean enterprises.

• Journal of Information Technology Applications and Management
• /
• 제20권4호
• /
• pp.151-164
• /
• 2013

According to the development of smart technologies such as smart phones, tablet PC, and SNS communication, the necessity of smart work that can change the working environments in organizations has been emphasized. However, while there are many organizations that wish to adopt smart technologies, there are those that have been skeptical until now about its potential success. Leaders may especially have different viewpoints concerning the efficacy and effectiveness of smart work depending on the industries, characteristics of the work, etc. Therefore, this research looks to investigate whether there may be differences between leaders (manager, project manager, supervisor, etc.) and non-leaders (team member, staff, etc.) group in accepting smart working through empirical and exploratory approaches.