• International Journal of Aeronautical and Space Sciences
• /
• 제15권2호
• /
• pp.113-122
• /
• 2014

The objective of the paper is to clarify a methodology based on the use of the existing component mode synthesis methods for the case of two damped substructures which are coupled through a linking viscoelastic flexible substructure and for which the structural modes with free geometrical interface are used for each main substructure. The proposed methodology corresponds to a convenient alternative to the direct use either of the Craig-Bampton method applied to the three substructures (using the fixed geometric interface modes) or of the flexibility residual approaches initiated by MacNeal (using the free geometric interface modes). In opposite to a geometrical interface which is a topological interface on which there is a direct linkage between the degrees of freedom of substructures, we consider a physical flexible interface which exists in certain present technologies and for which the general framework linear viscoelasticity is used and yields a frequency-dependent damping and stiffness matrices of the physical flexible interface.

• 디자인융복합연구
• /
• 제15권2호
• /
• pp.301-317
• /
• 2016

새롭게 등장하는 플렉서블 디스플레이 인터페이스에서는 곡면표현이 가능하고 구부리거나 말거나 접는 등 디스플레이의 변형이 일어나는 특성을 바탕으로 새로운 사용행태를 야기할 수 있다는 점에서, 기존의 딱딱한 평면 디스플레이가 제공하지 못했던 새로운 경험을 줄 수 있을 것으로 논의되고 있다. 그러나 현재 플렉서블 디스플레이 분야에서 사용자경험의 총체적인 속성을 밝히는 연구를 찾기 어려움에 따라, 본 연구에서는 플렉서블 디스플레이 인터페이스에서 사용자가 기대하는 경험이 무엇인지 밝히고자 하였다. 이를 위해, 먼저 기존의 디지털 미디어 인터페이스에서의 사용자경험에 대한 문헌과 플렉서블 디스플레이 인터페이스에서의 사용자경험에 대한 문헌을 조사하고, 현재 사용자의 인식을 반영하기 위한 인터뷰를 진행하여 사용자경험을 나타내는 52개 항목을 수집하였다. 이 항목들은 사용자 기대경험 차원 도출을 위한 측정 문항으로 사용되었으며, 308명을 대상으로 설문조사를 진행하였다. 조사 결과, 플렉서블 디스플레이 인터페이스에서 기대되는 사용자경험은 기능성, 이해성, 유희성, 편의성, 친숙성, 자극성, 적응성, 공동성, 실제성, 심미성의 10가지 차원으로 나타났다.

• 디지털융복합연구
• /
• 제16권1호
• /
• pp.287-292
• /
• 2018

ICT(Information and Communications Technologies)기술이 중심이 되는 디지털 멀티미디어 환경은 우리의 상상을 현실의 다양한 경험으로 바꾸어주었다. 고도의 정보화 사회에서 요구되는 인간과 기계의 커뮤니케이션 수단으로 탄생한 플렉시블 디스플레이(Flexible display)는 시장을 다변화시키고, 사물인터넷등과의 연계를 통해 새로운 시장을 창출해 내고 있다. 플렉시블 디스플레이의 인터페이스는 입력 또는 출력의 결과로 물리적 형태를 제공할 수 있기 때문에 사용자 중심의 인터페이스 디자인이 무엇보다 중요하다. 이에 본 논문의 연구자는 플렉시블 디스플레이의 사용자 조작에 따른 물리적 변형과 특성에 대해 문헌과 사례조사를 통해 연구했다. 연구 결과 사용자 경험을 위한 플렉시블 디스플레이 인터페이스 디자인 가이드라인을 다음과 같이 제시한다. 첫째, 다양한 형태의 디스플레이 환경에서 사용자에게 필요한 기능을 최대한 제공할 수 있도록 디자인되어야 한다. 둘째, 인터페이스를 활용함에 있어서 다중 사용자의 시야각에 방해 요소는 제거되어야 한다. 셋째 터치와 접촉 이외에 플렉시블 디스플레이에서 가능한 사용자의 모든 조작행위가 고려되어야 한다. 넷째 플렉시블 디스플레이의 가변적 상황에 따라 사용자 경험을 위한 인터페이스디자인도 달라져야 한다. 위 가이드라인은 향후 다양한 플렉시블 디스플레이가 출시된 후, 실증적인 사용자 경험에 대한 분석과 연구에 도움이 될 것으로 기대된다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.109-112
• /
• 2007

To determine design or remaining life of flexible pavement, tensile strain at the bottom of asphalt concrete course and vertical strain on top of subgrade should be estimated. Various computer programs can be used for determining the strain at the critical position in pavement. However, these are conducted under the assumptions of full bonded or unbound state of layer interface conditions. This study compares the output of finite element analysis and multi-layer elastic analysis as vertical load was applied to the surface of flexible pavement. It is noted that the pavement performance is significantly affected depending upon the interface conditions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.223-227
• /
• 2003

A new flexible electronic packaging technology and its medical applications are presented. Conventional silicon chips and electronic modules can be considered as "mechanically rigid box." which does not bend due to external forces. This mechanically rigid characteristic prohibits its applications to wearable systems or bio-implantable devices. Using current MEMS (Microelectromechanical Systems) technology. a surface micromachined flexible polysilicon sensor array and flexible electrode array fer neural interface were fabricated. A chemical thinning technique has been developed to realize flexible silicon chip. To combine these techniques will result in a realization of truly flexible sensing modules. which are suitable for many medical applications.

• 한국재료학회지
• /
• 제30권3호
• /
• pp.105-110
• /
• 2020

Cu/PET composite films are widely used in a variety of wearable electronics. Lifetime of the electronics is determined by adhesion between the Cu film and the PET substrate. The formation of an anisotropic nanostructure on the PET surface by surface modification can enhance Cu/PET interfacial adhesion. The shape and size of the anisotropic nanostructures of the PET surface can be controlled by varying the surface modification conditions. In this work, the effect of Cu/PET interface nanostructures on the failure mechanism of a Cu/PET flexible composite film is studied. From observation of the morphologies of the anisotropic nanostructures on plasma-treated PET surfaces, and cross-sections and surfaces of the fractured specimens, the Cu/PET interface area and nanostructure width are analyzed and the failure mechanism of the Cu/PET film is investigated. It is found that the failure mechanism of the Cu/PET flexible composite film depends on the shape and size of the plasmatreated PET surface nanostructures. Cu/PET interface nanostructures with maximal peel strength exhibit multiple craze-crack propagation behavior, while smaller or larger interface nanostructures exhibit single-path craze-crack propagation behavior.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1491-1494
• /
• 2008

Typically internal mobile LCD display modules are connected to the mobile product baseband PCB with flexible printed circuit board equipped with board-to-board connector. This solution has a drawback of limiting the product concept work to certain solutions that are based on connector size, location, flexible PCB length, bending, etc. in the display module. Also flexible printed circuit board based solutions are not completely optimized from reliability point of view, causing flex circuit board breakings. For the external displays in the PC or Home entertainment market, the cable solution is too expensive and resource demanding. The wireless solution has obvious advantages over reliability, low cost and flexibility. This paper describes a wireless audio-visual interface solution.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.68-72
• /
• 2004

A practical method to investigate the user interface of web based Flexible Manufacturing System(FMS) on the internet environment is established. Because the industrial FMS controller requires a lot of gadget, such as switch, dial, button, etc., for actual work-site flexible operation sufficiently, the user interface of the controller is significantly complex. The support for operational convenience of FMS controller can increase productivity and efficiency of the user, operational personnel of FMS. While most FMS provide their application programming interface(API) and graphical user interface(GUI) with adequate mechanism itself when used in stand alone, there is increasing demand for FMS that can operate with the intuitional user interface find virtual reality(V/R) environment. This thesis considers the intuitional user interface of Web-based FMS first, and from this, goes a step further, improves as virtual reality environment of FMS on the internet environments by using the feature based modeling technique approach and cartoon rendering. The feature-based modeling technique approach is applied to FMS line which is consist of facilities such as machining center, CNC lathe, autonomous guided vehicle, rail guided vehicle, and various controllers. In this study, the FMS established the intuitional user interface is able to obtain not only the operational convenience but also the enough productivity and significant efficiency.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1999년도 KOBA 방송기술 워크샵 KOBA Broadcasting Technology Workshop
• /
• pp.23.1-28
• /
• 1999

InterSpaceTM is an advanced networked virtual reality system that presents shared three-dimensional computer graphics (CG) worlds via the Internet where multiple users can enjoy synchronous communications with voice, video and text. Users can control their avatars as a surrogate interface. In InterSpace users can walk around and interact with other people and interact with contents. In this paper, we describe the function-distributed architecture used in InterSpace. The architecture enables flexible configuration of server functions and load distribution. It also allows users to select media and client PCs to switch servers dynamically.

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.63-71
• /
• 2001

This paper introduces a method for calculation of dynamic stress occurring in flexible bodies of a moving multibody system by using commercial softwares DADS for dynamic analysis and MSC/NASTRAN for finite element analysis. Three methods for model transient response analysis of a flexible body are summarized. Elastic deformation of a flexible body can be described with normal modes and static modes composed of constraint modes and residual attachment modes. The deformation modes divided into fixed-interface modes and free-interface modes can be determined by using MSC/NASTRAN and selected for dynamic analysis. The dynamic results obtained from DADS are utilized to calculate dynamic stress by using mode-displacement method or mode-acceleration method of MSC/NASTRAN. As a numerical example of the analysis, we used a three dimensional slider-crank model with a flexible connecting rod.