• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1192-1196
• /
• 2010

As the space for installation of automotive exhaust system is limited, the space should be optimized with relation to the endurance and shape of the system. Geometric nonlinear analysis was used and deflection of bellows was assumed 6mm. Obtained results are as follows; (1) The Von-Mises stress of bellows is increased with increase of thickness or radius of bellows linearly. (2) As the principal stress varies according to the radius of convolution, it is necessary to decide the optimal radius of convolution.

• Transactions of Materials Processing
• /
• v.15 no.1 s.82
• /
• pp.9-14
• /
• 2006

In the present research, the simultaneous punching of ultra small size hole of $2\~10\;{\mu}m$ in diameter on flat rolled thin metal foils was conducted with elastic polymer punch. Workpiece used in the present investigation were the rolled pure copper of $3{\mu}m$ in thickness and CP titanium of 1.5fm in thickness. The metal foils were punched with the dies and arrays of circular and rectangular holes were made. The process set-up is similar to that of the flexible rubber pad farming or Guerin process. Arrays of holes were punched successfully in one step forming. The punched holes were examined in terms of their dimensions. The effects of the wafer die hole dimension and heat treatment of the workpiece on ultra small size hole formation of the thin foil were discussed. The process condition such as proper die shape, pressure, pressure rate and diameter-thickness ratio (d/t) were also discussed. The results in this paper show that the present method can be successfully applied to the fabrication of ultra small size hole away in a one step operation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.4
• /
• pp.363-367
• /
• 2011

Genioplasy with osteotomy is a flexible and useful procedure. However, osteotomy can cause different types of morbidity. Chin augmentation with porous polyethylene ($Medpor^{(R)}$) has become popular in the recent years. Porous polyethylene ($Medpor^{(R)}$) is an excellent biomaterial for reconstructing facial deformities. $Medpor^{(R)}$ has a porous architecture, which prevents capsule formation and decreases the degree of foreign-body reaction. In addition, it can be easily cut with scissors and molded, and it also maintains its shape. We report here on a satisfactory case of chin augmentation with using porous polyethylene ($Medpor^{(R)}$).

• Journal of Electrochemical Science and Technology
• /
• v.11 no.2
• /
• pp.155-164
• /
• 2020

Here we report our preliminary results about nickel phosphide (Ni-P) electroless coating on the surface of cellulose paper (CP) and its feasibility as the anode for lithium (Li) batteries. In particular, CP can act as a flexible skeleton to maintain the mechanical structure, and the Ni-P film can play the roles of both the anode substrate and the active material in Li batteries. Ni-P films with different P contents were plated uniformly and compactly on the microfiber strands of CP. When they were tested as the anode for Li battery, their theoretical capacity per physical area was comparable to or higher than hypothetical pure graphite and P film electrodes having the same thickness. After the large irreversible capacity loss in the first charge/discharge process, the samples showed relatively reversible charge/discharge characteristics. All samples showed no separation of the plating layer and no detectable micro-cracks after cycling. When the charge cut-off voltage was adjusted, their capacity retention could be improved significantly. The electrochemical result was just about the same before and after mechanical bending with respect to the overall shape of voltage curve and capacity.

• Journal of the Korean Society of Costume
• /
• v.58 no.1
• /
• pp.1-8
• /
• 2008

The purpose of this study was to investigate the mechanical properties and hand values of polypropylene knit and to analyze its color-fastness for light, laundering and abrasion, comparing to nylon and polyester knits. The results of this study were as follows: 1. Polypropylene stretched more with less force than nylon and polyester and its elastic recovery and shape stability were better than nylon and polyester. 2. Polypropylene was more flexible than nylon and polyester. 3. Polypropylene stretched more easily for shearing but its recovery from shearing was less than nylon and polyester. 4. Polyester had smoother surface than nylon and polyester. 5. Polypropylene was compressed more easily than polyester with less force but less than nylon. Its recovery from compression was more than nylon and polyester. 6. Polypropylene had lower KOSHI and SHARI values and higher FUKURAMI value than nylon and polyester. It had better T.H.V. value than nylon but less than! polyester. 7. Color fastness of polypropylene for lanudering, light, and abrasion in wet and dry conditions was good except polypropylene dyed with red color.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.403-408
• /
• 2001

Structure-borne noise and vibration is one of the main complaints of home appliances such as refrigerators, washing machines, air conditioners, etc. There have been many efforts to reduce the emitting noise and vibration. Mostly the efforts have been concentrated to optimize the mounts shape and its material properties realizing that the vibration power is mainly transmitted to the structure via mounts. It is known that softer mounts have the better vibration isolation effect. But mounts have another important function in addition to the vibration isolation. That is to support the motor and compressor safely. Thus mounts should be stiff enough to resist the supporting items. But the two properties, stiff and soft, are contradict each other. So the designer should compromise the two complicity properties properly in between. Noticing that, motors and compressors themselves are very quite until they are connected to the base structure via mounts, wire connecting idea was proposed in this work. Instead of using conventional mounts, as shown in Fig 4, compressor was mounted using six wires as shown in Fig 5. Since wire is very flexible in bending but stiff in tension, we can realize the ideal mount design requirements, stiff enough to support and soft enough to isolate vibration power. The suggesting idea was tested with an air conditioner outdoor unit.

• Steel and Composite Structures
• /
• v.22 no.1
• /
• pp.25-43
• /
• 2016

This paper presents the results of an experimental study investigating the effects of anchorage systems used in externally bonded steel plates on the strength and ductility of reinforced concrete structures. In the literature, diagonal steel plates bonded to frames were designed to be more flexible than the connections to eliminate the possible effect of the connection flexibility. However, to better evaluate the performance of the strengthened structures, the strength and behavior of connections should also be considered. The purpose of this study was to experimentally investigate the effects of different connection types of steel plates bonded to the frame using anchors on the strengthened RC structures. For this purpose, eleven specimens were designed to simulate the interior and exterior connection behavior. Two of these were used as the control beams and remaining nine for the investigation of the functionality of the end steel plates. Experimental results show that the load carrying capacity of the strengthened beams is directly related to the connection types of the steel plates. For the interior connections, L-shaped end plates that were strengthened using steel anchors must have adequate stiffness to prevent its shape. While, for the exterior connections, the connection with three anchors carried more load than the other exterior connections.

• Journal of Korea Multimedia Society
• /
• v.16 no.4
• /
• pp.520-528
• /
• 2013

Makeup simulation is a tool that tests various makeup methods on a virtual digital face using input and display devices. Although several simulation systems supporting various makeup styles have been recently developed, most systems have many limitations on realistic skin representations because they use 2D facial images. We develope a realistic makeup simulation method which can control skin reflectance and roughness parameters. The method allows a user to simulate makeup applications while changing skin parameters using high-resolution facial data acquired by 3D scanners. Besides we use a point-based shape representation which enables simple and flexible 3D rendering, and provide a more realistic makeup simulation by applying different skin parameters on each part of the face.

• Journal of the Korean Institute of Rural Architecture
• /
• v.16 no.1
• /
• pp.111-117
• /
• 2014

The aim of this study is to find out the pattern of Ger form, inner spatial composition of Mongolian Ger house, and to take a dig at the structural or symbolic elements of nomadic architecture of Ger. To the point of view of corresponding to living and space of housing, remarkable characteristics of Ger Architecture is able to pull down and recombine the structures of nomadic house. Even though urbanization of Mongolia has spreading rapidly in a whole nation, most of people preserves traditional housing pattern within Ger. The ways of survey are to study of traditional home of Mongolia, and then field work at residence or mountain area in Ulan Bator and Gorkhi Terelj National Park area. This survey contains the form, size, structure, spatial composition of living space, structure, and materials. There are three results as follows: First, the form of Ger house is like a pyramidal or crown roof style to approximate to the round shape of it. Usually they had lived in nomadic way of life, so the Ger had a movable and flexible structure. Second, the Ger is easy to build up and deconstruct to move or find a new pasture. Third, the Mongolian Ger structure is composed by mainly five elements that are Khana, Khaalga, Toono, Bagana, and Uni. It has a hierarchy of internal spaces which are classified to gender, orientation, and property.

• Journal of KIISE:Databases
• /
• v.30 no.2
• /
• pp.145-156
• /
• 2003

Most of the content-based image retrieval systems focuses on similarity-based retrieval of natural picture images by utilizing color. shape, and texture features. For the neuroscience image databases, we found that retrieving similar images based on global average features is meaningless to pathological researchers. To realize the practical content-based retrieval on images in neuroscience databases, it is essential to represent internal contents or semantics of images in detail. In this paper, we present how to represent image contents and their related concepts to support more useful retrieval on such images. We also describe the operational semantics to support these advanced retrievals by using object-oriented message path expressions. Our schemes are flexible and extensible, enabling users to incrementally add more semantics on image contents for more enhanced content searching.