• Tribology and Lubricants
• /
• v.30 no.3
• /
• pp.139-145
• /
• 2014

Nowadays, most micro-patterns are manufactured during flow line production. However, a conventional rotary chemical mechanical polishing (CMP) system has a limited throughput for the fabrication of large and flexible electronics. To overcome this problem, we propose a novel linear roll-CMP system for the planarization of large-area electronics. In this paper, we present a statistical analysis on the linear roll-CMP process of copper-clad laminate (CCL) to determine the impacts of process parameters on the material removal rate (MRR) and its non-uniformity (NU). In the linear roll-CMP process, process parameters such as the slurry flow rate, roll speed, table feed rate, and down force affect the MRR and NU. To determine the polishing characteristics of roll-CMP, we use Taguchi's orthogonal array L16 (44) for the experimental design and F-values obtained by the analysis of variance (ANOVA). We investigate the signal-to-noise (S/N) ratio to identify the prominent control parameters. The "higher is better" for the MRR and "lower is better" for the NU were selected for obtaining optimum CMP performance characteristics. The experimental and statistical results indicate that the down force and roll speed mainly affect the MRR and the down force and table feed rate determine the NU in the linear roll-CMP process. However, over 186.3 N of down force deteriorates the NU because of the bending of substrate. Roll speed has little relationship to the NU and the table feed rate does not impact on the MRR. This study provides information on the design parameter of roll-CMP machine and process optimization.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.311-311
• /
• 2013

The resistance switching memory devices have several advantages to take breakthrough for the limitation of operation speed, retention, and device scale. Especially, the metal-oxide materials such as ZnO are able to fabricate on the flexible and visible transparent plastic substrate. Also, the quantum dots (QDs) embedded in dielectric layer could be improve the ratio between the low and the high resistance becauseof their Coulomb blockade, carrier trap and induced filament path formation. In this study, we irradiated 0.2-MeV-electron beam on the ZnO/QDs/ZnO structure to control the defect and oxygen vacancy of ZnO layer. The metal-oxide QDs embedded in ZnO layer on Pt/glass substrate were fabricated for a memory device and evaluated electrical properties after 0.2-MeV-electron beam irradiations. To formation bottom electrode, the Pt layer (200 nm) was deposited on the glass substrate by direct current sputter. The ZnO layer (100 nm) was deposited by ultra-high vacuum radio frequency sputter at base pressure $1{\times}10^{-10}$ Torr. And then, the metal-oxide QDs on the ZnO layer were created by thermal annealing. Finally, the ZnO layer (100 nm) also was deposited by ultra-high vacuum sputter. Before the formation top electrode, 0.2 MeV liner accelerated electron beams with flux of $1{\times}10^{13}$ and $10^{14}$ electrons/$cm^2$ were irradiated. We will discuss the electrical properties and the physical relationships among the irradiation condition, the dislocation density and mechanism of resistive switching in the hybrid memory device.

• Explosives and Blasting
• /
• v.34 no.4
• /
• pp.10-18
• /
• 2016

Explosive blasting utilizes the energy produced from the explosion of explosive materials. Since the black powder, the first type of explosive, was invented, various types of explosives have been developed until a recent emulsion explosive which is powerful as well as safe in use. The detonators continue to be developed from safety fuse to the recent electronic detonators which allow extremely accurate and flexible control of delay time. However, the good explosives and detonators do not always lead to the good blast results. It entirely depends on the blast engineer. It is necessary to develop the empirical or theoretical models based on the field experience and sound theoretical algorithm. Such models would be very useful for blast design and, furthermore, provide the idea of further technical development. This paper introduces some models used in explosive blasting and attention to be paid for field application.

• Journal of Biomedical Engineering Research
• /
• v.26 no.5
• /
• pp.343-349
• /
• 2005

Continuously motivating people to exercise regularly is more important than finding a way out of barriers such as lack of time, cost of equipment, lack of nearby facilities, and poor weather. Our proposed system presents practicable methods of motivation through a diverse exercise aid system. The Health Improvement and Management System (all-in-one system which saves space and maintenance costs) measures and evaluates a diverse body shape analysis and physical fitness test and directs users to automated personalized exercise prescription which is prescribed by the expert system of three types of exercise templates: aerobics, anaerobics, and leisure sports. Automated personalized exercise prescriptions are built into XML based documents because the data needs to be in the form of flexible, expansible, and convertible structures in order to process various exercise templates, BIOFIT, a digital exercise trainer, monitors and provides feedback on the physiological parameters while users are working out in the gymnasium. If these parameters do not range within the prescribed target zone, the device will alarm users to control the exercise and make the exercise trainer adjust systemically the proper exercise level. Numeric health information such as the report of the physical fitness test and the exercise prescription makes people stay interested in exercising. In addition, this service can be delivered through the Internet.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.3
• /
• pp.531-542
• /
• 2012

The thesis covers the trend of research on bio-based polyurethane which is made from polyols derived mainly from plant oils and isocyanates. Castor oil is a triglyceride of ricinoleic acid containing hydroxyl group. Hydroxylation is done on the unsaturated bonds of the oils by the reactions of epoxidation/ring opening, hydroformylation/hydrogenation, ozonolysis/hydrogenation, and thiol-ene reaction. Polyols from hyperbranch, primary alcohol, polysaccharide have been studied to control the reactivity of the polyol and morphology of the microdomains. Besides, researches cover biodegradable polylactic acid polyol for medical use, fatty acid dimer polyol for the prevention of hydrolysis, and polyol with ionic group for water-borne polyurethane. Bio-based polyurethanes are being used in flexible and rigid foams, coatings, sealants, and elastomers.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.11.2-11.2
• /
• 2011

Polymer based organic photovoltaics have attracted a great deal of attention due to the potential cost-effectiveness of light-weight and flexible solar cells. However, most BHJ polymer solar cells are not thermally stable as subsequent exposure to heat drives further development of the morphology towards a state of macrophase separation in the micrometer scale. Here we would like to show three different approaches for developing new electroactive polymers to improve the thermal stability of the BHJ solar cells, which is a critical problem for the commercialization of these solar cells. For one of the examples, we report a new series of functionalized polythiophene (PT-x) copolymers for use in solution processed organic photovoltaics (OPVs). PT-x copolymers were synthesized from two different monomers, where the ratio of the monomers was carefully controlled to achieve a UV photo-crosslinkable layer while leaving the ${\pi}-{\pi}$ stacking feature of conjugated polymers unchanged. The crosslinking stabilizes PT-x/PCBM blend morphology preventing the macro phase separation between two components, which lead to OPVs with remarkably enhanced thermal stability. The drastic improvement in thermal stabilities is further characterized by microscopy as well as grazing incidence X-ray scattering (GIXS). In the second part of talk, we will discuss the use of block copolymers as active materials for WOLEDs in which phosphorescent emitter isolation can be achieved. We have exploited the use of triarylamine (TPA) oxadiazole (OXA) diblock copolymers (TPA-b-OXA), which have been used as host materials due to their high triplet energy and charge-transport properties enabling a balance of holes and electrons. Organization of phosphorescent domains in TPA-b-OXA block copolymers is demonstrated to yield dual emission for white electroluminescence. Our approach minimizes energy transfer between two colored species by site isolation through morphology control, allowing higher loading concentration of red emitters with improved device performance. Furthermore, by varying the molecular weight of TPA-b-OXA and the ratio of blue to red emitters, we have investigated the effect of domain spacing on the electroluminescence spectrum and device performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1745-1748
• /
• 2005

Near-infrared spectroscopy (NIRS) can be used to monitor brain activation by measuring changes in the concentration of oxy- and deoxy-hemoglobin (Hb) by their different spectra in the near-infrared range. Because NIRS is a noninvasive, highly flexible and portable device, it is very suitable to study brain activation when a human repeatedly performs a manipulative task, and possibly provides useful information to construct human adaptive mechatronics (HAM). There is some evidence that the dorsolateral prefrontal cortex (DLPFC) plays a major role in working memory and it is proposed that the use of working memory decreases as a human develops manipulative skills. In the present study, we investigated the activation of the dorsolateral prefrontal cortex (DLPFC) of the brain in Brodmann's areas 9 and 46 in drawing tasks to examine whether NIRS can measure the changes of DLPFC activation as a human develops manipulative skills. Subjects performed a mirror image drawing task and a square drawing task by ones' left hands. In the mirror image task the subject drew following a star shape based on a mirror image of it, but square drawing did not involve mirror image and was estimated to be simpler. The changes of the concentration of oxy-Hb was higher in the mirror image drawing than the square drawing in most subjects. The changes of oxy-Hb decreased as the subject repeated the drawing task in most subjects. In conclusion, The activation of DLPFC measured by NIRS can reflect the brain activity in the development of manipulative skills.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.3
• /
• pp.90-98
• /
• 2004

This paper illustrates some practical geographic information system (GIS) applications for aiding fishery managers and coastal area planners in analysing the likely control scheme of coastal farming areas, and in providing a flexible framework for decision making on fishery development and zoning issues. The effective management of marine farming operation is vitally important since it can greatly influence economic availability by determining capital outlay and by affecting running costs, rates of productions and mortality factors. GIS has been widely adopted elsewhere as a potent management tool in both the private and public sectors. GIS is now being extensively adopted in marine-associated activities. Here, we have used GeoMania v2.5 GIS software and its 3D Analyst extension module to visualize marine farming areas data that were collected around the Jinhae bay.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.1
• /
• pp.60-68
• /
• 2010

This study was conducted to evaluate the effects of lotus leaf powder on the qualitative characteristics of Jeung-Pyun (traditional Korean fermented rice cake). To achieve the highest volume and specific volume, 4% lotus leaf powder was required. However the moisture content dropped as the lotus leaf powder was added to the mixture. In addition, pH of Jeung-Pyun decreased the longer it was allowed to ferment, but the pH increased after steaming. We also evalusted the transparency of Jeung-Pyun as lotus leaf powder was added. As the lotus leaf powder was added, the L-value decreased and the a-value and b-value increased. Additionally, the hardness, chewiness and brittleness of Jeung-Pyun increased as more lotus leaf powder was added (p<0.05), but the springiness and cohesiveness did not change. The Jeung-Pyun also became darker and the cells became less uniform as the level of lotus powder increased. A control group of Jeung-Pyun without lotus leaf powder produced the strongest takju flavor, while the sourness decreased as more lotus leaf powder was added. The addition of 2% and 4% lotus leaf powder resulted in the chewiest and most flexible Jeung-Pyun. The results of this evaluation showed that Jeung-Pyun with 4% lotus leaf powder had the best appearance, flavor, texture, and taste, and was generally the most preferred Jeung-Pyun. Finally, SEM evaluation of the Jeung-Pyun, revealed that, higher levels of lotus leaf powder resulted in larger and less consistent pores and bubbles.

• Architectural research
• /
• v.22 no.2
• /
• pp.41-52
• /
• 2020

Laboratory buildings with specialized equipment and ventilation systems pose challenges in terms of efficient energy use and initial construction costs. Additionally, lab spaces should have flexible and efficient layouts and provide a comfortable indoor research environment. Therefore, this study aims to identify the correlation between the facade of a building and its interior layout from case studies of energy-efficient research labs and to propose passive energy design strategies for the establishment of an optimal research environment. The case studies in this paper were selected from the American Institute of Architects Committee on the Environment Top Ten Projects and Leadership in Energy and Environmental Design (LEED) certified research lab projects. In this paper, the passive design strategies of space zoning, façade design devices to control heating and cooling loads were analyzed. Additionally, the relationships between these strategies and the interior lab layouts, lab support spaces, offices, and circulation areas were examined. The following four conclusions were drawn from the analysis of various cases: 1) space zoning for grouping areas with similar energy requirements is performed to concentrate similar heating and cooling demands to simplify the HVAC loads. 2) Public areas such as corridor, atrium, or courtyard can serve as buffer zones that employ passive solar design to minimize the mechanical energy load. 3) A balanced window-to-wall ratio (WWR), exterior shading devices, and natural ventilation systems are applied according to the space programming energy requirements to minimize the dependence on mechanical service. 4) Lastly, typical laboratory space zoning categories can be revised, reversed, and even reconfigured to minimize the energy load and adjust to the site context. This study can provide deep insights into various design strategies employed for construction of green laboratories along with intuitive arrangement of various building components such as laboratory spaces, lab support spaces, office spaces, and common public areas. The key findings of this study can contribute towards creating improved designs of laboratory facilities with reduced carbon footprint and greenhouse emissions.