• 한국음향학회지
• /
• 제42권1호
• /
• pp.57-66
• /
• 2023

본 연구에서 제안한 에너지 하베스팅 장치는 입구가 넓고 출구가 좁은 퍼넬형 에너지 하베스터(Funnel Type Energy Harvester, FTEH)에 Macro Fiber Composite(MFC)가 외팔보 형태로 장착되어 있는 구조로서 MFC의 구조를 변화 시켰을 때 FTEH에 수확하는 에너지양의 특성을 이론과 실험을 통하여 분석하였다. MFC의 길이를 50 % 증가 시켰을 때 진동 변위는 3.5배 증가하였고, 두께를 75 % 감소시 30.9배 증가하였다. 수조 실험에서 최대 전력량은 스파이럴 스크루가 장착된 상태의 유연한 지지대에 수직으로 설치된 MFC가 스파이럴 스크루가 없고 견고한 지지대에 수평으로 설치된 경우보다 약 5배 정도 높았다. FTEH에 최적저항 4,010 kΩ을 적용하여 유속 0.24 m/s일 때 FTEH의 출력을 350 s 동안 커패시터에 에너지를 저장하면 4 ㎼·s에 도달하였다. 빠른 유속으로 유연한 지지대에 수직으로 설치된 대면적 MFC의 커패시터 충전 시간을 길게 하면 충전 에너지를 증가시킬 수 있음을 확인하였다.

• Geomechanics and Engineering
• /
• 제11권2호
• /
• pp.309-323
• /
• 2016

As the forefront of structural design method, capacity spectrum method can be applied conveniently, and through this method, deformation demand of structure can be considered. However, there is no research for the seismic application in the structure of sheet pile retaining wall to report. Therefore, focusing on laterally loaded stabilizing sheet pile wall, which belongs to flexible cantilever retaining structure and meets the applying requirement of capacity spectrum method from seismic design of building structure, this paper studied an approach of seismic design of sheet pile wall based on capacity spectrum method. In the procedure, the interaction between soil and structure was simplified, and through Pushover analysis, seismic fortification standard was well associated with performance of retaining structure. In addition, by comparing the result of nonlinear time history analysis, it suggests that this approach is applicable.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.202-207
• /
• 1993

A theoretical and experimental study is presented for the force holding control of a miniature robotic ringer which is driven by a pair of piezoelectric unimorph cells. In the theoretical analysis, one finger is modeled as a flexible cantilever with a tactile force sensor at the tip and the mate of the finger is a solid beam supposed with sufficient stiffness. Further, the force sensor is modeled by a one-degree-of-freedom, mass-spring system and the output of sensor is then described by the sensor stiffness multiplied by the relative displacement. The problem investigated in this paper is that two typical holding tasks of the human finger are picked up and applied to the robotic finger. One is the work holding a stationary object with a prescribed, time-varying force and the other one is to keep the contacted force constant even if the object is in motion. The simple PID feedback control scheme is used to control the minute gripping force of order 0.01 Newton. It is shown both experimentally and theoretically that the artificial finger with the piezoelectric actuator works well in the minute force holding of the tiny object.

• Wind and Structures
• /
• 제20권3호
• /
• pp.423-448
• /
• 2015

In this paper the unsteady fluid-structure interaction (FSI) problems with large structural displacement are solved by partitioned solution approaches in the arbitrary Lagrangian-Eulerian finite element framework. The incompressible Navier-Stokes equations are solved by the characteristic-based split (CBS) scheme. Both a rigid body and a geometrically nonlinear solid are considered as the structural models. The latter is solved by Newton-Raphson procedure. The equation governing the structural motion is advanced by Newmark-${\beta}$ method in time. The dynamic mesh is updated by using moving submesh approach that cooperates with the ortho-semi-torsional spring analogy method. A mass source term (MST) is introduced into the CBS scheme to satisfy geometric conservation law. Three partitioned coupling strategies are developed to take FSI into account, involving the explicit, implicit and semi-implicit schemes. The semi-implicit scheme is a mixture of the explicit and implicit coupling schemes due to the fluid projection splitting. In this scheme MST is renewed for interfacial elements. Fixed-point algorithm with Aitken's ${\Delta}^2$ method is carried out to couple different solvers within the implicit and semi-implicit schemes. Flow-induced vibrations of a bridge deck and a flexible cantilever behind an obstacle are analyzed to test the performance of the proposed methods. The overall numerical results agree well with the existing data, demonstrating the validity and applicability of the present approaches.

• Wind and Structures
• /
• 제15권3호
• /
• pp.189-208
• /
• 2012

Lock-in and drag amplification phenomena are studied for a flexible cantilever using a simplified fluid-structure interaction approach. Instead of solving the 3D domain, a simplified setup is devised, in which 2D flow problems are solved on a number of planes parallel to the wind direction and transversal to the structure. On such planes, the incompressible Navier-Stokes equations are solved to estimate the fluid action at different positions of the line-like structure. The fluid flow on each plane is coupled with the structural deformation at the corresponding position, affecting the dynamic behaviour of the system. An Arbitrary Lagrangian-Eulerian (ALE) approach is used to take in account the deformation of the domain, and a fractional-step scheme is used to solve the fluid field. The stabilization of incompressibility and convection is achieved through orthogonal quasi-static subscales, an approach that is believed to provide a first step towards turbulence modelling. In order to model the structural problem, a special one-dimensional element for thin walled cross-section beam is implemented. The standard second-order Bossak method is used for the time integration of the structural problem.

• 대한기계학회논문집A
• /
• 제23권11호
• /
• pp.2007-2013
• /
• 1999

A Newly proposed control methodology applied to the aeroelastic system experiencing flutter is investigated and its performance is verified experimentally. The flexible cantilever beam slicked with piezofilm sensor and piezoceramic actuator is modelled in physical domain. Dynamic moment equation for the system is derived via Ito's stochastic differential equation and F-P-K equation. Also system's characteristics in stochastic domain is analyzed simultaneously. LQG controller is designed and used in physical and stochastic domain. It is shown experimentally that the vibration of beam is controlled effectively by designed LQG controller in physical domain. By comparing the result with that of LQG controller designed in stochastic domain, it is shown that the new control method, called Heo-stochastic control technique, has better performance as a controller.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1292-1297
• /
• 2000

외부로부터 불규칙 교란을 받는 동력학계에 대해 '허-확률 제어기법'을 이용하여 설계된 제어기의 성능을 수치모사를 통하여 검증하였다. 압전소자를 알루미늄 보에 부착하여 다중입출력의 복합재료보로 만들고, 기반에 불규칙한 외부교란을 받는계에 대한 모델링을 수행하였으며, Ito의 확률미분방정식과 F-P-K방정식을 이용하여 동적 모멘트 방정식을 유도하여 시스템의 확률영역에서의 특성을 알아보았다. 본 연구에서 제어기의 목표는 외부교란의 입력에 의해 발생하는 시스템의 모멘트 응답크기를 줄이는 방향으로 전개하였고, 확률영역에서의 MIMO PI제어기('허-확률 MIMO PI 제어기')를 설계하여 시간영역에서의 응답형태를 관찰하였다.

• Smart Structures and Systems
• /
• 제3권4호
• /
• pp.405-422
• /
• 2007

A new hybrid damping technique for vibration reduction in flexible structures, wherein a combination of layers of hard passive damping alloys and active (smart) magnetostrictive material is used to reduce vibrations, is proposed. While most conventional vibration control treatments are based exclusively on either passive or active based systems, this technique aims to combine the advantages of these systems and simultaneously, to overcome the inherent disadvantages in the individual systems. Two types of combined damping systems are idealized and studied here, viz., the Noninteractive system and the Interactive system. Frequency domain studies are carried out to investigate their performance. Finite element simulations using previously developed smart beam elements are carried out on typical metallic and laminated composite cantilever beams treated with hybrid damping. The influence of various parameters like excitation levels, frequency (mode) and control gain on the damping performance is investigated. It is shown that the proposed system could be used effectively to dampen the structural vibration over a wide frequency range. The interaction between the active and passive damping layers is brought out by a comparative study of the combined systems. Illustrative comparisons with 'only passive' and 'only active' damping schemes are also made. The influence and the mode dependence of control gain in a hybrid system is clearly illustrated. This study also demonstrates the significance and the exploitation of strain dependency of passive damping on the overall damping of the hybrid system. Further, the influence of the depthwise location of damping layers in laminated structures is also investigated.

• Smart Structures and Systems
• /
• 제5권1호
• /
• pp.23-42
• /
• 2009

In order to reduce vibration or to control shape of structures made of metal or composites, piezoelectric materials have been extensively used since their discovery in 1880's. A recent trend is also seen to apply piezoelectric materials to flexible structures made of rubber-like materials. In this paper a non-linear finite element model using updated Lagrangian (UL) approach has been developed for static analysis of rubber-elastic material with surface-bonded piezoelectric patches. A compressible stain energy function has been used for modeling the rubber as hyperelastic material. For formulation of the nonlinear finite element model a twenty-node brick element is used. Four degrees of freedom u, v and w and electrical potential ${\varphi}$ per node are considered as the field variables. PVDF (polyvinylidene fluoride) patches are applied as sensors/actuators or sensors and actuators. The present model has been applied to bimorph PVDF cantilever beam to validate the formulation. It is then applied to study the smart rubber components under different boundary and loading conditions. The results predicted by the present formulation are compared with the analytical solutions as well as the available published results. Some results are given as new ones as no published solutions available in the literatures to the best of the authors' knowledge.

• 대한기계학회논문집A
• /
• 제41권1호
• /
• pp.31-40
• /
• 2017

1990년대 중반에 개발된 절대절점좌표는 탄성체 동역학 해석에 활용되고 있다. 운동방정식을 유도하는 과정에서 변위장을 이루는 다항식의 차수가 증가하면 필연적으로 자유도가 증가하게 되고, 이는 해석 시간의 증가로 이어진다. 따라서 본 연구에서는 차원 운동방정식을 무차원 운동방정식으로 전환함으로써 해석 시간을 단축시키고자 하였다. 위치 벡터를 이루는 형상 함수는 무차원으로, 절점 좌표는 길이 차원으로 정리한 후 무차원화하는 변수를 통해 무차원 질량행렬, 무차원 선형 강성행렬 및 무차원 보존력을 유도하였다. 무차원 운동방정식의 검증과 효율성은 정적 처짐에 대한 정해가 존재하는 외팔보 및 단진자 예제를 통해 제시하였다.