• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.442-448
• /
• 2014

For the first time, a novel analytical model of the net gain for a Raman-EDFA hybrid optical amplifier (HOA) is proposed and its various parameters optimized using a genetic algorithm. Our method has been shown to be robust in the simultaneous analysis of multiple parameters (Raman length, EDFA length, and pump powers) to obtain large gain. The optimized HOA is further investigated at the system level for the scenario of a 50-channel DWDM system with 0.2-nm channel spacing. With an optimized HOA, a flat gain of >17 dB is obtained over the effective ITU-T wavelength grid with a variation of less than 1.5 dB, without using any gain-flattening technique. The obtained noise figure is also the lowest value ever reported for a Raman-EDFA HOA at reduced channel spacing.

• 보존과학연구
• /
• 통권17호
• /
• pp.1-19
• /
• 1996

Desalting methods for chloride ions from the excavated iron objects were studied. These methods were compared with room temperature and heating condition of treating solution. During the Desalting treatments the $Cl^-$concentration of the solution were measured regularly and the plotted for $Cl^-$concentrations the square root of time, heating methods showed that the $Cl^-$ ions are more extracted. For the desalting treatments these plots were found to be flattening line, it was showed the changing second solution. Also, the changing solution in the room temperation detected less $Cl^-$ ions of heating treatment solution. As the examination for the relative humidity has compared for desalting objects during 8 days, it was showed a re-corroded appearance of R.H90%. As it did not detected a $Cl^-$ ions of re-corroded section, these phenomena were showed the naturally occuring corrosion of the objects in the high relative humidity.

• 대한두개안면성형외과학회지
• /
• 제20권5호
• /
• pp.341-344
• /
• 2019

Relapsing polychondritis (RP) is a rare autoimmune disorder of unknown etiology characterized by recurrent episodes of inflammation and the destruction of cartilaginous tissues, primarily involving the ear, nose, and the respiratory tract. Nasal chondritis is present in 24% of patients at the time of diagnosis and develops subsequently in 53% throughout the diseases progress. Progressive destruction of nasal cartilage leads to the characteristic flattening of the nasal bridge, resulting in the saddle nose deformity. In patients with RP, surgical management for saddle nose is carefully decided due to the disease relapsing characteristics. We present a RP patient with a saddle nose deformity who underwent reconstruction rhinoplasty with autologous costal cartilage grafting. At 6-month follow-up, the patient retained good esthetic results and showed neither complication nor relapse of RP.

• 한국의학물리학회지:의학물리
• /
• 제25권4호
• /
• pp.210-217
• /
• 2014

이 연구는 비편평화여과기(flattening filter-free, FFF) 빔을 이용한 폐 정위절제방사선치료(stereotactic ablative radiotherapy, SABR)에 대하여 서로 다른 선량계산 알고리즘의 선량적 효과를 조사하였다. SABR를 받은 10명의 폐암 환자를 대상으로하여 평가하였다. 모든 치료계획은 Eclipse 치료계획시스템의 Acuros XB (AXB) 알고리즘을 이용하여 수립되었다. 다른 선량계산 알고리즘과 비교를 위하여, 추가적으로 anisotropic analytic algorithm (AAA) 알고리즘을 적용한 치료계획을 재 수립하였다. 두 알고리즘 평가를 위해서, 치료표적과 손상위험장기의 선량체적히스토그램(dose-volume histogrim, DVH)를 분석하였다. 그리고 기술적 인자로써 계산시간과 총 MU 값을 평가하였다. DVH 비교분석을 통해, PTV의 최대선량은 AXB이 AAA 보다 5.2% 높았으며 최소선량은 4.4% 낮게 나타났다. PTV의 $V_{105%}$에서 7.06%까지 큰 차이를 나타났다. 폐의 최대선량은 AXB 치료계획에서 약간 크게 나타났다. 동측성 폐에 5, 10과 20 Gy 선량이 조사되는 체적은 AAA 보다 AXB에서 더 크게 나타났으나 대측성 폐에 대해서는 거의 비슷하게 나타났다. 척수와 심장에서 최대선량의 차이도 크지 않았다. 계산시간의 경우, AXB가 AAA보다 13.7% 정도 소요시간이 적었고 MU 값은 AXB에서 3.47% 더 많았다. 이 연구의 결과들은 회전조절치료 기법을 포함하여 FFF 빔이 적용된 폐 SABR 치료계획에서 AXB 알고리즘은 선량계산의 정확성과 계산시간의 감소의 장점을 제공할 수 있을 것이다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.310-313
• /
• 2007

This paper covers finite element simulations to evaluate the bending limit of double pipe for tube-hydroforming. The tube-hydroforming process starts with a straight precut tube. The tube is often prebent in a rotary draw bending machine to fit the hydroforming tool. During the bending the tube undergoes significant deformation. So forming defects such as wrinkling, thinning and flattening are generated in the tube. Consequently we analyzed the effect of process parameters in rotary draw bending process and searched the optimized combination of process parameters to minimize the forming defects using orthogonal arrays. The characteristic to evaluate the effects of the process parameters is the bending angle which wrinkling is generated, we define the bending angle at that time as bending limit. Of many process parameters, the process parameters of the bending process such as gab between inner and outer tube, boosting force, dimensions of mandrel were analyzed. And we observed the deformation modes of bent double pipe at specific bending angle in each parameter combination.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제12권1호
• /
• pp.202-209
• /
• 1990

A retrospective study of 498 patients (591 joints) who had diagnosed as having internal derangement of the temporomandibular joint by history, clinical examination, and arthrography were evaluated. 66 patients (70 joints) were diagnosed as having meniscus perforation between the joint compartments. In those patients with pain (11 joints : 15.7%), pain and crepitation (24 joints : 34.3%), pain, crepitation and LOM (31 joints : 44.3%), and painless crepitation with LOM (4 joints : 5.7%) complained clinically. All these patients who had perforation showed irregularity in outline of the contrast material, bone contour-contrast material gaps, flattening of cortical layer of articular eminence. On the 20 joints treated surgically, 17 joints were found to have meniscus perforation at the time of surgery which correlated with their pre-operative radiographic and clinical diagnosis. Three joints could not found perforation of meniscus. This study was designed to examine of the incidences of the meniscus perforation in the above patients and to assess the diagnostic accuracy of arthrography by comparing the results with the finding of direct examination at TMJ surgery.

• 센서학회지
• /
• 제26권2호
• /
• pp.122-127
• /
• 2017

Graphene grown on copper-foil substrates by chemical vapor deposition (CVD) has been attracting interest for sensor applications due to an extraordinary high surface-to-volume ratio and capability of large-scale device fabrication. However, CVD graphene has a polycrystalline structure and a high density of grain boundaries degrading its electrical properties. Recently, processes such as electropolishing for flattening copper substrate has been applied before growth in order to increase the grain size of graphene. In this study, we systemically analyzed the effects of the process condition of electropolishing copper foil on the quality of CVD graphene. We observed that electropolishing process can reduce surface roughness of copper foil, increase the grain size of CVD graphene, and minimize the density of double-layered graphene regions. However, excessive process time can rather increase the copper foil surface roughness and degrade the quality of CVD graphene layers. This work shows that an optimized electropolishing process on copper substrates is critical to obtain high-quality and uniformity CVD graphene which is essential for practical sensor applications.

• Mycobiology
• /
• 제29권1호
• /
• pp.15-18
• /
• 2001

Protoplast fusion is a useful technique for establishing fungal hybrids to overcome the natural barriers. The ultrastructure of protoplast and its fusion process were observed using a scanning electron microscopy(SEM) and a transmission electron microscopy(TEM). The protoplasts were variable in size from $0.5{\sim}15{\mu}m$ in diameter, and the mean diameter was about $3{\sim}5{\mu}m$. It was impossible to discriminate protoplasts of Lentinula edodes from protoplasts of Coriolus versicolor by size and surface structure. Big aggregates of the dehydrated protoplasts were observed, after polyethylene glycol 4000 treatment. Nucleus, mitochondria, lipid granules and various vesicles having granules were scattered in the cytoplasm. The vesicles were heterogeneous in size and vary from one protoplast to another. The fused membrane layer of the two protoplasts was observed. Time protoplast membrane contact and reorganization of membrane components were essential condition for protoplast fusion. Transmission electron micrograph showed fused protoplasts and flattening of the cells in the area of the membrane contact. We hope that our electron microscopic observations provide some insights into the understanding of the fusion process of protoplast in fungi.

• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1126-1139
• /
• 2016

In this research, for the first time, a new optimization method, i.e., strength Pareto evolutionary algorithm II (SPEA-II), is developed for the burnable poison placement (BPP) optimization of a nuclear reactor core. In the BPP problem, an optimized placement map of fuel assemblies with burnable poison is searched for a given core loading pattern according to defined objectives. In this work, SPEA-II coupled with a nodal expansion code is used for solving the BPP problem of Kraftwerk Union AG (KWU) pressurized water reactor. Our optimization goal for the BPP is to achieve a greater multiplication factor ($K_{eff}$) for gaining possible longer operation cycles along with more flattening of fuel assembly relative power distribution, considering a safety constraint on the radial power peaking factor. For appraising the proposed methodology, the basic approach, i.e., SPEA, is also developed in order to compare obtained results. In general, results reveal the acceptance performance and high strength of SPEA, particularly its new version, i.e., SPEA-II, in achieving a semioptimized loading pattern for the BPP optimization of KWU pressurized water reactor.

• Industrial Engineering and Management Systems
• /
• 제9권4호
• /
• pp.323-338
• /
• 2010

In this paper, we introduce the implied volatility from Black-Scholes model and suggest a model for constructing implied volatility surfaces by using the two-dimensional cubic (bi-cubic) spline. In order to utilize a spline method, we acquire grid (knot) points. To this end, we first extract implied volatility curves weighted by trading contracts from market option data and calculate grid points from the extracted curves. At this time, we consider several conditions to avoid arbitrage opportunity. Then, we establish an implied volatility surface, making use of the two-dimensional cubic spline method with previously estimated grid points. The method is shown to satisfy several properties of the implied volatility surface (smile, skew, and flattening) as well as avoid the arbitrage opportunity caused by simple match with market data. To show the merits of our proposed method, we conduct simulations on market data of S&P500 index European options with reasonable and acceptable results.