• 반도체디스플레이기술학회지
• /
• 제13권4호
• /
• pp.83-90
• /
• 2014

This paper is about the yield rate of lower temperature furnace for wafer heat-treatment. The flat-zone that the temperature in furnace has uniform distribution specific area is the significant variable to the yield rate. In this study, we researched about the ways how to widen the flat zone in the furnace using CFD. As a result, we confirmed that the characteristic of the flat-zone was changed when SCU(Super Cooling Unit) was used. We considered temperature control with above.

• 한국지역지리학회지
• /
• 제12권3호
• /
• pp.339-351
• /
• 2006

뻘중심의 갯벌이 넓게 형성된 가로림만의 웅도리외 모래 갯벌과 염전이 발달한 영광 갯벌의 두우리, 수산 양식업이 발달한 곰소만 주변 지역을 대상으로 조석 주기, 갯벌 지형. 갯벌 퇴적물의 입도 특성과 주민 생활과의 관련성을 검토했다. 갯벌 주변 주민들에게 갯일은 농사일보다 우선되고, 갯벌에서 얻어지는 수입이 이들의 주소득원이다. 갯벌주변의 주민 생활은 조석 주기에 맞추어 이루어지고 있으며, 한사리 저조위 때는 가장 바쁘고 많은 소득을 올릴 수 있어 마치 장날과 같다. 뻘 갯벌에서는 패류 양식이 주이고, 모래 갯벌에는 안강망 어업이 활발하며, 해안에 접한 혼합 갯벌에는 염전이 발달한다. 또한 하나의 갯벌에도 경제 활동의 분화가 이루어져 조상대에는 염전과 양어장으로, 조간대에는 패류 양식장으로, 조하대는 굴, 김 양식징으로 이용된다.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.125-132
• /
• 2007

Inherent dynamic interaction between flexible disk and workpiece creates partially non-flat surface profile. A flat zone was defined using minimum depth of engagement. Several key parameters were defined to explain the characteristics of the zone. Process conditions including disk rotation speed, initial depth of cut and feed speed were varied to produce product profile database. Correlation between key factors was examined to find the characteristic dependencies. Trends of key parameters were displayed and explained. Higher flat zone ratio was observed for lower depth of cut and higher disk rotation speed. Ratio of minimum depth of cut against target depth of cut increased for higher feed speed and disk rotation speed but was insensitive to the depth of cut variation. The process transition was visualized by continuously displaying instantaneous orientation of the deflected disk and the location of key parameters were clearly marked for comparison.

• 한국생산제조학회지
• /
• 제22권3호
• /
• pp.402-407
• /
• 2013

In this paper, the image processing for flexible disk grinding and the effect of the grinding conditions on the flat zone length of a workpiece are investigated, with the purpose of automating the grinding process. To accomplish this, three issues should be carefully studied. The first is finding the relationship between the flat zone length and the grinding conditions such as the cutting speed and feeding speed. The second is developing a neural network algorithm to predict the flat zone. The third is developing an image processing algorithm to measure the flat zone length of a workpiece. Slope analysis is used to determine straight and curved sections during the image processing. For verification, the estimated length and the length from the image processing are compared with the length measured by a projector. There is a minimum difference of 1.7% between the predicted and measured values. The results of this paper will be useful in compiling a database for process automation.

• 한국생산제조학회지
• /
• 제19권5호
• /
• pp.672-677
• /
• 2010

The goal of this study is to simplify the measurement process of the flat zone length produced by a flexible disk grinding system for the process automation. The image of workpiece in the grinding process is obtained, and the cutting speed and the feeding speed are controlled carefully to maximize the flat zone length. The gradient, the inflection point and the length of the line in the image are calculated, and the length is also measured by using a projector. Processing conditions and inversely proportional to flat zone length was changing. The flat zone length is estimated by Neural network algorithm considering the process conditions with the estimated error range as 0.06~3.61%, the Neural network algorithm for the grinding process estimation is found to be useful for building the process automation database.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.664-669
• /
• 2002

Intertidal zone (tidal flat) is a place which is sometimes dry and sometimes wet depending on the tidal rhythm. Direct measurement of topography in the intertidal zone is very difficult to be achieved. The interface between wet and dry parts in the tidal flat, which can be identified from near infrared band of satellite image, is a 'depth contour' which corresponds to the sea level at the time of satellite pass. Aquisition of topography data in tidal flat is possible by combining various techniques such as (1) identification of the interface between wet and dry parts, (2) GCP correction of satellite image, and (3) realtime prediction of sea level elevation at the time of satellite pass. The algorithm was successfully applied in obtaining topography (bathymetry) data in the intertidal zone of Asan Bay in the west coast of Korea from 26 satellite images. The method is expected to be very efficient in making bathymetry data base in the western and southern parts of Korea where tidal flats are well developed in wide regions.

• 한국농공학회논문집
• /
• 제62권2호
• /
• pp.75-82
• /
• 2020

The Daehang-ri intertidal flat located the just outside of the Saemangeum dike has been reported to show new-developing flats. Based on the topographic surveys of 21 times from 2000 to 2016 by a leveling method every year, this site clearly shows variation of deposition/erosion in time and space. Deposition has consistently occurred at the rate of +3.75 cm per year at the area along the dike (Zone 1), and this tidal flat is expanding and prograding seaward. In the area of far from the dike (Zone 2), on the other hand, erosion prevails at the rate of -2.38 cm per year, and this zone tends to retreat landward. However, the erosional trend of Zone 2 has slightly slowed down since 2014. As a whole from 2000 to 2016, net deposition is recorded over 3.0 m at the upper beach and the area adjacent to the dike (Zone 1), while erosion up to 1.0 m in Zone 2. In conclusion, the results at the Daehang-ri intertidal flat clearly revealed that its topographic changes were induced by the artificial structures and water masses through its sluice gate. Counter-clockwise gyre newly created after the sea dikes construction probably results in relocating of sediment outside the dike 1 by transportation of materials eroded from the south to the north along the coast.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.257-260
• /
• 2006

West coast of Korea belongs to the five largest tidal-flat zones in the world. Aiming at the efficient management and preservation of the eco-system and the enhancement of the bio-productivity of the tidal-flat zones, development of a environment-friendly vehicle for tidal-flat area is being attempted. This paper deals with the description of the characteristics of the tidal-flat zones of west coast of Korea, the technology assessment of the related products in the ATV(All-Terrain Vehicle) market, the demand assessment for the resident people.

• 한국지구과학회지
• /
• 제22권2호
• /
• pp.120-129
• /
• 2001

곰소만 중앙부의 하부 조간대(lower tidal flat)에는 길이 1300m, 폭 400m규모의 조간대 모래톱(intertidal sand shoal)이 남북 방향으로 발달한다. 이 모래톱을 경계로 3개 구역으로 구분하고, 각 구역에서 표층 퇴적구조, 입도 분포, 퇴적물 이동량(집적율), 그리고 천부 퇴적상을 분석하여, 각 구역의 에너지 영역을 비교하였다. 그 결과 각 구역의 퇴적 특징은 다음과 같다: A 구역(offshorewards zone) -세립사(평균입도 3${\varphi}$), 혀모양 연흔, 월 평균 70mm의 집적율과 미발달생물교란구조, B 구역(sand shoal) -중립사(평균입도 2.5${\varphi}$), 사구(4${\sim}$5m의 파장),월 평균 30mm의 집적율과 미발달 생물교란구조, C 구역(onshorewards zone) - 조립질 실트(평균입도 5${\varphi}$), 굴곡형 연흔, 월 평균 10mm의 집적율과 잘 발달된 생물교란구조. 이러한 결과로부터 하부 조간대에 분포하고 있는 모래톱은 외해에서부터 유입되는 파랑의 에너지를 분산시키거나 또는 막아주는 역할을 하고 있는 것으로 추측된다. 즉 곰소만 조간대에 사주섬이 없음에도 불구하고, 저 에너지상태로 유지되고 있는 것은 만의 안쪽 지역에 위치하는 모래들이 방파제의 역할을 하고 있기 때문으로 사료된다.

• 한국공작기계학회논문집
• /
• 제17권5호
• /
• pp.123-130
• /
• 2008

In order to clarify detailed mechanism of the flexible disk grinding system, workpiece length was introduced and its performance was evaluated. Flat zone ratio increased as the workpiece length increased. Increasing wheel speed and depth of cut also enhanced process performance by producing larger flat zone ratio. Neural network system was successfully applied to predict minimum depth of engagement and flat zone ratio. An additional input parameter as workpiece length to the neural network system enhanced the prediction performance by reducing error rate. By rearranging the Input combinations to the network, the workpiece length was precisely predicted with the prediction error rate lower than 2.8% depending on the network structure.