Browse > Article

A Study on the Flat Surface Zone of the Flexible Disk Grinding System  

Yoo, Song-Min (경희대학교 테크노공학대학 기계공학과)
Publication Information
Transactions of the Korean Society of Machine Tool Engineers / v.16, no.6, 2007 , pp. 125-132 More about this Journal
Abstract
Inherent dynamic interaction between flexible disk and workpiece creates partially non-flat surface profile. A flat zone was defined using minimum depth of engagement. Several key parameters were defined to explain the characteristics of the zone. Process conditions including disk rotation speed, initial depth of cut and feed speed were varied to produce product profile database. Correlation between key factors was examined to find the characteristic dependencies. Trends of key parameters were displayed and explained. Higher flat zone ratio was observed for lower depth of cut and higher disk rotation speed. Ratio of minimum depth of cut against target depth of cut increased for higher feed speed and disk rotation speed but was insensitive to the depth of cut variation. The process transition was visualized by continuously displaying instantaneous orientation of the deflected disk and the location of key parameters were clearly marked for comparison.
Keywords
Flexible disk grinding; Flat zone; Key parameter;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Lim, H. S., Ryu, B. H., Gong, J. H. and Kim, H. W., 2004, 'Determication of Diamond Wheel Life in Ceramic Grinding', Transaction of KSMTE, Vol. 13, No. 1, pp. 16-21
2 Chi, L. Z., Kwak, J. S. and Ha, M. K., 2004, 'Geometric Error Prediction of Ground Surface by Using Grinding Force', Transaction of KSMTE, Vol. 13, No. 2, pp. 9-16
3 Kwak, J. S. and Ha, M. K., 2004, 'Effects of Traverse Speed on Dimensional Error in Abrasive Water-Jet', Transaction of KSMTE, Vol. 13, No. 3, pp. 1-7
4 Kurfess, T. R., 1988, 'Verification of Dynamic Grinding Model', Trans. ASME, J. of Dynmic Sys and Control, Vol. 110, No. 4, pp. 403-409   DOI
5 Yoo, S. M., Choi, M. J. and Kim Y. J., 2000, 'Model Development of Flexible Disk Grinding Process', KSME international J., Vol. 14, No. 10, pp. 1114-1121   과학기술학회마을
6 Yoo, S. M., 1996, 'A Study on the Flat Surface Generation Using Flexible Disk Grinding', J. of the KSPE, Vol. 13, No. 7, pp. 158-166
7 Yoo, S. M. and Shin, G. S., 2000, 'A Study of the Flexible Disk Grinding Process with Variable Control Stages', Transaction of KSMTE, Vol. 9, No. 1, pp. 81-87
8 Yoo, S. M., 2003, 'Disk Grinding Process with Linear Motor system', Proc. of KSMTE Fall Conf., pp. 374-378