• 펄프종이기술
• /
• 제36권2호
• /
• pp.39-46
• /
• 2004

In this paper, the effects of roll diameter and storage time in roll form, bending method and relative humidity on curl in copy paper and inkjet coated papers are investigated. In copy paper, more MD curl is showed at smaller roll diameter and the extension of bending time. However CD curl is hardly influenced by roll diameter and bending time. At high relative humidity, especially CD curl largely reduces. All inkjet coated papers without the primary or the secondary back coating during papermaking show the increase in MD curl and slight decrease in CD curl by MD bending regardless of the winding methods(TSO, TSI). The water spray as back coating results in the remarkable reduction of CD curl regardless of the winding methods. Drying on flat dryer after spraying the moisture on back side display the most excellent effect on the reduction of CD curl.

• 한국의류학회지
• /
• 제16권4호
• /
• pp.485-493
• /
• 1992

Three kinds of tight skirts, slim type, straight type, and semi-tight type were investigated to obtain necessary information about the size of the back slit. Fourteen college students put on these experimental clothes and walked on the flat floor, going up and down the stairs. The dimensions of the back slit were measured by width and length. The stride length was taken from the record of footprints of walking. The correlation between the body measurement, stride length and the size of the back slit was studied. As a result of this experiment, the findings are as follows: 1. The size of the back slits differed from each skirt type at the level of p<0.001. In the case of walking on the floor, the average dimension of the back slit was 14.0 cm long 5.0 cm wide for the slim type,9.5 cm long 2.8 cm wide for the straight type and 2.1 cm long 0.5 cm wide for the semi-tight type. 2. In the case of walking on the stairways, the average dimension of the back slit was 16.0 cm long 5.8 cm wide for the slim type, 12.4 cm long 3.9 cm wide for the straight type and 3.1 cm long 1.1 cm wide for the semi-tight type. 3. The correlation between the height (stature, waist height, knee height) and the size of back slit was 0.3 to 0.6. The correlation between the girth (waist, hip) and the size of back slit was 0.3 to -0.5. 4. The correlation between the stride length and the size of back slit was 0.76 for the slim skirt, 0.56 for the straight skirt, 0.28 for the semitight skirt.

• 한국지반공학회논문집
• /
• 제20권5호
• /
• pp.17-25
• /
• 2004

DMT 시험은 연약지반의 공학적 특성을 파악하기 위한 현장 시험방법으로, 이 방법으로부터 구한 비배수 전단강도는 가장 신뢰성 있고 유용한 매개변수로 알려져 있다. 그러나 국외 다른 지역의 자료를 토대로 기존에 제안된 상관관계식들은 지역적인 특성에 의존한다. DMT 시험 결과는 3가지 중간 지수 - 재료지수, 수평응력지수, dilatometer modulus를 사용하여 해석이 이루어지며 특히 비배수 전단강도는 수평응력지수만을 이용하여 예측하고 있다. 본 논문에서는 먼저 DMT 시험의 국내 연약지반에서의 적용성을 살펴보았으며 DMT로부터 비배수 전단강도를 추정하기 위하여 $p_0, p_1, p_2, {\sigma '}_v$ 그리고 초기 간극수압을 바탕으로 인공신경망 모델을 개발하였다. 인공신경망 모델은 오차 역전파 알고리즘을 적용하였으며 국내 연약지반에서 수행된 DMT 시험 자료를 이용하여 훈련하였다. 인공신경망 모델의 적용성을 판단하기 위하여 훈련에 이용되지 않은 자료로부터 예측된 결과와 기존에 제안된 상관관계식으로부터 얻은 결과를 서로 비교하였다.

• 대한정형도수물리치료학회지
• /
• 제10권1호
• /
• pp.103-116
• /
• 2004

The purpose of this study was to investigate between low back pain scale and disability index owing to gait pattern. For the period of February 1 to February 29, 2004, we had conducted a questionnaire and direct interview with 100 persons lived in Daejeon. The result were as follows: 1. The stride length of experimental group. the male was $49.9{\pm}12.9cm$. the female $45.7{\pm}12.9cm$ and the width of feet, the male was $13.5{\pm}5.7cm$, the female $12.2{\pm}4.8cm$. 2. The Fick angle of all subjects was showed in external disposition, the left angle showed in asymmetry, the male was $11.0{\pm}5.7^{\circ}$, the female $8.5{\pm}1.3^{\circ}$. 3. The foot arch was similar to sex as a weight bearing and non-weight bearing, the male was $1.3{\pm}0.8cm$, the female $1.3{\pm}0.9cm$. 4. The impedimental index according to back pain grade, men was a lower than women, the male was $5.7{\pm}6.9$ and the female $7.2{\pm}5.3$. 5. The relation to difference between foot arch and disability index according to back pain grade as a weight bearing and non-weight bearing, the higher foot arch, the higher back pain grade was statistically significance(p<.05). 6. The relation between width of feet and disability index according to back pain grade, the wider width of feet, the higher back pain grade was statistically significance(p<.01). 7. The relation between stride length and disability index according to back pain grade, the wider stride length, the higher back pain grade was statistically significance(p<.05).

• 대한인간공학회지
• /
• 제28권2호
• /
• pp.35-55
• /
• 2009

The purpose of this study was to analyze the somatotypes of women in the early 20's, which were likely to deform due to bad posture in growth period. Accordingly, bodies of women aged 20 to 24, whose growth stopped, were measured directly and indirectly, and factors related to body shapes were extracted, body shapes were categorized based on the data, and the characteristics of each body shape were analyzed. As a result, 10 factors related to body shapes were extracted in the factor analysis, and body shapes were categorized into 6 types. Type 1 was the volume of body that was big and the longest; and the general frame was large. The straight body shape with small back protrusion; the shoulder is relatively thick and the width of the shoulder was normal. Type 2 was the volume of body that was the biggest and the upper body was the longest; the general frame was of average height. The forward body shape with the back flat; the shoulder was very thick, wide, and serious leaning forward. Type 3 was a body that was thin and the shortest. The sway-back body shape with big curvature at the back; the shoulder was thin, narrow, and straight. Type 4 was a body that was short stature, and the general frame was of average build. The forward body shape with the most serious back protrusion; the shoulder was normally thick, narrow, and straight. Type 5 was a group with small body, and the lower body and general frame are long. The sway-back body shape with protrusion at the upper shoulder and the sides leaning backward; the shoulder was thin, wide, and leaning forward. Type 6 was a thin and short body; and the general frame was small. The lean-back body shape with the smallest back protrusion and leaning backward; the shoulder was thin, narrow, and leaning backward. Characteristics of the classified body shapes can be used in producing ready-made clothes, and it is hoped that there will be follow-up studies on clothing pattern design and production based on this result.

• 대한가정학회지
• /
• 제35권4호
• /
• pp.79-94
• /
• 1997

This study was performed to develop a basic stacks pattern for middle-aged women reflecting the characteristics of their lower body types. Anthropometric measurements using sliding guage method were carried out for 4 women 40's For the analysis of the lower body types horizontal and vertical section maps obtained by sliding gauge method and 2 indices were produced. Based on the slacks construction components produced by the drafts of their lower body surface experimental slacks pattern was designed. Multiple comparison test was used to compare 3 existing slacks patterns with the experimental pattern. 1. The results of the body section map analysis were as follows: 1) In the frontal view silhouette of vertical section maps there were less individual differences in items with skeleton landmarks than those without them. 2) In the shape of horizontal section maps waist section represented more round shape than the others and thigh maximum width section had the flattest shape. Flat ratios(depth/width) of subjects were much higer than those of young women which clarified the change of depth was bigger than that of width with aging process. 2. The slacks construction components for pattern drafting were as follows: 1)Ease amount of waist was 0.5cm and front and back waist girth difference was 1.2cm Ease amount of hip was 1,8cm and front and back hip girth difference was 0.7 cm 2) The amount of dart intake incresed in the order of side(4cm) back(3,6cm) from (2.8cm) The length of dart leg incresed in the order of front side back.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.154-161
• /
• 2004

The flat dilatometer test(DMT) is a geotechnical tool to estimate in-situ properties of various types of ground materials. The undrained shear strength is known to be the most reliable and useful parameter obtained by DMT. However, the existing relationships which were established for other local deposits depend on the regional geotechnical characteristics. In addition, the flat dilatometer test results have been interpreted using three intermediate indicesmaterial index($I_p$), horizontal stres index($K_p$), and dilatometer modulus($E_p$) and the undrained shear strength is estimated only by using the horizontal stress index($K_D$). In this paper, an artificial neural network was developed to evaluate the undrained shear strength by DMT and the ANN, based on the $p_0,\;p_1,\;p_2,\;{\sigma}'_v_0$, and porewater pressure. The ANN which adopts the back-propagation algorithm was trained based on the DMT data obtained from Korean soft clay. To investigate the feasibility of ANN model, the prediction results obtained from data which were not used to train the ANN and those obtained from existing relationships were compared.

• 한국의류학회지
• /
• 제27권8호
• /
• pp.946-957
• /
• 2003

This study aimed to suggest a simple and well-fitting flat pattern drafting method for a men's jacket. Four jackets in thick muslin were made from four different drafting methods utilizing a few measures as breast girth, center back length, and chest width, which were not much different from the drafting methods of woman's jacket. The appearance of the 4 jackets was evaluated by a pool of evaluators consisted of graduate students who had much clothing construction teaching experiences and their motion adaptability was evaluated by two wearers who belonged within the range of the average measures of the Korean male figure as reported from the 1997's Census for Standard Body Measure. A drafting method evaluated as the most well-fitting and well-functioning in general was chosen and modified to enhance the appearance and was reevaluated to confirm its fit improvement. As a result of this study, a new drafting method, simple and not much different from that of a woman's jacket pattern drafting method is proposed. Since this method is based on the minimal measures and ratios thereof, and is not as complicated as ordinary drafting methods for men's wear, the researcher expects that this drafting method allows more chances for the students to learn and understand men's wear more easily and comfortably.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.687-690
• /
• 2009

It has been recently reported that nano-sized MgO single crystal powders emit ultraviolet by stimulation of electrons under vacuum condition. Therefore, in this study, nano-crystalline MgO powders were applied to a xenon plasma flat fluorescent lamp for LCD backlight to improve emission efficiency of the lamp by help of extra ultraviolet from nano-MgO. For comparison with nano-crystalline MgO powders, MgO nano-thin film was applied directly on phosphors inside a lamp panel through e-beam evaporation The luminance and efficiency of FFL with an addition of MgO nano-crystal powders on phosphors were improved by around 20%. Application of MgO thin film to phosphors worsened the emission characteristics of FFLs, even rather than FFL without MgO. The reason came from insufficient stimulation of phosphors by UV, crystallinity of MgO, and low secondary electron coefficient.

• 전기학회논문지
• /
• 제57권6호
• /
• pp.966-971
• /
• 2008

Free-piston engine system is a new type energy converter which uses a linear motion of piston by using linear generator. In free-piston engine system, the piston is not connected to a crank-shaft. The major advantages of free-piston engine system are high efficiency and low mechanical loss from the absence of motion conversion devices. Linear generator of free-piston engine system is used as generator and starting motor. In design step, considering of back-emf and detent force characteristics for generating mode and thrust and control characteristics for starting mode is needed. In this research, generating mode of flat-type linear generator and tubular-type linear generator is analyzed by finite element analysis method and starting mode of both type linear generators is analyzed by using capability curve. Capability curve is plotted from electrical parameters of both type linear generator and motion profile is calculated from mechanical parameters.