• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.37-38
• /
• 2023

The purpose of this study is to manufacture mortars incorporating oyster shells and install them in the form of shaped, shaped butt joints, and flat boards to see what difference there is in the back temperature depending on the joint method and the type of installation. Based on the fact that similar backside temperatures were measured regardless of the presence or absence of a joint It is judged that the joint will not affect the backside temperature if it is constructed closely, In the case of ㄱ shaped, it is believed that the backside temperature higher than the backside temperature of the flat board was measured because heat accumulates on the backside during heating.

• 복식
• /
• 제50권5호
• /
• pp.117-130
• /
• 2000

The purpose of this thesis is to offer basic data for clothing design which is intended to apply appropriate shape and capacity to clothes. The following are the analyzed results of an investigation which was conducted to characterize the upper half of the female body of 193 women whose ages are 18 to 25, taking part in this investigation. According to the results of analyzing young women's bust, I came to find a large individual difference of the wide varying factor numbers at the items of the side feature, the body stance, and the dart quantity. For the analysis of the female's upper body, 11 factors are used. The are as follows: Factor 1. width of the bust Factor 2. height of the bust and length of the arm Factor 3. side thickness of the bust and the upside type Factor 4. length of the bust on the front Factor 5. length of the bust on the back Factor 6. salient ratio of the breast Factor 7. width of the neck. the armhole, and measurement of the droop Factor 8. length of the shoulder Factor 9. flat ratio of the bust Factor 10. inclination of the shoulder factor 11. form of the back The shape of young women's upper bodies can be divided into four groups. The character ization of each group are as follows : Group 1 . 28.5% of the women who take part in this investigation belong to Group 1 These women have the shortest body, with a longer length of the front than the back and more thickness on the front than the back. Group 2. 21.1% of the women who take part in this investigation belong to this group. They show a longer length of the back and more thickness of the back than the front. In addition, this group is bent forward. Group 3. This group is the mast common type, showing the shortest and thickest character. 37.8% of the women who take part in this investigation have this bust character Group 4. 12.4% of the women belong to Group 4. They possess the highest and fattest character, skewing smaller necks, armholes, and waists than the other groups. This group also shows the drooping shoulders.

• 한국광학회지
• /
• 제18권6호
• /
• pp.401-409
• /
• 2007

액정 디스플레이에 사용하는 직하형 Back Light Unit(BLU)의 확산판과 프리즘판의 개수를 줄이면서도 성능을 개선한 새로운 일체형 복합필름을 제안하고 이들의 광학적 성능을 시뮬레이션으로 분석하였다. 막대 프리즘의 형태와 원통 렌즈 형태를 하나로 합친 복잡한 일차원 형태의 광학프리즘을 만든 후, 이를 연속적으로 배열하여 일체형 복합필름을 구성하였다. 일체형 복합필름의 성능은 조명계 프로그램으로 확인하여 최적의 구조를 정하였다. 이러한 최적 조건하에서 한 장의 일체형 복합필름을 사용하는 10인치 크기의 BLU에서 계산한 광효율은 53.5%이고, 광휘도 균일도는 83.5%였으며, 각도별 광휘도 분포인 배광곡선은 수직으로 $90^{\circ}$이고 수평방향으로 $112.5^{\circ}$이다. 그리고 이러한 설계로 새로운 일체형 복합필름을 제작하였다.

• 복식문화연구
• /
• 제21권5호
• /
• pp.708-725
• /
• 2013

In the 2010s, skinny jeans were trendy, and they became a must-have for young women. The styles, clothing pressure and buying behavior of skinny jeans have been studied, but the patternmaking of skinny jeans has not been researched yet. To analyze skinny jeans patterns, we grouped skinny jeans into nine brands. They were sorted into three groups: special jeans brand, trendy jeans brand, and SPA brand. This study compared skinny jeans' sizing systems, product dimensions and pattern measurements in three brand groups. The appearance and fit of skinny jeans were evaluated by random groups of people in their 20s and 30s. The sizing systems for skinny jeans were different with KS K0051, and they were shown waist girth in inches. The waist and hip circumferences were different among brand groups. In product dimensions, trendy jeans brands had a shorter crotch length, a lower crotch depth, a narrower back crotch width, and a longer inseam than the others. The measurements of skinny jeans flat patterns were significantly different in as below; front crotch depth, front crotch height, front crotch length, back crotch extension, gap between back and front crotch depth, back crotch height, back crotch length, and center back angle. In the sensory survey results, trendy jeans brands were evaluated well in the fit of the waist line, hip line, crotch line, midthigh line, outseam, inseam, side waist line, crotch length and overall fit.

• 전기학회논문지
• /
• 제56권11호
• /
• pp.1930-1936
• /
• 2007

According to previously published paper the phase advance angle is adopted to the BLDC motor drive with high speed. The report proposed describes the optimum algorism that phase current is in phase with the initial flat region of back EMF. This report studies the need of more leading phase advance angle compared with in phase concept between phase current and back EMF. In case of high reactance this report proposes the more phase advance angle than in phase. The test results more rms value of phase current and output power due to more phase advance angle than in phase. It will be helped the high power operation of BLDC motor at high speed.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권4호
• /
• pp.161-164
• /
• 2006

In this thesis we designed the vision system to inspect the defect of a back light unit of plat panel display device. The vision system is divided into hardware and inspection algorithm of defect. Hardware components consist of illumination part, robot-arm controller part and image-acquisition part. Illumination part is made of acrylic panel for light diffusion and five 36W FPL's(Fluorescent Parallel Lamp) and electronic ballast with low frequency harmonics. The CCD(Charge-Coupled Device) camera of image-acquisition part is able to acquire the bright image by the light coming from lamp. The image-acquisition part is composed of CCD camera and frame grabber. The robot-arm controller part has a role to let the CCD camera move to the desired position. To take inspections of surface images of a flat panel display it can be controlled and located every nook and comer. Images obtained by robot-arm and image-acquisition board are saved on the hard-disk through windows programming and are tested whether there are defects by using the image processing algorithms.

• 복식문화연구
• /
• 제7권6호
• /
• pp.140-158
• /
• 1999

The purposes of this study are to examine the characters of the lower body shape in the middle aged women and to make slacks pattern on the base of four difference body shapes. The lower body shapes were classified into 4 types on the basis of their lateral view silhouettes. The slacks patterns were based on the lower body shape characters and resulted in followings. In “Type 1” of the right body shape with the standard protrusion of abdomen and hips, little difference from conventional patterns was seen in experiment pattern, in which the front waist girth was W/4+0.5㎝+0.5㎝+fold(2.5㎝) and the back waist girth W/4+0.5㎝-0.5㎝+dart(3.5㎝). The front hip girth was defined as H/4+2.0㎝+0.5㎝ and the back hip girth as H/4+2.0㎝-0.5㎝ due to its increased ease amount produced by abdominal fat deposition. In the experimental pattern of “Type 2” with prominent hips, the front and back differences of the waist girth and the hip girth and the hip girth were defined as 1.0㎝ and 2.0㎝ separately. Accordingly, the front waist girth was W/4+0.5㎝+1.0㎝+fold(2.0㎝), the back waist girth W/4+0.5㎝-0.1㎝+dart(6.5㎝), the front hip girth H/4+2.0㎝+1.0㎝ and the back hip girth H/4+2.0㎝-1.0㎝. In “Type 3” with the prominent abdomen and the flat hips, the front waist girth was set up as W/4+0.5㎝+0.5㎝+fold(4.5㎝) for the increased front fold amount and the back waist girth was W/4+0.5㎝+0.5㎝+dart(3.0㎝). The front hip girth was made as H/4+2.5㎝+0.5㎝ and the back hip girth H/4+2.5㎝-0.5㎝. In “Type 4” with prominent abdomen and hips, considered were ① the increased front fold amount due to the abdominal protrusion, ② the increased back dart amount and the decreased back dart length owing to the hips prominent and ③ the front and back differences of waist and hip girth for the lateral view silhouette. Therefore the front waist girth was defined as W/4+0.5㎝+2.0㎝+fold(5.0㎝), the back waist girth as W/4+0.5㎝-2.0㎝+dart(4.0㎝), the front hip girth as H/4+2.0㎝+1.0㎝ and the back hip girth as H/4+2.0㎝-1.0㎝. The sensory evaluation of appearance and comfort was appeared more suitable on the experiment pattern than on the conventional pattern.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.1-4
• /
• 2008

플랫 플레이트 구조는 다른 구조형식에 비하여 매우 경제적인 구조형식이다. 그러나 횡하중을 받는 플랫 플레이트 구조는 슬래브-기둥 접합부의 뚫림전단파괴에 대해 취약하다. 플랫 플레이트 구조의 외부접합부는 편심전단에 대해 비대칭형의 위험단면을 가지고 있으며, 위험단면의 길이가 내부접합부 보다 작고 중력하중과 횡하중 모두에 의해 편심전다응력이 발생하게 되므로 뚫림전단파괴에 대해 매우 취약하다. 이에 본 논문에서는 플랫 플레이트 외부접합부의 실험결과와 기존 데이터를 바탕으로 ACI 318-05와 CEB-FIP MC 90의 설계기준식을 비교한 결과 편심전단응력, 불균형모멘트에 대해서 CEB-FIP식이 더 정확했고 형상비의 영향은 기둥 형상비가 큰 경우에는 기준식의 적용성에 문제가 있는 것으로 나타났다. 중력전단력비의 영향은 기준식의 제안을 만족하였으나 설계 기준에서는 단순히 중력전단비만 고려하고 있어서 다른 설계조건 변화에 따른 차이를 고려할 필요가 있다.

• KIEAE Journal
• /
• 제15권3호
• /
• pp.37-42
• /
• 2015

Purpose: Apartment is a typical residential type in Korea. In the past, apartment types were very monotonous. But today, the types of complex are changed because personal needs have been diversified and personalized. In order to meet those needs, construction companies are constructing various types of apartments. The more apartment types are diverse, the more the energy problems are taken place. So, the purpose of this study is to solve the problem of energy gap in the same complex through improving the thermal transmittance of wall. Method: Heating energy consumption of Building Energy Efficiency Rating System and heating energy usage of apartment show a similar trend on the graph. In order to identify the best position of heating energy consumption difference reduction, we change the building's U-value of front, back, side walls. Result: In the A complex, maximum and minimum heating energy consumption building's shapes are flat. the best efficiency is side U-value change and the worst is front change. In the E complex, maximum heating energy consumption building's shape is tower and minimum building shape is flat. Consequently, the front and back wall performance change was little effect to reduce energy gap, while the change of side wall's U-value show the great reduction between building's energy consumptions.

• Journal of Welding and Joining
• /
• 제29권3호
• /
• pp.51-57
• /
• 2011

Bead shape control with gas force process has been developed to overcome the concave back bead in pipe orbital welding. However, It is impossible to make a convex back bead using the existing gas nozzle, because it has high gas-consuming and low gas force. The purpose of this paper, to develop optimum shape of nozzle which to reduce the consumption of gas, maximizing the shield gas force with low cost and high productivity coincide the Green welding. In this paper venturi-type nozzle was designed by using the Venturi meter and compared velocity, pressure, arc shape in the flat position with existing CP-nozzle. As a result, Venturi-type nozzle's maximum velocity and pressure was improved at the same flow rate. Also heat input was increased by the arc contraction in the flat position.