• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.6
• /
• pp.783-792
• /
• 2005

The purpose of this research is to develop appropriate Insole according to foot characteristics of female adults. This research concentrates on proving the effectiveness of Insole on resolving foot discomforts by analyzing the differences between the fitting and foot pressure before and after wearing Insole. Among 216 female testers of previous research, six testers wear selected and placed into six different groups classified according to foot discomforts and foot characteristics. After wearing Insole, the results indicates that the entire groups represented the improvement of fitting and the mitigation of foot discomfort. The results of foot pressure experiment shows that the maximum pressure of foot spreads out evenly after wearing Insole, which indicates the effectiveness of Insole. This efficacy works particularly well for foot testers of second and sixth group. The results indicate that group 6, which consist of the flat-footed and the old, have more noticeable effects derived from Insole, whereas group 3 and 5 do not, due to its constitution of people with fairly normal feet. Furthermore, it was evident that maximum pressure played a major role in proving the beneficial effects of Insole, one of which is to scatter the maximum pressure of heel away and lessen the foot pressure of plantar.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.4 s.71
• /
• pp.43-49
• /
• 2006

Detailed investigations were carried out on the stability of the dredged soil bed against wave actions, aimedat establishing the design method of artificial tidal flats using dredged soil. The soil was dredged at Nagoya port, Japan, and has a mean grain size of 0.013mm. Basic features of artificial dredged soil bed against wave actions were explained from a series of model experiments in a wave flume. The two types of section shapes were employed; one is a horizontal bed and the other is a sloped one. Changes of the bed profile, shear strength, grain size distribution and water content, according to the wave actions, were measured in detail. The cumulative effect of the wave actions, over about one week, was investigated. A dredged soil bed moves withthe wave actions with relatively small wave height. It should be especially. noted that the clay component is dissolved and flown out, away from the surface layer, and consequently the surface layer hardens, as if it is covered with sand. Wren the wave height is gradually increased, the bed is not liquefied and the shear strength of the dredged bed is increased by a wave-induced dissipation of pore pressures in the bed and a decrease of clay component by the wave-induced leakage.

• The Journal of Korea Robotics Society
• /
• v.5 no.2
• /
• pp.110-119
• /
• 2010

This paper aims to add the autonomous driving capability to the inverted pendulum system which maintains the inverted pendulum upright stably. For the autonomous driving from the starting position to the goal position, the motion control algorithm is proposed based on the dynamics of the inverted pendulum robot. To derive the dynamic model of the inverted pendulum robot, a three dimensional robot coordinate is defined and the velocity jacobian is newly derived. With the analysis of the wheel rolling motion, the dynamics of inverted pendulum robot are derived and used for the motion control algorithm. To maintain the balance of the inverted pendulum, the autonomous driving strategy is derived step by step considering the acceleration, constant velocity and deceleration states simultaneously. The driving experiments of inverted pendulum robot are performed while maintaining the balance of the inverted pendulum. For reading the positions of the inverted pendulum and wheels, only the encoders are utilized to make the system cheap and reliable. Even though the derived dynamics works for the slanted surface, the experiments are carried out in the standardized flat ground using the inverted pendulum robot in this paper. The experimental data for the wheel rolling and inverted pendulum motions are demonstrated for the straight line motion from a start position to the goal position.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.6
• /
• pp.14-21
• /
• 2004

This automotive headlight control system is newly proposed that, under my slope degree of the driving mad(flat up-hill, and down-hill) at night driving, the reflecting mirror of the headlight can be automatically controlled for safe driving. At first whether or not any vehicle is driven near is checked by photo sensor. Secondly, using the slope degree of the automotive feedbacked from the tilt sensor, the servo motor with the headlight is controlled to be turned right or down to the suitable angle. The servo motor is appropriately controlled according to road conditions. The proposed headlight control system is designed on the basis of the tested illumination intensity obtained according to any slope degree of roads. Finally, it is confirmed that the test model works very well in the given road conditions and environments.

• Journal of Korean Society of Rural Planning
• /
• v.9 no.3 s.20
• /
• pp.25-34
• /
• 2003

This study was carried out to propose some useful advices for the improvement policy of the minor rural roads. For the detailed case studies on structural improvement level of the minor rural roads, 5 county areas in Chonnam Province were selected ; Damyang (peri-urban), Gurye(remoter mountainous), Jindo(remotest island), Yuongam(intermediate flat) and Bosung (intermediate semi-mountainous). In each county, the official survey data on pavement types, widths and ratios of district(Myun in Korean) and parish(Ri in Korean) roads were collected. There were no apparent differences between district and parish roads in terms of structural improvement level, while the former was ranked higher than the latter in the minor rural road improvement law, so, the present hierarchial classification system of rural roads should be readjusted. And above a third of minor rural roads in the case study areas did not meet the statutory minimum level of road width, which means the necessity of substantial upgrade of road improvement works in rural areas.

• Journal of radiological science and technology
• /
• v.44 no.4
• /
• pp.375-380
• /
• 2021

This study aim was quantitative assessment of MTFs of spectrum of the square wave chart images and Coltman chart images for 0°, 1.7°, 2.2°, 2.9°, 4.1° by using chart method. In general device was AccuRay-650 (DK Medical System, Korea) used, indirect flat panel detector(FPD) Aero (Konica, Japan) used and MATLAB R2019a (MathWorks, USA) used. The result of comparison for each angle of MTF the edge image was highest quantitatively value for MTF finding of showed the best value of 0.1 based on the frequency of 3.5 mm^-1, value of 0.1 based on the square wave was frequency of 3.0 mm^-1 and value of 0.1 based on the Coltman transform was frequency of 2.4 mm^-1. In this study it was significant that the methodology of the international Electro-technical Commission was applied mutandis by using the Fujita method within 2~3°.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.3
• /
• pp.280-291
• /
• 2013

This paper analyzes desirable breast types using measurements from 31 selected female subjects based on the ratio of breast in works of art and to design a brassiere cup design according to the breast type of 182 female subjects in their 20s. The subjects selected for this paper are somewhat larger than a previous study on aesthetically perfect breasts of foreigners according to chest breadth, center neck point to breast point, breast circumference, and breast volume. However, the aesthetic breasts of foreigners are larger than the subjects selected for this study according to chest depth, under-bust circumference, and bust point to bust point. Comparing various breasts types and aesthetic breasts, padding is necessary to complement the form of flat breasts to increase the volume and diameter. Brassiere cups for cone-shaped breasts should be designed to increase breast volume through an increase in nipple height. Hemisphere breasts should be designed to increase the overall volume-leaving diameter. Protrusion breasts should enhance the functions of aggregating and supporting without any increase or decrease of the breast volume. Drooping breasts require the ability to support a large volume to stabilize the breast. Subjects were selected depending on the ratio of breast silhouette as works of art and who have large breasts in disproportional to a slender trunk. Three items, the circumferential length of breast, height of the nipple, and the depth of inner breast using the anthropomorphic measurements of 182 subjects were measured through regression equations for breast volume. Breast volume = -394.86 + 27.52 ${\times}$ (the circumferential length of breast) + 18.73 ${\times}$ (height of the nipple) + 12.85 ${\times}$ (the depth of inner breast). Regression equations to extract the aesthetic breast volume in measurements irrelevant to breasts using the anthropomorphic measurements of 31 subjects were as follows. Aesthetic breast volume = -611.30 + 17.67 ${\times}$ (bust circumference) -24.29 ${\times}$ (under-bust circumference) + 16.31 ${\times}$ (neck point to breast point to waistline) + 22.83 ${\times}$ (bust breadth) + 12.22 ${\times}$ (waist depth) -8.34 ${\times}$ (interscye- front). This prediction equation is useful to develop a breast type brassiere pattern, complement breast enhancement surgery, or minimize the effect a mastectomy.

• Cartoon and Animation Studies
• /
• s.33
• /
• pp.31-53
• /
• 2013

In the early twentieth century, history of animation began by modern artists, they produced various experimental images with the newly invented film and cameras. Artists in the field of movie, photography, paintings and others manipulated images in motion. But as some animated movies won industrial success and popularity, they became the trend but experimental style of early animation preserved by so-called non-mainstreamers or experimental animators, counteracting commercialism. Disney animation also followed the trend by applying realistic Hollywood film style, the worse critics placed a low value on the animation and it tarnished the image, although it was profitable investment from a business standpoint. To make images realistic, they opened a drawing class that animators developed skills to imitate motions and forms from subjects in real life. Also some techniques and gizmos were used to mimic and simulate three dimensional objects and spaces, multiplane camera and compositing 3D CG images with 2D drawings. Moreover, they brought animation stories from fairly tales or folk tales, and Walt's personal interest in live-action movies, they applied Hollywood-film-like narratives and realistic visual, and harsh criticism ensued. On the surface early disney animations' potential seems to be weakened, but in reality it still exists by simplifying and exaggerating forms and color as modern arts. Disney animation employs concepts of the modernism paintings such as simplified shapes and colors to a character design, when their characters are placed together in a scene, that visual elements cause mental reaction. This modification gives a new internal experience to audiences. As conceptual colors in abstract paintings make images appeared to be flat, coloring characters with no shading make them look flat and comparing to them, background images are also appeared to be flat. On top of that, multi-perspective at background images recalls modernist paintings. This essay goes in details with the animation pioneers' works and how Disney animation developed its techniques to emulate real life and analyses color schemes, forms, and spaces in Disney animation compared with modern artists' works, in that the visual language of Disney animation reminds of impression from abstract paintings in the beginning of the twentieth centuries.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.4
• /
• pp.271-279
• /
• 2016

The objective of this study was to determine the effect of the moisture content and pellet mill type on the physical and chemical characteristics of Italian ryegrass (IRG) pellet. Moisture content of raw material significantly (p<0.05) affected IRG pellet formation. Moisture content at 25% was the best condition for IRG pellet formation in terms of shape, power load and temperature changes. The hardness of pellet was decreased when moisture content was increase. However, the hardness of pellet was not affected by pellet mill type. Moisture content at 30% dramatically (p<0.05) decreased the durability compared to moisture content at 25%. Dry matter content of IRG pellet was increased (p<0.05) after pelleting. Total count of microorganism was decreased in pellet due to pressure heat and moisture losses during the pelleting process. These results indicated that the proper moisture content of Italian ryegrass pelleting would be at 25%. In addition, Roll & flat die type would be more suitable than Ring die and Die & flat die type in IRG pelleting. Pelleting works would be beneficial for improving forage quality and long storage.

• Cartoon and Animation Studies
• /
• s.46
• /
• pp.207-231
• /
• 2017

Printmaking is a field of fine arts and is placed on a vague boundary that is perceived as a commercial product with a popular character due to the speciality of editions. Advances of modern science and technology has developed a new technique of printmaking, and the fusion of printmaking and computer has shown the possibility of reproduction art. Reproduction printmaking has been heavily influenced by photography and extended areas, and the various forms of printing have brought about many changes and attempts by stimulating the possibilities of indirect art at various angles. As the history of printmaking and technology closely relate, the development of computer makes widespread expansion of plural artistry, technological and artistic change. A new conceptual shape can be created on the copied image simply by placing the material of the print on the smoothly flat surface expressed in digital form. The process and the result of such work show the area of unique work which is different from the value of the $\grave{a}$ la carte art or the characteristics of the material given by the print. The deprecated perception of reproducibility evaluated the value of the work in a direct sense of printmaking. It is undeniable that it is devalued by a bundle of works regardless of the value of each edition. However, the physical properties of the prints on the paper are brought up with hand drawings drawn on the canvas by hand. And it becomes an opportunity to show new aspect and change through the process of combining digital print information on paper. The diversity of media is sometimes a controversy of identity between art and technology. In the future, it should be discussed how the limit of the media which can be enjoyed in the field of art can be set as a standard.