Tuncdemir, Ali Riza;Karahan, Ismail;Polat, Serdar;Malkoc, Meral Arslan;Dalkiz, Mehmet
The Journal of Advanced Prosthodontics
/
제5권1호
/
pp.44-50
/
2013
PURPOSE. The aim of this study was to evaluate the effects of repeated porcelain firing process on the corrosion rates of the dental alloys. MATERIALS AND METHODS. Cr-Co, Cr-Ni and Pd-Ag alloys were used for this study. Each metal supported porcelain consisted of 30 specimens of 10 for 7, 9 and 11 firing each. Disc-shaped specimens 10 mm diameter and 3 mm thickness were formed by melting alloys with a propane-oxygen flame and casted with a centrifuge casting machine and then with the porcelain veneer fired onto the metal alloys. Corrosion tests were performed in quintuplicate for each alloy (after repeated porcelain firing) in Fusayama artificial saliva solution (pH = 5) in a low thermal-expansion borosilicate glass cell. Tamhane and Sheffe test was used to compare corrosion differences in the results after repeated firings and among 7, 9 and 11 firing for each alloy. The probability level for statistical significance was set at ${\alpha}$=0.05. RESULTS. The corrosion resistance was higher (30 mV), in case of 7 times firing (Commercial). On the other hand, it was lower in case of 11 times firing (5 mV) (P<.05). Conclusion. Repeated firings decreased corrosion resistance of Pd-Ag, Cr-Co and Cr-Ni alloys. The Pd-Ag alloy exhibited little corrosion in in vitro tests. The Cr-Ni alloy exhibited higher corrosion resistance than Cr-Co alloys in in vitro tests.
화석 연료의 연소 과정에서 발생하는 그을음 입자의 형상은 작은 구형입자들이 군집체를 이루고 있는 프랙탈 형상을 하고 있기에 기존 Rayleigh나 Mie 탄성 광 산란 이론으로 분석하는 것에는 한계가 있다. 본 논문에서는 Rayleigh-Debye Gans(RDG) 산란 이론을 적용하여 프랙탈 차원을 가지는 미세 입자의 형상을 효과적으로 해석할 수 있는 과정을 자세히 묘사하였다. 이소옥탄 확산 화염에서 발생하는 그을음 입자를 열 영동 채취법을 이용하여 채집한 후, 투과전자현미경을 이용하여 그을음 입자의 형상을 관찰하였다. RDG 산란 이론을 적용하여, 그을음 입자의 프랙탈 형상을 조사 하였고, 그을음 개별 입자의 직경, 입자 수밀도 및 부피 분율을 산출하였다. 이러한 결과들은 그을음의 성장 과정에서는 뚜렷한 증감 경향을 보이진 않았으나, 그을음 산화 과정에선 전부 뚜렷하게 감소하는 경향을 보였다. 본 연구에서 RDG 산란 이론을 이용하여 도출한 그을음 군칩체의 프랙탈 차원은 약 1.82로 이는 기존의 유사연구 결과와 동일하며, 화석연료의 종류에 상관없이 생성된 모든 그을음 입자에 동일한 값을 갖는 것으로 사료된다.
The A60 class deck penetration piece is a fire-resistance apparatus installed on the deck compartment to protect lives and to prevent flame diffusion in the case of a fire accident in a ship or offshore plant. In this study, the sensitivity of the fire-resistance performance and approximation characteristics for the A60 class penetration piece was evaluated by conducting a transient heat-transfer analysis and fire test. The transient heat-transfer analysis was conducted to evaluate the fire-resistance design of the A60 class deck penetration piece, and the analysis results were verified via the fire test. The penetration-piece length, diameter, material type, and insulation density were used as the design factors (DFs), and the output responses were the weight, temperature, cost, and productivity. The quantitative effects of each DF on the output responses were evaluated using the design-of-experiments method. Additionally, an optimum design case was identified to minimize the weight of the A60 class deck penetration piece while satisfying the allowable limits of the output responses. According to the design-of-experiments results, various approximate models, e.g., a Kriging model, the response surface method, and a radial basis function-based neural network (RBFN), were generated. The design-of-experiments results were verified by the approximation results. It was concluded that among the approximate models, the RBFN was able to explore the design space of the A60 class deck penetration piece with the highest accuracy.
A60 class bulkhead penetration piece is a fire resistance system installed on a bulkhead compartment to protect lives and to prevent flame diffusion in a fire accident on a ship and offshore plant. This study focuses on the approximate optimization of the fire resistance design of the A60 class bulkhead penetration piece using a multi-island genetic algorithm. Transient heat transfer analysis was performed to evaluate the fire resistance design of the A60 class bulkhead penetration piece. For approximate optimization, the bulkhead penetration piece length, diameter, material type, and insulation density were considered discrete design variables; moreover, temperature, cost, and productivity were considered constraint functions. The approximate optimum design problem based on the meta-model was formulated by determining the discrete design variables by minimizing the weight of the A60 class bulkhead penetration piece subject to the constraint functions. The meta-models used for the approximate optimization were the Kriging model, response surface method, and radial basis function-based neural network. The results from the approximate optimization were compared to the actual results of the analysis to determine approximate accuracy. We conclude that the radial basis function-based neural network among the meta-models used in the approximate optimization generates the most accurate optimum design results for the fire resistance design of the A60 class bulkhead penetration piece.
본 논문에서는 전달길이에 영향을 미치는 인자에 따라 프리텐션 부재가 받는 동적 충격에 의한 영향을 실험적으로 고찰하였다. 이를 위해 긴장재의 직경, 콘크리트의 피복 두께, 구속 철근과 비부착 구간의 유무, 긴장력 도입 방식을 변수로 한 10개의 프리텐션 콘크리트 부재를 제작하고, 긴장재에 부착한 전기 저항식 변형률 게이지를 통하여 부재에 긴장력 도입 시 변형률 변화를 동적으로 측정하였다. 실험 결과, 순간 전달 방식으로 긴장력을 도입할 때 절단단부에서 큰 동적 효과가 발생하는 것을 확인할 수 있었다. 또한, 변형률 변화량으로 각 부재의 긴장력을 비교한 결과, 각 인자에 따라 차이가 존재하는 것을 확인했다. 직경 15.2 mm 강선보다 12.7 mm 강선의 잔류 긴장력 비율이 더 컸으며, 75 mm의 콘크리트 피복 두께만으로도 충분한 구속 효과를 기대할 수 있는 것으로 판단된다. 구속 철근의 영향은 미미했고, 비부착 구간의 영향으로 잔류 긴장력이 향상되었다. 순간 전달 방식보다 지연 전달 방식으로 긴장력을 도입할 때 긴장력 손실이 적은 것으로 확인되었다.
본 연구는 하수슬러지 케이크와 타르, 피트모스를 혼합하여 연료 및 보조연료로써 활용이 기능하도록 안정된 발열랑을 가지는 혼합비를 도출하고, 제조된 고형연료의 연소특성과 대체연료로써의 RDF의 적용가능성을 확인하는데 목적이 있다. 각각의 개별 발열량은 하수슬러지 케이크와 피트모스가 4000~4500kcal/kg 비슷하였으며, 타르의 발열량은 7000kcal/kg로 가장 높은 것으로 나타났다. 또한, 발열량 6,000kcal/kg 이상으로 하는 적정 혼합비를 (하수슬러지케이크 : 타르 : 피트모스) 1 : 4 : 1에서 1: 7 : 1까지로 하여 길이 1.6cm, 직경 1.3cm, 중량 2.3g의 고형연료를 제조하였다. 제조된 고형연료의 RDF 적용가능성 분석결과, 배기가스 분석에서는 혼합비에 따라 발생되는 배기가스의 성분농도가 크게 변하지 않았으며, 고형연료의 불꽃 지속시간은 5분 내외로 동일 질량 2.3g을 연소시킨 일반 무연탄과 지속시간이 비슷한 것으로 나타났다. 따라서 본 연구에서 제조한 고형연료의 연료 및 보조연료로서의 활용이 기능할 것으로 판단된다.
유기단열재를 사용한 샌드위치패널(복합자재) 건축물 화재는 소화가 어려우며, 가연성 심재를 통한 빠른 화재 확산으로 화재 시 피해가 크다. 샌드위치패널은 양면이 불연재로 되어있고, 불연재 사이에 심재인 단열재로 이루어져 있다. 단열재는 유기단열재와 무기단열재가 사용되고 있으며, 유기단열재가 무기단열재에 비하여 약 80% 이상 사용되고 있다. 유기단열재는 무기단열재에 비하여 경제적인 장점이 있지만 화재에 취약하다는 단점을 가지고 있기 때문에 샌드위치패널 화재 시 일반화재에 비하여 피해가 크다. 가스유해성시험의 경우 복합자재의 심재 위험성을 측정하기 위해 패널에 지름 25 mm 크기 3개의 원형 천공을 하여 시험하지만 콘칼로리미터 시험은 샌드위치패널 형태 그대로 시험을 진행한다. 본 연구에서는 KS F ISO 5660-1 콘칼로리미터 시험에서 복합자재의 경우 불연재인 표면에 가열한 경우와 천공을 통한 심재 노출 시험 및 심재에 직접가열 시 발생하는 화재의 위험성을 측정하였다. 시험에 사용된 유기단열재는 일반 EPS와 난연 EPS를 사용하였으며, 시험체 구성은 샌드위치패널, 천공된 샌드위치 패널, 심재의 3가지 형태로 시험을 진행하였다. 본 연구의 목적은 콘칼로리미터 시험 시 복합자재 심재의 화재 위험성을 평가하는 방안을 제시하고자 하였다.
The purpose of this study was to investigate the dissolution components during corrosion of amalgams and to identify surface corrosion products in the modified Fusayama artificial saliva. Four type of amalgam alloys were used: low copper lathe cut amalgam alloy (Cavex 68), low copper spherical amalgam alloy (Caulk Spherical Alloy), high copper admixed amalgam alloy (Dispersalloy) and high copper single composition amalgam alloy (Tytin). Each amalgam alloy and Hg were triturated according to the manufacturer's direction by means of mechanical amalgamator (Capmaster, S.S.White), and then the triturated mass was inserted into the cylindrical metal mold which was 10mm in diameter and 2.0mm in height and condensed with compression of 150kg/$cm^2$ using oil pressor. The specimens were removed from the mold and stored at room temperature for 7 days and cleansed with distiled water for 30 minutes in an ultrasonic cleaner. The specimens were immersed in the modified Fusayama artificial saliva for the periods of 1 month, 3 months and 6 months. The amounts of Hg, Cu, Sn and Zn dissolved from each amalgam specimen immersed in the artificial saliva for the periods of 1 month, 3 months and 6 months were measured using Inductivity Coupled Plasma Atomic Emission Spectrometry (ICPQ-1000, Shimadzu, Japan) and amount of Ag dissolved from amalgam specimen was measured using Atomic Absorption Spectrophotometry (Atomic Absorption/Flame emission spectrophotometer M-670, Shimadzu, Japan). A surface corrosion products of specimens were analysed using Electron Spectroscopy Chemical Analyser (ESCA PHI-558, PERKIN ELMER, U.S.A.). The secondary image and back scattered image of corroded surface of specimens was observed under the SEM, and the corroded surface of specimens was analysed with the EDX. The following results were obtained. 1. The dissolution amount of Cu was the most in high copper admixed amalgam(Dispersalloy) and the least in high copper single composition amalgam(Tytin). 2. Sn and Zn were dissolved during all the experiment periods, and dissolution amounts were decreased as the time elapsed. 3. Initial surface corrosion products were ZnO and SnO. 4. Corrosion of ${\gamma}$ and ${\gamma}_2$ phase in low copper amalgams was observed and Ag-Cu eutectic alloy phase was corroded in low copper spherical amalgam(Caulk Sperical Alloy). 5. Corrosion of ${\gamma}$ and $\eta$' phase in high copper amalgams was observed and Ag-Cu eutectic alloy phase was corroded in high copper admixed amalgam(Dispersalloy). 6. Sn-Cl was produced in the subsurface of low copper amalgams and high copper admixed amalgam.
A60 급 갑판 관통 관은 선박과 해양플랜트에서 화재사고가 발생할 경우 화염의 확산을 방지하고 인명을 보호하기 위해 수평구조에 설치되는 방화장치이다. 본 연구에서는 다양한 대리모델과 다중 섬 유전자 알고리즘을 이용하여 A60 급 갑판 관통 관의 방화설계에 대한 이산변수 근사최적화를 수행하였다. A60 급 갑판 관통 관의 방화설계는 과도 열전달해석을 통해 평가하였다. 근사최적화에서 관통관의 길이, 지름, 재질, 그리고 단열재의 밀도는 이산설계변수로 적용하였고, 제한조건은 온도, 생산성 및 가격을 고려하였다. 대리모델 기반의 근사최적설계 문제는 제한조건을 만족하면서 A60 급 갑판 관통 관의 중량을 최소화할 수 있는 이산설계변수를 결정하도록 정식화하였다. 반응표면모델, 크리깅, 그리고 방사기저함수 신경망과 같은 다양한 대리모델이 근사최적화에 사용되었다. 근사최적화의 정확도를 검토하기 위해 최적해의 결과는 실제 계산 결과와 비교하였다. 근사최적화에 사용된 대리모델 중 방사기저함수 신경망 모델이 A60 급 갑판 관통 관의 방화설계에 대해 가장 정확한 최적설계 결과를 나타내었다.
A60급 갑판 관통 관은 선박과 해양플랜트의 화재 발생 시 인명의 보호와 화염전파를 방지하기 위해 갑판 구획에 설치되는 방화 장치이다. A60급 갑판 관통 관이 새로 개발되거나 기존의 설계가 변경될 경우 국제해사기구의 화재시험절차 규정에 따라 A60급 갑판 관통 관의 방화성능을 검증하도록 요구하고 있다. 따라서, 본 논문에서는 신규 개발된 선박과 해양플랜트용 A60급 갑판 관통 관의 방화 설계의 적합성을 평가하기 위해 과도 열전달 해석을 수행하였고, 화재시험을 통해 해석결과의 타당성을 검증하였다. 또한 A60급 갑판 관통 관의 열전달 특성은 관의 직경, 내부형상 그리고 재질과 같은 설계 사양에 따라 비교하여 검토하였다. 과도 열전달 해석은 범용 유한요소법 소프트웨어인 ABAQUS/Implicit를 사용하여 수행하였으며, 해석결과의 검증을 위한 화재시험은 해사안전위원회에서 규정한 화재시험절차 코드에 따라 수행하였다. 본 연구에서 검토한 A60급 갑판 관통 관의 방화성능은 국제 해상안전규정을 만족하였고, 재질 사양의 설계가 중요한 것으로 나타났다. 최대 시험온도를 기준으로 SUS316L 재질의 측정온도는 S45C 재질보다 평균적으로 25% 낮게 나타났고, 이때 각 재질의 열전도계수와 비열의 차이는 각각 17%와 58%였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.