Browse > Article
http://dx.doi.org/10.5762/KAIS.2021.22.4.1

Transient Heat Transfer Analysis and Fire Test for Evaluation on Fire Resistance Performance of A60 Class Deck Penetration Piece  

Park, Woo Chang (Department of Naval Architecture & Ocean Engineering, Mokpo National University)
Song, Chang Yong (Department of Naval Architecture & Ocean Engineering, Mokpo National University)
Publication Information
Journal of the Korea Academia-Industrial cooperation Society / v.22, no.4, 2021 , pp. 1-9 More about this Journal
Abstract
A60 class deck penetration piece is a fire-resistance apparatus installed on the deck compartment to protect lives and prevent flame diffusion in fire accidents. In case that the A60 piece is newly developed or its initial design is revised, it is important to verify the fire resistance performance using a fire test procedure (FTP) code. In this paper, transient heat transfer analysis was carried out to evaluate the fire resistance design compatibility of the newly devised A60 piece. The analysis results were verified via a fire test. The heat transfer characteristics were also investigated by comparing design specifications, such as diameter, internal configuration, and material type. The analysis was performed using ABAQUS/Implicit, and the fire test was performed according to the FTP code. The fire resistance performance of the A60 pieces satisfied the safety of life at sea convention regulation. The material type was the most important design specification for the A60 piece. Based on the maximum test temperature, the measured temperature of SUS316L material was 25% lower than that of S45C on average. The differences between thermal conductivity and specific heat of each material were 17% and 58%, respectively.
Keywords
A60 Class Deck Penetration Piece; Fire Test; FTP Code; Heat Transfer Characteristics; Transient Heat Transfer Analysis;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 IMO, International Convention for the Safety of Life at Sea, SOLAS 1999/2000 Amendment, UK, 2010.
2 MSC, Adoption of the International Code for Application of Fire Test Procedures. MSC.307(88), UK, 2010.
3 J. S. Yu, H. G. Sung, J. H. Oh, An experimental study on fire-resistant boom, Journal of the Korean Society of Marine Environmental Engineering, Vol.3, No.2, pp.25-32, 2000.
4 T. J. Choi, J. S. Kim, K. K. Choi, Y. S. Lim, Y. T. Kim, An experimental study on the fireproof of fire damper in accordance with insulation conditions on the coaming and blade, Journal of the Korean Society of Marine Engineering, Vol.37, No.4, pp.431-437, 2013. DOI: https://doi.org/10.5916/jkosme.2013.37.4.431   DOI
5 J. M. Choi, H. C. Um, Y. H. Jin, Comparison on the fire performance of additional insulation materials for improving the fire retardancy in engine-room of FRP vessel, Journal of the Korean Society of Marine Engineering, Vol. 38, No.9, pp.1150-1155, 2014. DOI: https://doi.org/10.5916/jkosme.2014.38.9.1150   DOI
6 Simulia, ABAQUS User Manual, Simulia, 2018.
7 C. J. Jang, N. S. Hur, I. W. Kim, Performance experiment of H-120 class fire damper for offshore, Journal of the Korean Society of Manufacturing Process Engineers, Vol.13, No.2, pp.131-136, 2014. DOI: https://doi.org/10.14775/ksmpe.2014.13.2.131   DOI
8 C. Y. Song, Y. Kim, Identification of fire resistance characteristics of bulkhead penetration pieces for A-0 class compartment, Journal of Advanced Marine Engineering and Technology, Vol. 44, No.6, pp.414-421, 2020. DOI: https://doi.org/10.5916/jamet.2020.44.6.414   DOI
9 ABS, Mobile Offshore Drilling Units - Fire and Safety, Rules for Building and Classing, USA, 2019.
10 G. Piscopo, E. Atzeni, A. Salmi, 2019, A hybrid modeling of the physics-driven evolution of material addition and track generation in laser powder directed energy deposition, Materials, Vol.12, No.17, pp.1-23, 2019. DOI: https://doi.org/10.3390/ma12172819   DOI
11 I. Magnabosco, P. Ferro, A. Tiziani, F. Bonollo, Induction heat treatment of a ISO C45 steel bar: experimental and numerical analysis, Computational Materials Science, Vol.35, No.2, pp.98-106, 2006. DOI: https://doi.org/10.1016/j.commatsci.2005.03.010   DOI
12 S. Suman, P. Biswas, P. Sridhar, Numerical prediction of welding distortion in submerged arc welded butt and fillet joints, International conference on Design and Manufacturing, 2016.
13 ISO, Fire Resistance Tests - Elements of Building Construction, ISO 834-1, Switzerland, 1999.
14 T. Ohmura, M. Tsuboi, M. Tsuboi, M. Onodera, Specific heat measurement of high temperature thermal insulations by drop calorimeter method, International Journal of Thermophysics, Vol.24, No.2, pp.559-575, 2003. DOI: https://doi.org/10.1023/A:1022936408676   DOI
15 A. C. Yunus, J. G. Afshin, Heat and Mass Transfer: Fundamentals and Applications, McGraw-Hill, 2012.
16 V. Neela, D. Amitava, Three-dimensional heat transfer analysis of LENS TM process using finite element method, The International Journal of Advanced Manufacturing Technology, Vol.45, No.9, pp.935-943, 2009. DOI: https://doi.org/10.1007/s00170-009-2024-9   DOI
17 K. J. Hwang, S. K. Yoon, Determination of the fire protection thickness of CFT column using heat transfer analysis, Journal of the Architectural Institute of Korea Structure & Construction, Vol.29, No.6, pp. 65-72, 2013. DOI: https://doi.org/10.5659/JAIK_SC.2013.29.6.65   DOI
18 X. Y. Cui, Z. C. Li, H. Feng, S. Z. Feng, Steady and transient heat transfer analysis using a stable node-based smoothed finite element method, International Journal of Thermal Sciences, Vol.110, No.1, pp.12-25, 2016. DOI: https://doi.org/10.1016/j.ijthermalsci.2016.06.027   DOI