• Asian Oncology Nursing
• /
• v.12 no.4
• /
• pp.323-330
• /
• 2012

Purpose: Gamma knife radiosurgery (GKR) requires frame positioning because the treatment target should be as close as possible to the center of the frame. The purpose of this study was to identify the level of pin-fixing (PFP) and removal pain (PRP), and the associated factors with the pain undergoing GKR. Methods: A total of 116 patients who underwent GKR for their brain tumor were recruited from C University hospital located in H city, J province. The level of pain was measured by the 10 cm VAS. Results: The level of PFP and PRP were 6.36 and 3.26 points, respectively. Step-wise multiple regressions found that the group who have not perceived numbness after applying 5% EMLA cream was the highest associated factor with PFP, following the time from lidocaine injection to pin-fixation, which explained 21% of total variance of the level of PFP. On the other hand, a group who did not perceive numbness after applying 10% lidocaine spray was the highest factor with PRP, among female patients, which explained 27% of total variance of the level of PRP. Conclusion: Both of PFP and PRP of the stereotactic frame were moderate so that nurses should consider diverse strategies to reduce pain among patients undergoing gamma knife radiosurgery.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3
• /
• pp.472-479
• /
• 2013

We carried out research into an environmentally friendly injection molding process that involves filling the mold with polymer after thin films are fixed into the cavity, without the coating, plating process. Film insert injection molding is a new technique in which molten plastic resin is injected into the cavity after films are precisely attached to the side of the mold wall. In the film insert injection molding process, the insert film is moved by the flow of the molten plastic resin. Overlap defects cause a decline in the productivity and the quality of the manufactured goods. To reduce overlap defects, new injection mold parts are proposed to produce automotive exterior parts using thin films. It is suggested that the best possible method would be to fix the thin films to one side of the mold wall, and develop interior pins to fix the films in the mold. Based on this new pin fixing system, the problem of the film being moved by the flow of the molten resin was improved.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.656-665
• /
• 1993

Two types of baby corn silk detachment systems called fixing and moving baby corn and based on applying frictional force on the silk were developed and evaluated. In the fixing mode the baby corn was fixed on a pin and a hollow frictional cylinder was moved concentrically and vertically along the baby corn towards the branch end. In the moving mode the baby corn was forced vertically towards the tip to pass through the same silk detachment cylinder. Traveling speeds of the detachment cylinder and the baby corn were 44.5 and 166.9 mm/s. In the fixing mode at silk moisture content of 91 % (w.b) silk detachment efficiencies at low and high speeds were 99.1 and 99.2%. The silk detachment efficiencies in the moving mode at low and high speeds were 96.6 and 98.5%. Damaged baby corn at low speed was less than at high speed in both modes. Minimum damage was nil in the fixing mode at low speed and the maximum was 47.5% in the moving mode at high speed. The damaged was due to ovaries r moval at the base near the joint between the baby corn and the branch.

• Journal of Biosystems Engineering
• /
• v.28 no.5
• /
• pp.429-438
• /
• 2003

This study exploits the robot system which is necessary in gene study and bio-technology industry. As well, a DNA chip, which of use has been increased recently, can be manufactured with this system. The robot consists of a device spotting DNA on the silylated slide, a well plate, a bed for fixing well plates, devices of washing and drying the pin in DNA spotting .device, a distillation-water vessel, and a discharge vessel of wash water. We made the period of sticking DNA to the pin on the well plate to be 15 seconds. The spot size of DNA was set to be 0.28 mm on the average by bringing the slide into contact with pin during 1 second. If DNA is spotted in minimum space possible about 0.32mm, this system can stick about 8,100 DNA spots on the well plate with this rate. Analyzing the procedure: Movement starts, Pin washes, dries, and smears DNA on the well plate. Spotting DNA onto 12 chips took 2 minutes and 50 seconds.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.6
• /
• pp.738-744
• /
• 2011

The reliability of blade root fixing section is required to endure the centrifugal force and vibration stress for the last stage blade of steam turbine in thermal power plant. Most of the domestic steam turbine last stage blades have finger type roots. The finger type blade is very complex, so the inspection had been performed only on the exposed fixing pin cross-section area due to the difficulty of inspection. But the centrifugal force and vibration stress are also applied at the blade root finger and the crack generates, so the inspection method for finger section is necessary. For the inspection of root finger, inspection points were decided by simulating ultra-sonic path with 3D modeling, curve-shape probe and fixing jig were invented, and the characteristics analysis method of ultrasonic reflection signal and defect signal disposition method were invented. This invented method was actually executed at site and prevented the blade liberation failure by detecting the cracks at the fingers. Also, the same type blades of the other turbines were inspected periodically and the reliability of the turbine increased.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1527-1532
• /
• 2008

45% of the sports accidents is the knee damage and the representative case is the damage of an Anterior Cruciate Ligament (ACL) and the Posterior Cruciate Ligament(PCL). Although the past different views of ACL reconstruction comes to an agreement, the disputes of PCL is remained yet. The most important engineering approach for these various surgery techniques is accurately to understand and to evaluate the fatigue behavior depending on the stress flow and the stress distribution under the allotted load and the cyclic load, which are caused by the graft fixing device, the proximal tibia of the PCL reconstructing structure. Therefore, this study is the basic research of these above facts. The current transtibial tunnel surgery using the cadaveric Achilles tendon grafts is chosen for the various PCL reconstruction. The relationships between the slippage, the extension ratio, and the slippage ratio by the heel bone fixing method and the soft tissue fixing method of the Achilles tendon were also defined. This research will be the essential data to help the resonable operating techniques for the next PCL reconstruction.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.10
• /
• pp.74-80
• /
• 2020

Crawler-type hydraulic devices facilitate forward and backward driving of construction equipment by converting power into mechanical energy. The existing hydraulic device performance test process is time- and labor-intensive. This study aims to improve efficiency and productivity by automating the hydraulic device production performance test processes, which have been separately conducted so far. We also used SolidWorksⓇ, a 3D modeling program, and ANSYSⓇ, a structural analysis tool, for structural analysis and to verify the suitability of fixing pins required for connecting a hydraulic device to performance test equipment. Our results that employing an automated hydraulic device performance test process improves efficiency.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1461-1466
• /
• 2008

In the case of Posterior Cruciate Ligament (PCL), the most frequent mechanism is the dashboard injury, which is directly pressurized to the anterior of the proximal tibia in the state of the knee hyperflexion. The PCL associated ligament damage happens when the posterior injury, the varus, the valgus, the hyperextension and the severe vagus torque are out of the critical value of PCL. After the successful operation cases of Anterior Cruciate Ligament (ACL) reconstruction using the allograft were informed from 1986, a number of results kept over the maximum 10 years were reported. Unfortunately, PCL reconstruction are crowded the surgery techniques such as the graft, the tibia fixing method, the fixation device, the location of the femoral tunnel, the number of the graft bundles and PCL reconstruction to access to the stability of the normal joint is being developed. Therefore, this study is the basic research of these above facts. The current transtibial tunnel surgery using the cadaveric Achilles tendon grafts is chosen for the various PCL reconstruction. The initial extension of the Achilles tendon by the fixing device and its location under the cyclic loading, were observed.

• Journal of IKEEE
• /
• v.20 no.4
• /
• pp.454-458
• /
• 2016

Generally, fix the end of the fabric to pin with the fabric tenter process. At this time, the pin fixing part of the fiber fabric bulges and deforms. The deformation of the textile causes deterioration of the quality of the textile product. Detection of fiber fabric selvage portion is always required in the processing of the fabric. This research is a non-contact sensor for sensing fiber selvage. In this study, Developed a non-contact fabric selvage detecting sensor for use in automatic selvage cutting system. For the production of the fabric selvage detecting sensor prototype it was produced by placing thirty two sensor 2.5 mm interval. The selvage sensor system experimentally confirmed that actual selvage detection is possible.

• Journal of Korean Society for Quality Management
• /
• v.47 no.3
• /
• pp.417-424
• /
• 2019

Purpose: In this study, the goal is to analyze this case to prevent the same accidents when using one-shot rifle. Methods: Detailed analysis of damaged parts must first be made in order to determine the cause of the abnormal explosion. The cause of abnormal operation can be determined by analyzing the information of damaged components and the firing mechanism of the weapon step by step. Also we can refer to a statement of shooter, witness and accident scene situation. Based on this theory, cause of abnormal firing can be narrow down. Results: Fracture of pin for fixing firing and latch is cause of abnormal operation of firing. Conclusion: It is deemed that periodic inspection and fundamental improvement of the structure are required to prevent the same accident as this.