• 한국농공학회지
• /
• 제33권4호
• /
• pp.52-60
• /
• 1991

This study was conducted to investigate the appropriate operation method minimizing the deviation between irrigation water demand and release from the reservoirs, and the simulation technique was used in the operation model. This model was applied to the grouped reservoirs system consisted of Dongsang, Daia and Keungchun reservoirs and Eowoo-weir in Chonbuk FLIA district. The results obtained in this study are summarized as follows; 1.The area above the Eowoo weir point was divided into 6 small watersheds, and daily inflows from each watershed were calculated by Tank model. It showed that the average annual runoff ratio was 40-60% respectively. 2.Based on the Blaney-Criddle formula daily water requirement of Chonbuk FLIA irrigation area was estimated, mean water requirement for paddy field during the irrigation period was 818.lmm. 3.Using the basic data such as inflow and water demand, four different release types were selected. Through the simulated operation the difference between intake water required at Eowoo-weir point and release from the 3 reservoirs was estimated. The best result was obtained when Daia and Keungchun reservoirs are operated parallelly at fixed release ratio and the release of Dongsang reservoir was determined according to the storage of Daia reservoir.

• 선박안전
• /
• 통권23호
• /
• pp.78-97
• /
• 2007

SPM, which is an abbreviation of Single Point Mooring, also called as SBM(Single Buoy Mooring), is a special buoy besides the quays of the harbor for mooring ships, and is normally a 3m wide cone or cylinder shaped steel drum fixed underwater so it won't move, and is used for mooring cargo-work at outer port by laid-up ships and large crude oil carrier. The work of VLCC SPM mainly is accomplished on the open sea. On the open sea as a result of meteorological condition and the ocean wave influence, When the weather condition is get bed, peremptorily moving to the safety place, because of the gale and the billow, almost happened frequently, the pilot is unable to go on board and the tug is also unable to be used Now because of the bad weather the VLCC SPM moving to the other safety place frequently happened in the ulsan port. the construction of new harbor, it constructed many break water around SPM. So that it is necessary to propose the new standard about how to maneuvering area actually. The standard for handling ranges of the SPM operations was tested and verified by a simulation.. So that it is necessary to propose the new standard about how to maneuvering area actually.

• 한국의학물리학회지:의학물리
• /
• 제32권4호
• /
• pp.122-129
• /
• 2021

Purpose: This study aimed to design a multipurpose dose verification phantom for external audits to secure safe and optimal radiation therapy. Methods: In this study, we used International Atomic Energy Agency (IAEA) LiF powder thermoluminescence dosimeter (TLD), which is generally used in the therapeutic radiation dose assurance project. The newly designed multipurpose phantom (MPP) consists of a container filled with water, a TLD holder, and two water-pressing covers. The size of the phantom was designed to be sufficient (30×30×30 cm³). The water container was filled with water and pressed with the cover for normal incidence to be fixed. The surface of the MPP was devised to maintain the same distance from the source at all times, even in the case of oblique incidence regardless of the water level. The MPP was irradiated with 6, 10, and 15 MV photon beams from Varian Linear Accelerator and measured by a 1.25 cm³ ionization chamber to get the correction factors. Monte Carlo (MC) simulation was also used to compare the measurements. Results: The result obtained by MC had a relatively high uncertainty of 1% at the dosimetry point, but it showed a correction factor value of 1.3% at the 5 cm point. The energy dependence was large at 6 MV and small at 15 MV. Various dosimetric parameters for external audits can be performed within an hour. Conclusions: The results allow an objective comparison of the quality assurance (QA) of individual hospitals. Therefore, this can be employed for external audits or QA systems in radiation therapy institutions.

• 한국통신학회논문지
• /
• 제19권11호
• /
• pp.2116-2132
• /
• 1994

본 논문에서는 완전 디지틀 방식의 HDTV 시스템의 채널 등화기법에 관하여 연구하였다. 기존의 등화기법에 대해 고찰하고 이의 컴퓨터 모의실험을 위하여 전송채널을 모델링하였다. 시정수 개념을 이용한 가변스텝크기를 갖는 LMS 알고리즘을 제안하여 성능을 평가하였다. HDTV 시스템을 위한 여러가지 채널 등화기법을 모델링된 채널조건하에서 실험하고 등화기 특성을 분석하였다. 고정소수점 연산으로 등화기법을 모의실험하고 고전송율에 적합한 필터구조를 보였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1418-1423
• /
• 2003

In this paper, a nonlinear controller based on sliding mode control is applied to a two -wheeled Welding Mobile Robot (WMR) to track a smooth-curved welding path at a constant velocity of the welding point. T he mobile robot is considered in terms of dynamics model in Cartesian coordinates and its parameters are exactly known . To obtain the controller, the tracking errors are defined, and the two sliding surfaces are chosen to guarantee that the errors converge to zero asymptotically. Two cases are to be considered: fixed torch and controllable torch. In addition, a simple way of measuring the errors is introduced using two potentiometers. The simulation results are included to illustrate the performance of the control law.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(4)
• /
• pp.92-97
• /
• 2000

An AMR(Adaptive Multi-Rate) speech coding algorithm has been adopted as a standard speech codec for IMT-2000. It is based on the algebraic CELP, and consists of eight speech coding modes having the bit rate from 4.75 kbit/s to 12.2 kbit/s. It also contains the VAD(Voice Activity Detector), SCR (Source Controlled Rate) operation, and error concealment scheme for robustness in a radio channel. The bit rate of AMR is changed on a frame basis depending on the channel condition. In this paper, we introduced AMR speech coding algorithm and performed the real-time implementation using TMS320C6201, i.e., a Texas Instrument's fixed-point DSP. With the ANSI C source code released from ETSI and 3GPP, we convert and optimize the program to make it run in real time using the C compiler and assembly language. It is verified that the decoded result of the implemented speech codec on the DSP is identical with the PC simulation result using ANSI C code for test sequences. Also, actual sound input/output test using microphone and speaker demonstrates its proper real-time operation without distortions or delays.

• 전자공학회논문지B
• /
• 제30B권9호
• /
• pp.122-132
• /
• 1993

In this paper, a self tuning control algorithm is proposed for the high performance drive of DC servo motor, which is adequate to the servo system having frequent load variation. In order to realization of the algorithm, the control system is developed using a fixed point high speed digital signal processor. TMS320C25. Control algorithm is composed of two parts. One is estimation law part using recursive least mean square method, the other is control law part using minimum variance control method. For the purpose of easiness of applying adaptive algorithm, developed control system is based o PC-DSP structure which can develop, debug programs and monitor the dynamic behaviors,etc. Through computer simulation and experimental results, it was verified that proposed control system could estimate system parameters and was robust to the variation of the load and as a result, was adequate to the servo motor drives.

• 한국정보통신학회논문지
• /
• 제7권4호
• /
• pp.646-651
• /
• 2003

본 논문에서는 IMT2000 및 위성 DVB등 여러 규격에서 표준으로 채택된 터보 부호에서 사용되는 터보 인터리버의 성능에 대하여 비교분석하였다. BER 성능평가를 위해 레일리 페이딩 채널에서 고정소수점방식으로 컴퓨터 모의실험을 수행하였다. 공정한 비교를 위해 가능한한 인터리버의 크기를 같게 설정하였다. 모의실험결과 인터리버의 크기가 클수록 W-CDMA에서 사용하는 인터리버가 CDMA2000 및 위성 DVB용으로 사용하는 터보 인터리버에 비해 성능이 우수하다는 것을 확인하였다. 이러한 현상은 인터리버의 크기가 증가할 수록 더욱 두드러졌다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1682-1684
• /
• 2001

In removing the flue-gas using electrical discharge method, it is important to dissociate or ionize the atoms and molecules by the collisions with energetic electrons and it produces the radicals that are used to decompose the pollutants. For that purpose, a bidirectional pulsed voltage is used to produce lots of energetic electrons efficiently and increase the power efficiency. The simulation is performed with changing the pulsewidth under the fixed applied voltage. The particle-mesh model coupling the NGP(nearest-grid-point) to FEM(finite element method) is used to simulate the behavior of electrons and the spatio-temporal variation of the electric field for the streamer in discharge tube.

• 전기학회논문지
• /
• 제64권2호
• /
• pp.268-275
• /
• 2015

This paper proposes a method of switching to improve power loss for the single-phase three-level NPC inverter. The conventional switching methods, which are called as the bipolar and unipolar switching methods, are used for single phase inverters using three-level topology. However, these switching method have disadvantage in the power loss. Because all of the switch are operated. To reduce the power loss of the three-level NPC inverter, clamp switching method is introduced in this paper. This way, one of the lag is fixed that switching loss is reduced. This paper analyzes and compares power losses of unipolar method and clamp method. The validity of the power loss analysis is verified through the simulation and experimental results.