• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.4
• /
• pp.769-781
• /
• 1997

The purpose of this research is to show how to use the patternist's CAD system in order to make design patterns efficiantly. Using the PAD System Technologies company's PAD System Module, which is very officiant in designing patterns, the basic pattern or design pattern can be designed and applyed to the Sample Module, thus, then it could manufacture, retouch or choose a model, making it posible to go to the next level which is seam patterns for industrial use. By understanding the change of the design that is chosen through the design pattern making and Sample Module process', this study is presentated a plan on how to utilize the patternist's working adaption ability by the CAD system, and also considered the problems in using it. Ability of Design Confrontation of CAD System: 1) The result of an operation can be saved and retouched. On a saved list the patterns can be chosen and changed, thus, making it posible to complete a design very quickly. 2) When sewing every designed pattern in Sample Module, the model can be operated merely by selecting each sewing position, thus creating the same effect of a designer's muslin sample process in a much lesser time. Point at issue in the utilization CAD system: 1) When combining two darts into one place the amounts of darts that are already these have to be erasers, and then, the two darts points are moved that place, thus, containing them, which is very conplicated. 2) When making a gathering, because system can only be recognized in a opend line, the pattern should be separated in order to put a gathering inside a pattern. 3) In order to readjust the amounte of dart. The dart is erased first and then made new dart again. 4) When making tucks in a Sample Module, the form that gets narrow towards the pivot point can not be recognized so the sewing lines of the tucks is adjusted into parallel lines. 5) The Sample Module 3D operation can not attach the bodice to the shirts, instead they become fixed into each other. In the case of shoulder line tucks the amounts of pleats can not be expanded draperary naturally, thus, making it hard to showing the silhouette accurately. If these problems are solved, especially if the silhouette of a model can be created to have natural drapery in the 3D Module, models can be shown on the screen in possible to compare and examine even a change of a detail, by designing this 3D Module Production sample process will be more effective, thus, making the CAD system more useful in sewing design process.

• Journal of Korean Dental Science
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2022

Purpose: Intraoral scanners, desktop scanners, and cone-beam computed tomography (CBCT) are being used in a complementary way for diagnosis and treatment planning. Limited patient-based results are available about dimensional reproducibility among different three-dimensional imaging systems. This study aimed to evaluate dimensional reproducibility among patient-derived digital models created from an intraoral scanner, desktop scanner, and two CBCT systems. Materials and Methods: Twenty-nine arches from sixteen patients who were candidates for implant treatments were enrolled. Different types of CBCT systems (KCT and VCT) were used before and after the surgery. Polyvinylsiloxane impressions were taken on the enrolled arches after the healing period. Gypsum casts were fabricated and scanned with an intraoral scanner (CIOS) and desktop scanner (MDS). Four test groups of digital models, each from CIOS, MDS, KCT, and VCT, respectively, were compared to the reference gypsum cast group. For comparison of linear measurements, intercanine and intermolar widths and left and right canine to molar lengths were measured on individual gypsum cast and digital models. All measurements were triplicated, and the averages were used for statistics. Bland-Altman plots were drawn to assess the degree of agreement between each test group with the reference gypsum cast group. A linear mixed model was used to analyze the fixed effect of the test groups compared to the reference group (α=0.05). Result: The Bland-Altman plots showed that the bias of each test group was -0.07 mm for CIOS, -0.07 mm for MDS, -0.21 mm for VCT, and -0.25 mm for KCT. The linear mixed model did not show significant differences between the test and reference groups (P>0.05). Conclusion: The linear distances measured on the digital models created from CIOS, MDS, and two CBCT systems showed slightly larger than the references but clinically acceptable reproducibility for diagnosis and treatment planning.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.365-375
• /
• 2009

Statement of problems: Stress analysis on implant components of the combined screw- and cement-retained implant prosthesis has not investigated yet. Purpose: The purpose of this study was to assess the load distribution characteristics of implant prostheses with the different prosthodontic retention types, such as cement-type, screw-type and combined type by using 3-dimensional finite element analysis. Material and methods: A 3-dimensional finite element model was created in which two SS II implants (Osstem Co. Ltd.) were placed in the areas of the first premolar and the first molar in the mandible, and three-unit fixed partial dentures with four different retention types were fabricated on the two SS II implants. Model 1 was a cement-retained implant restoration made on two cement-retained type abutments (Comocta abutment; Osstem Co. Ltd.), and Model 2 was a screw-retained implant restoration made on the screw-retained type abutments (Octa abutment; Osstem Co. Ltd.). Model 3 was a combined type implant restoration made on the cement-retained type abutment (Comocta abutment) for the first molar and the screw-retained type abutment (Octa abutment) for the first premolar. Lastly, Model 4 was a combined type implant restoration made on the screw-retained type abutment (Octa abutment) for the first molar and the cement-retained type abutment (Comocta abutment) for the first premolar. Average masticatory force was applied on the central fossa in a vertical direction, and on the buccal cusp in a vertical and oblique direction for each model. Von-Mises stress patterns on alveolar bone, implant body, abutment, abutment screw, and prosthetic screw around implant prostheses were evaluated through 3-dimensional finite element analysis. Results: Model 2 showed the lowest von Mises stress. In all models, the von Mises stress distribution of cortical bone, cancellous bone and implant body showed the similar pattern. Regardless of loading conditions and type of abutment system, the stress of bone was concentrated on the cortical bone. The von-Mises stress on abutment, abutment screw, and prosthetic screw showed the lower values for the screw-retained type abutment than for the cement-retained type abutment regardless of the model type. There was little reciprocal effect of the abutment system between the molar and the premolar position. For all models, buccal cusp oblique loading caused the largest stress, followed by buccal cusp vertical loading and center vertical loading. Conclusion: Within the limitation of the FEA study, the combined type implant prosthesis did not demonstrate more stress around implant components than the cement type implant prosthesis. Under the assumption of ideal passive fit, the screw-type implant prosthesis showed the east stress around implant components.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.4
• /
• pp.13-25
• /
• 2014

This study advances research on new venture by taking the organizational ecology perspective to explore the relationship between social legitimacy and new venture performance. We examine how entrepreneurs' organizing activity and social norm shape the social legitimacy. This paper also categorizes the social norms into three parts: social norm that is 1) supporting success achieved through one's own effort 2) encouraging start-up, and 3) promoting risk-taking. Using a dataset of PSED(Panel Study of Entrepreneurial Dynamics) from 2005 to 2011, we found that entrepreneurs' organizing activity has a positive effect on new venture performance. In addition, this study presents the moderating effects of 'liability of newness' that decreases the effect of organizing activity on new venture performance. Interestingly, with respect to the social norm, 'liability of newness' only moderates the relationship between start-up encouraging social norm and new venture performance.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.5
• /
• pp.507-524
• /
• 2002

Load transfer of implant overdenture varies depending on anchorage systems that are the design of the superstructure and substructure and the choice of attachment. Overload by using improper anchorage system not only will cause fracture of the framework or screw but also may cause failure of osseointegration. Choosing anchorage system in making prosthesis, therefore, can be considered to be one of the most important factors that affect long-term success of implant treatment. In this study, in order to determine the effect of anchorage systems on load transfer in mandibular implant overdenture in which 4 implants were placed in the interforaminal region, patterns of stress distribution in implant supporting bone in case of unilateral vertical loading on mandibular left first molar were compared each other according to various types of anchorage system using three-dimensional photoelastic stress analysis. The five photoelastic overdenture models utilizing Hader bar without cantilever using clips(type 1), cantilevered Hader bar using clips(type 2), cantilevered Hader bar with milled surface using clips(type 3), cantilevered milled-bar using swivel-latchs and frictional pins(type 4), and Hader bar using clip and ERA attachments(type 5), and one cantilevered fixed-detachable prosthesis(type 6) model as control were fabricated. The following conclusions were drawn within the limitations of this study, 1. In all experimental models. the highest stress was concentrated on the most distal implant supporting bone on loaded side. 2. Maximum fringe orders on ipsilateral distal implant supporting bone in a ascending order is as follows: type 5, type 1, type 4, type 2 and type 3, and type 6. 3. Regardless of anchorage systems. more or less stresses were generated on the residual ridge under distal extension base of all overdenture models. To summarize the above mentioned results, in case of the patients with unfavorable biomechanical conditions such as not sufficient number of supporting implants, short length of the implant and unfavorable antero-posterior spread. selecting resilient type attachment or minimizing distal cantilever bar is considered to be appropriate methods to prevent overloading on implants by reducing cantilever effect and gaining more support from the distal residual ridge.

• Management & Information Systems Review
• /
• v.33 no.3
• /
• pp.21-33
• /
• 2014

This study investigated the effect of protection of property right on foreign direct investment. With the US. multinational corporations over the periods from 2000 to 2008, this study used the FEM and system GMM, and found that the change of protection of property right level positively affects attracting foreign direct investment while protection of property right level itself does not. In the analyses on high income and low income countries(by income level), only the change of protection of property right level positively affects attracting foreign direct investment in low income countries. In considering the problem of heteroscedasticity on the error term, this study used FGLS and PCSE estimation methods. It is reported that the change of protection of property right level positively affects attracting foreign direct investment while protection of property right level itself does not. And only the change of protection of property right level positively affects attracting foreign direct investment in low income countries. This result means the change of protection of property right level is a key determinant to attract foreign direct investment.

• Korean Journal of Social Welfare
• /
• v.67 no.4
• /
• pp.279-299
• /
• 2015

This study examines the impact of Long-Term Care Insurance(LTCI) on family caregivers(especially focused on female household members) labor supply in South Korea. When public care and informal care are substitutes, LTCI will change allocation of time of family caregivers to spend more time to paid work. The impact of LTCI on labor supply depends on each country's institutional level of public care services. If public care can not substitute for informal care, labor supply of family caregivers will not rise significantly. The conclusions of vigorous empirical study from western countries' are incompatible and problem of endogeneity in terms of methodology has been raised consistently. The dataset of this study are used the third and ninth waves of Korea Welfare Panel. As a result, the introduction of LTCI had no effect on labor supply of household members. Robust findings suggest the positive effects of caregiving on labor market outcomes in simple comparison t-test, but not in fixed-effect regression. Compared with western countries, South Korea's public care services can be interpreted as a supplement to only part that remained at the level does not substitute informal care. These findings may suggest that if LTCI become much more prevalent in the future, senior citizens and family members will be able to choose the LTCI arrangement that best suits their needs.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.sup3
• /
• pp.323-335
• /
• 2016

Breast cancer risk assessment has developed during years and evaluation of genetic factor affecting risk of breast cancer is an important component of this risk assessment. The aim of this meta-analysis was to investigate the role of XRCC1 polymorphisms (Arg194Trp, Arg280His and Arg399Gln) in risk of breast cancer among different population and categories of menopausal status.PubMed, Medline, Web of Science, and PubMed Central were systematically searched to identify studies evaluating association between breast cancer and XRCC1 gene polymorphisms (Arg194Trp, Arg280His and Arg399Gln). Two authors independently extracted required information. Odds Ratios were pooled for four genetic inheritance models using both fixed and the DerSimonian and Laird random-effect models. Egger's test and contour-enhanced funnel plot was used to evaluate publication bias and small study effect. Additional subgroup analysis was performed for menopausal status, ethnicity, and source of controls. After evaluation and applying inclusion criteria on extracted studies, fifty three studies were included in this meta-analysis. For polymorphisms of Arg194Trp and Arg280His, no significant association was observed in all genetic models. Arg194Trp had a protective effect in post-menopausal status only in homozygote model (OR=0.57 [0.37-0.88]). Arg399Gln showed significant association with breast cancer in homozygote (OR=1.21 [1.10-1.34]), dominant (OR=1.09 [1.03-1.15]) and recessive (OR=1.21 [1.09- 1.35]) genetic models. Arg399Gln was associated with higher risk in post-menopausal status for homozygote and heterozygote models. Our findings suggest that XRCC1 gene polymorphisms modify breast cancer risk in different populations and different categories of menopausal status.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.5
• /
• pp.367-371
• /
• 1986

Dynamic and equilibrium properties of n-alkane chains immersed in solvent molecules have been investigated by a molecular dynamics method. The n-alkane chain is assumed to be a chain of elements (CH$_2$) interconnected by bonds having a fixed bond length and bond angle, but each bond of the chain is allowed to execute hindered internal rotation. We studied the effect of the number of the chain elements (N$_c$ = 10, 15 and 20) on the equilibrium properties of the system, e.g., the pair correlation functions between a chain element and solvent molecules, g$_{cs}$(r), and between the chain elements, g$_{cc}$(r), and the configurational properties such as the mean-square end-to-end distance < R$^2$ >, the mean-square radius of gyration < S$^2$ >, and the eigenvalues of the moment-of-inertia tensor < S$_i^2$ > / < S$^2$ > (i = 1, 2 and 3). We also studied the dynamic properties of the system, e.g., the autocorrelation function C(A;t) where A = R$^2$(t), = S$^2$(t), or = ${\vec{V}}(t)({\vec{V}}$ = velocity of the center of mass), and the diffusion coefficient D. The g$_{cs}$(r)'s are almost equal irrespective of the change of Nc while g$_{cc}$(r) becomes larger as N$_c$ increases; The MD computed configurational properties < R$^2$2 > and < S$^2$ > were found to be a little different from the values calculated from the statistical equations of < R$^2$ > and < S$^2$ >, it may be due to the fact that our model for the MD simulations includes a long-range volume effect. From the < S$_i^2$ > / < S$^2$ >, it is found that the chain molecule has a nearly spherical shape irrespective of the variation of N$_c$. For the dynamic properties we found that the C(R$^2$;t) and C(S$^2$;t) of lower N$_c$ decay faster than those of higher N$_c$, while the C($\vec V$;t) of the center of mass in the chain is weakly dependent on the N$_c$. The center of mass diffusion coefficient D$_c$ decreases as N$_c$ increases while the end point diffusion coefficient D$_e$ is nearly equal irrespective of the change of N$_c$.

• (The) Korean Journal of Advertising
• /
• v.27 no.4
• /
• pp.71-90
• /
• 2016

Managers of firms often wonder whether advertising expenditure is a mere expense or an investment with foreseeable future returns. When top management makes a decision on the level of advertising expense, it must consider whether an increase in advertising spending will positively affect brand loyalty and the increased brand loyalty will positively affect profitability and firm value. We investigate the industry-specific effects of advertising spending on marketing and the effect of loyalty on financial performances using top companies in Korea, specifically, 184 firms' data from year 1998 to 2014. The empirical results of a fixed effect model indicate that the effects of advertising on customer satisfaction index and loyalty on the firms' financial performance are positive. In service industry, unlike manufacturing industry, advertising has a significantly positive effect Brand Loyalty. In addition, Brand Loyalty had positive impacts on ROA and ROE as profitability index, and Tobin's q, a market-value index. The research results suggest that advertising in service industry should be considered as customer satisfaction investment and the increased Brand Loyalty as a profit for present and a business investment for the future respectively.