• The korean journal of orthodontics
• /
• v.34 no.4 s.105
• /
• pp.363-370
• /
• 2004

Patients with fixed orthodontic appliances frequently have increased levels of plaque accumulation leading to the possibility of gingivitis or enamel decalcification. Although many methods may be helpful in reducing dental plaque formation, the optimal mechanical removal of plaque is the most important factor during orthodontic treatment. The purpose of this study was to evaluate the efficacy of an electric toothbrush (with a specially designed orthodontic brush head) compared to a manual toothbrush in controlling plaque and gingivitis for patients with fixed orthodontic appliances. Oral hygiene status was measured in thirty-four patients using a plaque index, a gingival index and a bleeding index, before and four weeks after the attachment of fixed orthodontic appliances. Patients were randomly divided into two groups: electric and manual toothbrush groups. Oral hygiene instruction was given according to the type of toothbrush used. The Braun Oral-B D9511 with Braun Oral-B Ortho OD 15-1 brush head was used as the electric toothbrush while the Butler G.U.M. 124 was given as the manual toothbrush. After four md eight weeks, oral hygiene status was measured again. Through a comparison between the electric and the manual toothbrush groups, the following results were obtained. 1. All oral hygiene indices showed an increasing tendency after four weeks of fixed orthodontic appliance. 2. All indices presented a decreasing tendency four and eight weeks after oral hygiene instruction. 3. In case of the gingival index and bleeding index, the decreasing tendency did not show a statistically significant difference between the electric and the manual toothbrush groups. 4. The decreasing tendency of plaque index presented a statistically significant difference between the two groups, showing that the electric toothbrush was more effective in terms of oral hygiene. These findings suggest that an electric toothbrush is useful to orthodontic patients with fixed appliances.

• The korean journal of orthodontics
• /
• v.45 no.5
• /
• pp.261-267
• /
• 2015

Objective: To measure aspartate aminotransferase (AST) activity in the pulp of teeth treated with fixed appliances for 6 months, and compare it with AST activity measured in untreated teeth. Methods: The study sample consisted of 16 healthy subjects (mean age $25.7{\pm}4.3$ years) who required the extraction of maxillary premolars for orthodontic reasons. Of these, 6 individuals had a total of 11 sound teeth extracted without any orthodontic treatment (the control group), and 10 individuals had a total of 20 sound teeth extracted after 6 months of orthodontic alignment (the experimental group). Dental pulp samples were extracted from all control and experimental teeth, and the AST activity exhibited by these samples was determined spectrophotometrically at $20^{\circ}C$. Results: Mean AST values were $25.29{\times}10^{-5}U/mg$ (standard deviation [SD] 9.95) in the control group and $27.54{\times}10^{-5}U/mg$ (SD 31.81) in the experimental group. The difference between these means was not statistically significantly (p = 0.778), and the distribution of the AST values was also similar in both groups. Conclusions: No statistically significant increase in AST activity in the pulp of mechanically loaded teeth was detected after 6 months of orthodontic alignment, as compared to that of teeth extracted from individuals who had not undergone orthodontic treatment. This suggests that time-related regenerative processes occur in the dental pulp.

• The korean journal of orthodontics
• /
• v.29 no.3 s.74
• /
• pp.361-374
• /
• 1999

Intraoral filled type of orthodontic appliance can cause reversible or irreversible damages such as gingivitis, periodontitis, enamel decalcification, dental caries, root resorption, and pulpal changes. Such adverse effects are brought by increase in dental plaque as well as oral flora. Such an increase causes gingival inflammation and enamel decalcification. The purpose of this study is to get klowledge on initial changes in dental plaque, gingivitis, and enamel decalcification after bonding fixed orthodontic appliances according to time flow, gender, and sides(right/left) of premolar region. For control group, 48 students of dental college, Yonsei university(26 males, 22 females) were chosen; for experimental group, 73 orthodontic patients(36 males, 37 females) who will be treated with fixed appliances were chosen. All the subjects had no systemic disease, juvenile periodontitis and all the females had passed their ,menarche. Tooth brushing instruction was given to all the subjects prior to the experiment. For control group, plaque index, gingival index, and decalcification index were measured twice at 3 weeks interval ; for experimental group, the same was done prior to, 3, 6, 9 weeks after bonding fixed appliances. The following results were obtained: 1. In plaque index 3 weeks after placement of appliances, and it showed gradual increase afterwards. 2. In gingival index3 weeks after placement of appliances, and afterwards it showed increase at a faster rate than plaque index. 3. Enamel decalcification began to show between 3 and 6 weeks after bonding fixed appliances. Decalcification index began to increase 6 weeks after appliance placement, but there was no statistical significance. 4. When the comparison was made between two sides of premolar region, the right side showed greater index in plaque and gingival index of experimental group.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.24 no.5
• /
• pp.361-366
• /
• 2024

Orthognathic surgery often requires intraoral orthodontic appliances that are fixed directly to the bone, which can complicate nasotracheal intubation if the devices protrude into the nasal cavity. This case report describes a 19-year-old man scheduled for elective orthognathic surgery who experienced recurrent cuff tears of the endotracheal tube during nasotracheal intubation due to protruding orthodontic screws in the palate. Despite initial attempts at nasotracheal intubation through the left nostril, the cuff of the 7.0 mm internal diameter (ID) Ring, Adair & Elwyn (RAE) tube repeatedly ruptured, with identical rupture patterns observed. Facial CT revealed that the orthodontic screws had protruded into both nasal cavities with significant visibility in the sagittal, coronal, and transverse views. Fiberoptic examination of the left nasal passage identified a firm protrusion below the inferior turbinate, corresponding to the location of the screw, which likely caused the cuff tears. Intubation was successfully performed via the right nostril during the fiberoptic examination. This case highlights the critical importance of evaluating intraoral corrective devices using comprehensive craniofacial imaging before anesthesia induction, as well as conducting fiberoptic examinations during intubation to avoid complications and ensure patient safety.

• The korean journal of orthodontics
• /
• v.51 no.5
• /
• pp.329-336
• /
• 2021

Objective: To compare the magnitude of external apical root resorption (EARR) 6 months after starting orthodontic treatment using orthodontic aligners (OAs) and fixed appliances (FAs). Methods: This parallel randomized clinical trial included 40 patients randomized into two groups: OA group (n = 20, 160 incisors) and FA group (n = 20, 160 incisors). For evaluation of the tooth length, periapical radiographs and standardized linear measurements of the maxillary and mandibular incisors were acquired before (T0) and 6 months after treatment initiation (T1). EARR was calculated through the difference in length between the two time points (T1-T0). Statistical comparisons were performed by means of using t-tests, chi-squared test and covariance analysis (a = 5%). Results: Rounding of the root apex was observed in both groups; the resorption involved 2.88% of the root length, so 97.12% of the tooth length remained intact. Intragroup comparisons between the two time points revealed a significant difference, with (T1-T0) ranging from -0.52 to -0.88 mm in the FA group and from -0.52 to -0.85 mm in the OA group. In the intergroup comparisons, only tooth #21 presented a statistically significant difference (OA: -0.52 ± 0.57 mm, FA: -0.86 ± 0.60 mm); however, the overall differences between groups were not clinically relevant, ranging from 0.03 to 0.35 mm. Conclusions: OA and FA treatment resulted in a similar degree of EARR in the maxillary and mandibular incisors at 6 months after treatment initiation. However, the amount of resorption was small and does not impair tooth longevity.

• Restorative Dentistry and Endodontics
• /
• v.39 no.3
• /
• pp.226-229
• /
• 2014

Orthodontic extrusion is usually performed by means of a fixed orthodontic appliance that utilizes arch wire attached to adjacent teeth and transfers the desired force by elastic from the wire to the root. However, clinicians often encounter cases where the bonding required for tooth traction is not possible because the adjacent teeth have been restored with ceramic or veneer. The purpose of this case report is to describe a modified orthodontic extrusion appliance that is useful when conventional orthodontic treatment is not possible. The modified appliance was fabricated using an artificial tooth, clear plastic sheeting, and a braided fiber-reinforced composite strip that covered adjacent teeth without bonding. It satisfied the esthetic and functional needs of the patient and established the optimal biologic width.

• The korean journal of orthodontics
• /
• v.39 no.6
• /
• pp.383-392
• /
• 2009

Objective: The purpose of this study was to evaluate the efficacy of a slim bristled toothbrush compared with a V-shaped orthodontic toothbrush in patients with fixed orthodontic appliances. Methods: Thirty four orthodontic patients receiving edgewise treatment were randomly assigned to two groups, a slim bristled toothbrush (Nano silver slim care) and a V-shaped toothbrush (Oral-B). Plaque index, gingival index and bleeding index were recorded at the beginning of the study (baseline), 2 weeks, 4 weeks and 6 weeks after new toothbrushes were supplied and the results were analyzed statistically. Results: No statistically significant differences were found for plaque index, gingival index and bleeding index between toothbrush groups during the 6 weeks. Plaque and gingival indices were decreased at 2 weeks and 4 weeks but increased at 6 weeks in both toothbrush groups. Bleeding index in the V-shaped toothbrush group showed the lowest value at 2 weeks then increased at 4 weeks and 6 weeks but in the slim bristled toothbrush group decreased from 2 weeks through 6 weeks to under baseline levels. Patients in their twenties had significantly lower values than teenagers in the slim bristled toothbrush group (p < 0.013). Conclusions: The results would suggest that both of the toothbrushes are equally effective but the use of a slim bristled toothbrush may be of benefit in promoting gingival health for fixed orthodontic appliance patients in their twenties and over.

• Journal of Korean society of Dental Hygiene
• /
• v.14 no.3
• /
• pp.343-351
• /
• 2014

Objectives : The purpose of the study is to investigate the influencing factors on the sleep quality in patients with fixed orthodontic appliances. This study intended to find out the improving measures of sleep quality in orthodontic patients. Methods : The subjects were 222 orthodontic patients in Busan. A self-reported questionnaire was filled out by the patients from June to August, 2012. Data were analyzed by SAS version 9.20 including frequency analysis, ANOVA, t-test, multiple regression analysis, and Duncan post-hoc test. Results : The quality of sleep in the patients at the initial stage of orthodontic treatment was influenced by ceramic orthodontic appliances, tooth extraction, Bite adjustment, disturbed sleep habits, and temporomandibular joint pain. Conclusions : The most important factors influencing on the sleep quality were the anxiety toward the treatment and tooth extraction at the initial stage of treatment. A more careful conversation and collaboration are needed in the orthodontic treatment.

• The korean journal of orthodontics
• /
• v.33 no.1 s.96
• /
• pp.21-29
• /
• 2003

Recent developments in software technology have made it possible to create a virtual three-dimensional model of the dental arches from digitally scanned casts of a patient's dentition. This modelmay then be manipulated with software to produce stages of tooth movement from the initial malocclusion to the final desired occlusion. A sterolithograghic model is made for each stage of tooth movement which is the basis for construction of a series of clear and thin overlay appliances. These appliances are worn full time by the patient to move the teeth according to the programmed stages of movement. Malocclusions involving mild to moderate crowding and space closure have been proven to be successfully treated with this appliance. Experience with this appliance has demonstrated excellent patient compliance with less discomfort, improved esthetics and oral hygiene control, when compared with fixed orthodontic appliances. Orthodontic treatment with this appliance is a potentially useful alternative approach to fixed appliances for treatment of a variety of malocclusions in patients with fully erupted permanent teeth.

• The korean journal of orthodontics
• /
• v.46 no.1
• /
• pp.55-61
• /
• 2016

Skeletal anchorage-assisted upper molar distalization has become one of the standard treatment modalities for the correction of Class II malocclusion. The purpose of this study was to analyze maxillary molar movement patterns according to appliance design, with the simultaneous use of buccal fixed orthodontic appliances. The authors devised two distinct types of midpalatal miniscrew-assisted maxillary molar distalizers, a lingual arch type and a pendulum type. Fourteen patients treated with one of the two types of distalizers were enrolled in the study, and the patterns of tooth movement associated with each type were compared. Pre- and post-treatment lateral cephalograms were analyzed. The lingual arch type was associated with relatively bodily upper molar distalization, while the pendulum type was associated with distal tipping with intrusion of the upper molar. Clinicians should be aware of the expected tooth movement associated with each appliance design. Further well designed studies with larger sample sizes are required.