• Journal of Advanced Research in Ocean Engineering
• /
• 제2권3호
• /
• pp.136-149
• /
• 2016

Green water impact occurs frequently on offshore platform due to waves with a height greater relative to the freeboard of the structure. This phenomenon exerts a large impact load on the deck. In this paper, offshore platform models with green water protectors of various shapes were fixed to the center of a 3D wave tank to measure the impact pressure acting on the various points on deck and protectors. The impact pressure distribution differed depending on the protector shape, and various patterns of wave creeping up the protector were observed. The protector shape that exerted the lowest pressure impact on the deck will be useful in the deck design of offshore platform, and the model test results will be expected to be used for designers to select the best protector form.

• 대한기계학회논문집B
• /
• 제26권11호
• /
• pp.1513-1520
• /
• 2002

Effect of Convex Surface Curvature on the Onset of Nucleate Boiling of Subcooled Fluid Flow in Vertical Concentric Annuli An experimental study has been carried out to investigate the effect of the transverse convex surface curvature of core tubes on heat transfer in concentric annular tubes. Water is used as the working fluid. Three annuli having a different radius of the inner cores, Ri=3.18mm, 6.35mm, and 12.70mm with a fixed ratio of Ri/Ro=0.5 are used over a range of the Reynolds number between about 40,000 and 80,000. The inner cores are made of smooth stainless steel tubes and heated electrically to provide constant heat fluxes throughout the whole length of each test section. Experimental result shows that heat flux values on the onset of nucleate boiling of the smaller inner diameter model is much higher than that of the larger size test model.

• 대한조선학회논문집
• /
• 제57권6호
• /
• pp.331-344
• /
• 2020

Ship's hydrodynamic coefficients in manoeuvring equations are generally derived by captive model tests or numerical calculations. Empirical formulas have been also proposed in some previous researches, which were useful for practical predictions of hydrodynamic coefficients of a ship by using main dimensions only. In this study, ship's hydrodynamic coefficients based on empirical formulas were optimized by using its free running test data. Eight manoeuvring performance indices including steady turning radius, reach in zig-zag as well as well-known IMO criteria indices are selected in order to compare simulation results with free runs effectively. Sensitivities of hydrodynamic coefficients on manoeuvring performance indices are analyzed. And hydrodynamic coefficients are tuned within fixed bounds in order of sensitivity so that they are tuned as little as possible. Linear and nonlinear coefficients are successively tuned by using zig-zag and turning performance indices. Trajectories and velocity components by simulations with tuned hydrodynamic coefficients are in good agreements with free running tests. Tuned coefficients are also compared with coefficients by captive model tests or RANS calculations in other previous researches, and the magnitudes and signs of tunes are discussed.

• 보건행정학회지
• /
• 제28권2호
• /
• pp.128-137
• /
• 2018

Background: This study aims to utilize Organization for Economic Cooperation and Development (OECD) data to identify macroscopic determinants of health at national level and to utilize it in health policy development through comparison and analysis with Korea. Methods: The potential years of life lost (PYLL) were used as dependent variables and 19 indicators were selected as health determinants to be independent variables based on the results of previous studies. Data analysis was done using SAS ver. 9.4 package (SAS Institute Inc., Cary, NC, USA) and model used in technical statistics concerning PYLL by countries, multi-linearity test between independent variables and OECD economic studies were modified and used. Results: From 1994 to 2012, the average PYLL for OECD countries was 4,262.9 years, the highest in Estonia and the lowest in Iceland. As a result of the analysis using the fixed effect model, the significant variables affecting PYLL were four variables: gross domestic product, nitric oxide, tobacco consumption, and number of doctors. The health determinants that had more influence on the PYLL of Korean people compared to other OECD countries were tobacco consumption, calorie consumption, fat intake and total health expenditure. Conclusion: In order to effectively reduce unnecessary deaths, we must continue to strengthen our smoking policy and nutrition policies such as calorie and fat intake. It is necessary to prevent the increase of total health expenditure due to the increase in the prevalence of chronic diseases and to strengthen the public health aspect.

• 통상정보연구
• /
• 제16권2호
• /
• pp.279-296
• /
• 2014

본 연구는 우리나라 중소기업의 기술수출에 초점을 맞추어 이에 대한 폭넓은 고찰과 함께, 2003년-2011년까지 72개국과의 기술무역 data를 활용하여 우리나라 중소기업의 기술수출에 영향을 미치는 다양한 변수를 발굴, 이에 대한 실증분석을 시도하였다. 이러한 실증분석을 통해 우리나라 중소기업의 기술수출에 영향을 미치는 다양한 요인과의 인과관계 분석이 본 연구의 목적이다. 실증결과, 일인당 GDP가 높고, GDP 대비 R&D지출이 많은 국가일수록, 우리나라 대기업의 기술도입이 적은 국가일수록, 또한 기술무역 상대국의 미국특허 등록 기업수가 적은 국가일수록 우리나라 중소기업의 기술수출은 증가하는 것으로 추정되고 있다. 따라서 우리나라 중소기업들이 기술수출 대상국을 선정함에 있어 유의미하게 도출된 요인들을 활용, 기술수출 경쟁력 제고시 고려되어야 함을 시사하고 있다.

• Advances in nano research
• /
• 제10권1호
• /
• pp.77-90
• /
• 2021

In the present study, novel chitosan coated magnetic magnetite (Fe3O4) nanoparticles were successfully biosynthesized from mushroom, Agaricus campestris, extract. The obtained bio-nanocomposite material was used to investigate ultra-fast and highly efficient for removal of Ni2+ ions in a fixed-bed column. Chitosan was treated as polyelectrolyte complex with Fe3O4 nanoparticles and a Fungal Bio-Nanocomposite Material (FBNM) was derived. The FBNM was characterized by using X-Ray Diffractometer (XRD), Scanning Electron Microscopy-Energy Dispersive X-Ray Spectroscopy (SEM-EDS), Fourier Transform Infrared spectra (FTIR) and Thermogravimetric Analysis (TGA) techniques and under varied experimental conditions. The influence of some important operating conditions including pH, flow rate and initial Ni2+ concentration on the uptake of Ni2+ solution was also optimized using a synthetic water sample. A Central Composite Design (CCD) combined with Response Surface Modeling (RSM) was carried out to maximize Ni2+ removal using FBNM for adsorption process. A regression model was derived using CCD to predict the responses and analysis of variance (ANOVA) and lack of fit test was used to check model adequacy. It was observed that the quadratic model, which was controlled and proposed, was originated from experimental design data. The FBNM maximum adsorption capacity was determined as 59.8 mg g-1. Finally, developed method was applied to soft drinks to determine Ni2+ levels. Reusability of FBNM was tested, and the adsorption and desorption capacities were not affected after eight cycles. The paper suggests that the FBNM is a promising recyclable nanoadsorbent for the removal of Ni2+ from various soft drinks.

• International Journal of Reliability and Applications
• /
• 제13권1호
• /
• pp.19-35
• /
• 2012

This paper presents an optimum design of step-stress partially accelerated life test (PALT) plan which allows the test condition to be changed from use to accelerated condition on the occurrence of fixed number of failures. Various life distribution models such as exponential, Weibull, log-logistic, Burr type-Xii, etc have been used in the literature to analyze the PALT data. The need of different life distribution models is necessitated as in the presence of a limited source of data as typically occurs with modern devices having high reliability, the use of correct life distribution model helps in preventing the choice of unnecessary and expensive planned replacements. Truncated distributions arise when sample selection is not possible in some sub-region of sample space. In this paper it is assumed that the lifetimes of the items follow Truncated Logistic distribution truncated at point zero since time to failure of an item cannot be negative. Optimum step-stress PALT plan that finds the optimal proportion of units failed at normal use condition is determined by using the D-optimality criterion. The method developed has been explained using a numerical example. Sensitivity analysis and comparative study have also been carried out.

• 한국항공우주학회지
• /
• 제41권4호
• /
• pp.261-267
• /
• 2013

본 논문에서는 헬리콥터 전진비행 조건에서 플래핑모션에 대하여 축소 로터 실험을 통하여 실험결과와 이론적인 예측결과를 비교하였다. 축소로터 성능 실험은 충남대학교 아음속 풍동에서 수행하였으며 1.8 x 1.8m의 개방형 시험부를 사용하였다. 전진비행조건에서의 실험 결과에 의하면 축소로터의 전진비행조건에서의 추력 결과를 고정한 조건에서 동력계수는 차이가 있는 것을 확인 할 수 있었다. 또한, 공력 성능 측정 결과와 이론적인 예측결과의 비교를 통하여 헬리콥터의 플랩핑 각도의 범위에 대하여 비교하여 보았다. Coning 각도, 횡방향과 종방향에 대한 플래핑 각도에 대해서는 실험결과와 예측결과의 유사함을 확인하였다.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권12호
• /
• pp.377-384
• /
• 2020

Banking is very regulated by the government and even has to follow regulations issued by the Basel Committee on Banking Supervision, which regulates banking in the world. According to Basel III, banks must provide capital reserves called capital buffers. The purpose of this study is to examine the factors that determine capital buffer. Factors thought to affect the capital buffer studied consisted of profitability (ROA), credit risk (NPL), liquidity risk (LDR), capital adequacy in the previous period (CARt-1), management risk (NIM), and ratio of operating risk (OER). The population in this study is conventional banks listed on the Indonesia Stock Exchange, as many as 42 banks, with a sample of 40 banks taken by purposive sampling method with an observation period of four years with quarterly data (2016-2019). To test the hypotheses, regression panel data is used. After being tested, it turns out that the fixed effect model is better than the common effect and random effect. The results of the study with fixed effect models show that ROA, NPL, and OER significantly and negatively affect capital buffer. CAR_t-1 has a positive and significant effect on capital buffer, while LDR and NIM do not affect capital buffer.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.613-616
• /
• 2005

In general, the hollow jet valve, the fixed cone valve had been used for the urgency released or maintenance of the flow rate. Nowadays, the butterfly valve, the gate valve are applied in economic performance and operation maintenance more than the hollow jet valve, the fixed cone valve. However, in the case of butterfly valve, it should be required the strict application standard to the cavitation coefficient because the structural axis and disk were situated in pipe channel and the occurring the shock problem by Karman Vortex. And, the judgment data for choice were slight lowdown in water supply and drainage facilities standard or Japanese penstock technology standard, various standard of KOWACO etc. Therefore. there were investigated the valve inside phenomenon (cavitation, disk chattering, vibration) by velocity of flow and the stability examination of body by high velocity of flow through flow scale model test using the numerical analysis and PIV to establish the applicable extensibility of the butterfly valve for the urgency released valve.