• 제목/요약/키워드: Fixed detachable prosthesis

검색결과 9건 처리시간 0.017초

심하게 흡수된 하악골에서 fixed detachable prosthesis를 이용한 임플란트 지지 보철 수복증례 (Implant supported prosthetic rehabilitation of severely atrophic mandible with fixed detachable prosthesis)

  • 이학주;임영준;권호범;김명주
    • 대한치과보철학회지
    • /
    • 제55권2호
    • /
    • pp.180-186
    • /
    • 2017
  • 완전 무치악 환자에서 임플란트를 이용한 치료 방법은 환자의 삶의 질 개선에 크게 기여하였으나, 잔존골 상태나 경제력 등에 의해 임플란트의 식립 개수에 제한을 받는 상황이 종종 나타난다. 이러한 경우 일반적으로 임플란트 피개의치나 임플란트 융합 국소의치 형태로 치료계획을 세울 수 있지만, 정확한 설계를 바탕으로 양측성 캔틸레버 형태의 고정성 보철물 역시 고려해 볼 수 있다. 본 증례에서는 심한 치조골 흡수를 보이는 완전 무치악 환자에서 상악 총의치 및 하악 임플란트 지지 고정성 캔틸레버 보철물 제작을 통해 기능적, 심미적으로 양호한 결과를 얻었기에 보고하고자 한다.

도재치은 보철법에 의한 심미적 임프란트 상부구조의 제작 (The Esthetic Gingival Porcelain Restoration as Implant-Supported Fixed Prosthesis)

  • 이성복;이경호
    • 대한심미치과학회지
    • /
    • 제10권1호
    • /
    • pp.104-113
    • /
    • 2001
  • This article described a procedure for fabricating an esthetic gingival porcelain restoration as an implant-supported fixed prosthesis for edentulous maxilla. Alternative treatments for fully edentulous patients include an implant-supported overdenture or a fixed implant-supported prosthesis with bilateral distal cantilevers. But, from a functional and biomechanical point of view, the fixed implant-supported prosthesis with posterior cantilevers or implant-supported tissue-borne overdenture do not significantly improve masticatory effectiveness compared with a distributed implant restoration as a fixed implant-supported prosthesis. The fact that the prosthesis is supported by distributed implants over eight for edentulous maxilla in general, provides increased masticatory efficiency as a fixed restoration and similar gingival appearance with esthetic gingival porcelain. It is also detachable by dentist to allow easier after-care of soft tissue and the prosthesis.

  • PDF

Monolithic zirconia framework으로 제작된 fixed detachable prostheses를 이용한 심미적인 임플란트 전악 수복 증례 (Esthetic Full Zirconia Fixed Detachable Implant-Retained Restorations Manufactured from Monolithic Zirconia : Clinical Report)

  • 홍준태;최유성;한세진;조인호
    • 구강회복응용과학지
    • /
    • 제28권3호
    • /
    • pp.253-268
    • /
    • 2012
  • 수직적, 수평적 골흡수가 심한 환자에서 임플란트를 이용한 전악수복의 경우 경조직과 연조직 이식을 통해서 임플란트를 원하는 위치에 식립할 수도 있지만, 치은과 치아의 기능과 심미를 회복할 수 있는 fixed detachable prostheses를 대체 술식으로 사용할 수도 있다. 이러한 증례에서 다양한 재료가 수복물의 제작에 사용 가능하지만, metal/acrylic 보철물에서는 레진치아의 파절 및 탈락이 일어날 수 있고, metal/ceramic 혹은 zirconia/ceramic 보철물에서는 도재의 chipping이나 파절과 같은 문제가 발생할 수 있다. 이에 최근에 심미적이면서도 기능적인 보철수복을 위해 zirconia에 도재를 축성하지 않고 임상적으로 적용가능한 monolithic zirconia framework이 출시되어 사용되고 있다. 본 임상 증례는 심미적인 요구도가 높은 완전 무치악 환자에서 임플란트를 식립하고 chipping이나 파절의 위험을 감소시키기 위해 monolithic zirconia framework을 이용해 만들어진 complete fixed detachable 보철물을 이용한 수복에 대해 보고하고자 한다. 이번 증례에서 보철물은 심미적, 기능적으로 만족스러웠으며, 2년 간의 정기검사에서 임상적인 합병증은 보고되지 않았다.

Full mouth fixed implant rehabilitation in a patient with generalized aggressive periodontitis

  • Huh, Yoon-Hyuk;Shin, Hyung-Joo;Kim, Dae-Gon;Park, Chan-Jin;Cho, Lee-Ra
    • The Journal of Advanced Prosthodontics
    • /
    • 제2권4호
    • /
    • pp.154-159
    • /
    • 2010
  • BACKGROUND. Generalized aggressive periodontitis (GAP) is a destructive periodontal disease that can develop in young age. Only a few cases of full mouth rehabilitation, using dental implants, have been reported in a patient with aggressive periodontitis. CASE DESCRIPTION. This clinical report describes the treatment procedures and results of full mouth rehabilitation in a patient with aggressive periodontitis. After all teeth were extracted, 6 implants were placed in the maxilla and mandible, respectively. Fixed detachable implant prostheses were made. The patient was satisfied with the final results. She was followed for 10 months postloading. CLINICAL IMPLICATION. For a long-term success, continuous maintenance care is critical, as the contributing factors of the disease (such as immune factors or periodontal pathogens) may not be controlled adequately.

상악 완전무치악에서 지르코니아 framework을 이용한 임플란트 지지형 고정성 보철 수복 증례 (The rehabilitation of an edentulous maxilla with an implant-supported fixed prosthesis using a zirconia framework: A case report)

  • 변재준;장은선;공대룡;송주헌;이경제
    • 대한치과보철학회지
    • /
    • 제58권4호
    • /
    • pp.342-348
    • /
    • 2020
  • 우식 및 치주질환등의 여러원인으로 다수의 치아를 발거 후 안면 및 치조골의 해부학적인 변화가 일어난다. 상악의 경우 치조골이 치근의 방향과 경사로 흡수되고 잔존치조골이 짧아지면서 악궁의 직경이 감소하게 된다. 또한 비순각(Nasolabial angle)이 커지면서 입술의 지지를 상실하게 되어 안면의 심미성을 상실하게 된다. 이를 재건하기 위해 다양한 수복 치료가 제안될 수 있다. 무치악 환자에게 보철적 재건 방법 중 전통적인 총의치 치료가 선택될 수 있지만 환자의 대부분은 의치에 의한 통증과 불편감, 안정성 부족으로 자연치를 갖는 사람들보다 저작능력이 20%미만이다. 또한 의치가 신체의 일부가 아님을 인지하고 심리적으로 만족하지 못하는 경우가 종종 있으며 이를 위해 저작기능 향상과 유지, 안정 그리고 치조골을 보존 할 수 있는 임플란트를 이용한 가철성과 고정성 보철 치료가 다른 대안이 될 수 있다. 상악 무치악 부위를 위한 임플란트 치료방법 선택 시 심미성을 위해 보철물의 변연을 원치 않거나 적절한 입술 지지, 발음의 향상, 구개를 덮지 않아 환자에게 편안함을 주는 방법으로 임플란트를 이용한 fixed detachable prosthesis 치료를 선택할 수 있다. 본 증례는 상악 잔존치조골 흡수로 부적절한 악간관계와 입술지지를 잃은 무치악 환자를 대상으로 지르코니아 framework을 이용한 임플란트 지지형 고정성 보철 치료를 진행하였고 기능적, 심미적으로 만족할 만한 결과를 얻었기에 이를 보고 하고자 한다.

A COMPARISON OF THE MASTICATORY FUNCTION BETWEEN TWO DIFFERENT TYPES OF IMPLANT SUPPORTED PROSTHESES AND COMPLETE DENTURE FOR FULLY EDENTULOUS PATIENTS

  • Lee, Jae-Hoon;Kim, Woo-Hyun;Shin, Rie-Hye;Lee, Keun-Woo
    • 대한치과보철학회지
    • /
    • 제46권6호
    • /
    • pp.591-601
    • /
    • 2008
  • STATEMENT OF PROBLEM: The improvement in oral function and comfort from the dental implant appears to depend on the particular type of implant support used with the denture. The number and positioning of implants have an influence on the force transfer and subsequent stress distribution around implants. Nevertheless, a quantitative comparison has not been made between the types of implant prosthesis used with different materials compared to conventional complete denture. PURPOSE: The objective of this study is to assess the masticatory performance, bite force and impact of two different type of implant supported prostheses on oral health-related quality of life compared to conventional complete denture with GOHAI, validated oral-specific health status measures, the sieving method, and the Prescale Dental System. MATERIAL AND METHODS: From the years 1999 to 2006, a total of 30 completely edentulous patients in a single arch were selected from the Yonsei University Dental Hospital, Department of Prosthodontics and Implant Clinic in Seoul, S. Korea. Patients were divided into 3 groups of 10 each. Group HR was restored with fixed-detachable hybrid prostheses with resin teeth. Group FP had fixed dentures with porcelain teeth while Group CD had a complete denture. The masticatory performance was compared between 3 groups. RESULTS: The results showed a significant improvement in oral health-related quality of life with dental implants compared to a conventional denture in GOHAI comparison. Overall, implant prostheses showed a higher masticatory performance ($S_{50}$) and maximum bite force compared with conventional dentures (P < .05) but no differences between different implant supported prostheses (P > .05). CONCLUSION: Within the limitation of this study, the numbers of implant and material of implant prostheses does not appear to impact patient satisfaction, masticatory performance or bite force.

LOADED IMPLANT와 UNLOADED IMPLANT의 조직학적 비교 연구 (A HISTOLOGIC COMPARATIVE STUDY OF LOADED AND UNLOADED TITANIUM IMPLANTS)

  • 김영수;고재승;황성명
    • 대한치과보철학회지
    • /
    • 제29권2호
    • /
    • pp.1-16
    • /
    • 1991
  • In order to see the possible effect of the functional load-bearing after osseointegration of the titanium root form implant in dog a histologic study was conducted. One side of lower jaw was surgically prepared edentulousness and titanium implants were inserted. Some implants were functionally loaded through fixed detachable prosthesis and some are isolated and unloaded. The dog was sacrificed four months later and bone sections with implants were processed for histologic evaluation and the results were as follows ; (1) The bone to implant interface after four months of load bearing presented no mobility and no marginal bone loss radiographically and histologically. (2) The interface zone between compact bone and implant revealed a direct bone to implant contact and in some areas marrow tissue contacts were examined at the light microscopic level. (3) At the ultrastructural level the interface of surrounding compact bone matrix and implant, three types of superficial layers were found ; one with moderate electron dense amorphous granular substance layer, other with high electron dense fine granular substance layer, and another type of amorphous granular substance covered with high electron dense line of minute granules. (4) The osteoblasts in the marrow tissue neighboring implants and osteocytes in compact bone showed typical normal characteristics and in the marrow tissues some of lymphocytes and mast cells were observed. (5) The abscence of abnormal tissue reactions at a cellular level indicates a high degree of biocompatibility for the experimental titanium implant and basically no difference was found between functionally loaded and unloaded implants.

  • PDF

하악 임플란트 overdenture에서 anchorage system이 하중전달에 미치는 영향 (EFFECT OF ANCHORAGE SYSTEMS ON LOAD TRANSFER WITH MANDIBULAR IMPLANT OVERDENTURES : A THREE-DIMENSIONAL PHOTOELASTIC STRESS ANALYSIS)

  • 김진열;전영찬;정창모
    • 대한치과보철학회지
    • /
    • 제40권5호
    • /
    • pp.507-524
    • /
    • 2002
  • Load transfer of implant overdenture varies depending on anchorage systems that are the design of the superstructure and substructure and the choice of attachment. Overload by using improper anchorage system not only will cause fracture of the framework or screw but also may cause failure of osseointegration. Choosing anchorage system in making prosthesis, therefore, can be considered to be one of the most important factors that affect long-term success of implant treatment. In this study, in order to determine the effect of anchorage systems on load transfer in mandibular implant overdenture in which 4 implants were placed in the interforaminal region, patterns of stress distribution in implant supporting bone in case of unilateral vertical loading on mandibular left first molar were compared each other according to various types of anchorage system using three-dimensional photoelastic stress analysis. The five photoelastic overdenture models utilizing Hader bar without cantilever using clips(type 1), cantilevered Hader bar using clips(type 2), cantilevered Hader bar with milled surface using clips(type 3), cantilevered milled-bar using swivel-latchs and frictional pins(type 4), and Hader bar using clip and ERA attachments(type 5), and one cantilevered fixed-detachable prosthesis(type 6) model as control were fabricated. The following conclusions were drawn within the limitations of this study, 1. In all experimental models. the highest stress was concentrated on the most distal implant supporting bone on loaded side. 2. Maximum fringe orders on ipsilateral distal implant supporting bone in a ascending order is as follows: type 5, type 1, type 4, type 2 and type 3, and type 6. 3. Regardless of anchorage systems. more or less stresses were generated on the residual ridge under distal extension base of all overdenture models. To summarize the above mentioned results, in case of the patients with unfavorable biomechanical conditions such as not sufficient number of supporting implants, short length of the implant and unfavorable antero-posterior spread. selecting resilient type attachment or minimizing distal cantilever bar is considered to be appropriate methods to prevent overloading on implants by reducing cantilever effect and gaining more support from the distal residual ridge.