• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.31-33
• /
• 2012

Movable scaffolding has been used to work in high places. The scaffolding is economical and convenient to move to other places, but it has the risk of falling down. This paper proposes a fixed bracing system to prevent the falling down of a movable scaffolding, and evaluates its usability by making a small-sized model. Further studies of structural stability, safety, and economical efficiency is necessary to use the system practically.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2005.06a
• /
• pp.159-164
• /
• 2005

In this paper, we study some problems of the scheduling on the fixed area in a shipbuilding. The scheduling, constrainted a working area, is not easy to make a load balance and to operate a change of daily work plan. we proposed a block arrangement algorithm to make the load balance and developed a system used to operate the change of daily work plan.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.9
• /
• pp.1546-1554
• /
• 2003

Efficient layout in a fixed work volume reduces build time when multiple parts are built at once in stereolithography systems. An efficient algorithm is developed for 3D layout planning. And it reduces build time and increases efficiency of SLA system. Genetic algorithm is implemented to locate as many parts as possible in the fixed work volume. A 3D collision detection algorithm, k-DOPs Tree, is implemented for the fast evaluation of a layout plan.

• Journal of the Korea Society for Simulation
• /
• v.25 no.2
• /
• pp.75-81
• /
• 2016

By using simulation, fixed location production method and flow production method have been compared to improve the productivity of deckhouse preceding outfitting process. In this paper, we analyze that the suggested flow production system instead of fixed location production can improve productivity. In current preceding outfit production system which adopts fixed location production, where a block occupies an area and does not move until the work finishes. On the other hand, in improved flow production system, the block moves instead of workers and equipment. Though the output of two systems are almost the same when we did not consider the moving time and waiting time of blocks, the flow production will be better when the variability of task time will be reduced.

• Journal of the Society of Disaster Information
• /
• v.12 no.1
• /
• pp.10-18
• /
• 2016

This study presented a new NOS model through the following suggestions to apply the construction work planing and management to NOS(Network Operating System). First, This study presented CIMS(construction information classification system) reflected the characteristics of facility classification - functional component classification - functional component classification - work classification - resource classification. Based on this system. this study presented how to establish PMMB(performance measurement management baseline) with proposed master target equation which analyzed the trend of performance measurement management baseline and proposed work target equation which analyzed the execution results. Finally, this study presented NOS model that can be applied to fixed price method and cost plus fee method through the theoretical verification of executive performance analysis method.

• Steel and Composite Structures
• /
• v.21 no.5
• /
• pp.963-980
• /
• 2016

The jib system with middle strut is widely used to achieve the large arm length in the large scale tower crane and the deployability in the mobile construction crane. In this paper, an analytical solution for the out-of-plane buckling of the jib system with middle strut is proposed. To obtain the analytical expression of the buckling characteristic equation, the method of differential equation was adopted by establishing the bending and torsional differential equation of the jib system under the instability critical state. Compared with the numerical solutions of the finite element software ANSYS, the analytical results in this work agree well with them. Therefore, the correctness of the results in this work can be confirmed. Then the influences of the lateral stiffness of the cable fixed joint, the dip angle of the strut, the inertia moment of the strut, and the horizontal position of the cable fixed joint on the out-of-plane buckling behavior of the jib system were investigated.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.859-866
• /
• 2010

Generally, a fixed type guide-bush system is installed during machining miniature work-pieces with high precision in the multi-task CNC lathe. But a conventional guide-bush system does not provide a constant clamping force under the condition of varying work-piece diameters. It is important to maintain a constant clamping force for guaranteeing machining precision. This paper proposes a new guide-bush system with a pneumatic clamping device for the CNC Swiss-turn lathe to keep constant clamping force with changes in work-piece diameters. Through performance tests, new clamping system developed in the study showed better machining precision at the cost of a small increase in the temperature of the system than conventional systems due to an increase in the frictional heat and a change in the heat transfer route.

• Safety and Health at Work
• /
• v.2 no.2
• /
• pp.148-157
• /
• 2011

Objectives: Although compensation for occupational injuries and diseases is guaranteed in almost all nations, countries vary greatly with respect to how they organize workers' compensation systems. In this paper, we focus on three aspects of workers' compensation insurance in Organization for Economic Cooperation and Development (OECD) countries - types of systems, employers' funding mechanisms, and coverage for injured workers - and their impacts on the actual frequencies of occupational injuries and diseases. Methods: We estimated a panel data fixed effect model with cross-country OECD and International Labor Organization data. We controlled for country fixed effects, relevant aggregate variables, and dummy variables representing the occupational accidents data source. Results: First, the use of a private insurance system is found to lower the occupational accidents. Second, the use of risk-based pricing for the payment of employer raises the occupational injuries and diseases. Finally, the wider the coverage of injured workers is, the less frequent the workplace accidents are. Conclusion: Private insurance system, fixed flat rate employers' funding mechanism, and higher coverage of compensation scheme are significantly and positively correlated with lower level of occupational accidents compared with the public insurance system, risk-based funding system, and lower coverage of compensation scheme.

• Journal of applied mathematics & informatics
• /
• v.34 no.1_2
• /
• pp.61-73
• /
• 2016

In this paper, we consider the problems of convergence of parallel iterative algorithms for a system of nonlinear variational inequalities and nonexpansive mappings. Strong convergence theorems are established in the frame work of real Banach spaces.

• Nonlinear Functional Analysis and Applications
• /
• v.29 no.1
• /
• pp.113-130
• /
• 2024

In this work, we explore the existence and uniqueness results for a class of boundary value issues for implicit Volterra-Fredholm nonlinear integro-differential equations (IDEs) with Atangana-Baleanu-Riemann fractional (ABR-fractional) that have non-instantaneous multi-point fractional boundary conditions. The findings are supported by Krasnoselskii's fixed point theorem, Gronwall-Bellman inequality, and the Banach contraction principle. Finally, a demonstrative example is provided to support our key findings.