• 한국정보처리학회논문지
• /
• 제3권7호
• /
• pp.1803-1811
• /
• 1996

공동 작업 수행을 위하여 상호 긴밀하게 협력하는 분산 멀티에이전트 기반 구조상 에서 각 에이전트의 기능은 다른 에이전트들에게 전달되어져야 한다. 즉, 멀티에이전 트 사회 속에서 각 에이전트는 어떤 다른 에이전트들이 사용 가능한지, 그들이 어떤 문제들을 해결할 수 있는지, 그리고 그들과 정보를 주고받기 위한 방법은 어떤방법이 있는지 알고 있어야 한다. 이러한 특성은 공동 작업 수행을 위한 에이전트들간의 지역적 또는 광역적 상호협력을 제어하기 위하여 에이전트들 간의 통신방식을 요구한다. 본 논문에서는 컴퓨터 비서로서 개발된 분산 멀티에이전트 기반구조인 MASCOT 플랫폼 상에서 에이전트들간의 상호협력을 제어하기 위한 기법을 제시한다. 이를 위하여 프래 임 형태의 통신 패킷을 정의하였으며, 메시지 교환을 위한 프로토콜을 제시하였다. 또한, MASCOT 상에서의 에이전트들간의 상호협력을 제어하기 위한 통신 방식을 설명하기 위해 하나의 시나리오를 제시하였다.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.1-7
• /
• 2015

일반적으로 유리온실의 거터는 빗물이나 결로를 온실 밖으로 배출시키는 역할을 하는 구조물이다. 본 논문에서는 기존 거터를 개량하여 질량을 줄이고 온실의 온도차이로 발생하는 결로를 많이 담을 수 있는 새로운 거터를 설계한다. 개발할 거터는 CATIA로 설계한 후 ANSYS 구조해석과 ADAMS/Durability를 이용하여 Hot Spot해석을 수행한 결과를 바탕으로 설계하였으며, 거터의 성능을 개선하기 위해 거터의 형상, 결로의 배수, 강도 등을 고려하였다. 그리고, 개발할 거터는 설치 방법이 쉬운 결로받이 일체형 거터이며, 기존 거터보다 질량이 약 16.9% 감소하였으며 내구성도 약 10% 상향되었다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.457-462
• /
• 2012

Daylighting software is an important component to predict the performance of daylighting system in advance of a field demonstration study with installing them in buildings. PHOTOPIA is a powerful software to generate a candela distribution curve(CDC) of an active daylighting system like a tracking dish concentrator. With PHOTOPIA, a set of candela distribution curves was generated under clear sky conditions and different solar altitude angles. The candela distribution curves were then imported to RADIANCE for rendering and analysis on the daylighting performance of a tracking dish concentrator when it installed in a actual class room without windows. As a result, the daylight collection efficiency of the dish concentrator was 68.4% when we assumed that there was no tracking error. It was found that candela(cd) and total lumens(lm) increased with solar altitude rising, whereas the distribution angle was fixed. The illuminance uniformity on the work plane in the class room was relatively low, 0.12, while the illuminance uniformity on the area of $2.7m^2$ to which the light was illuminated was considerably high, 0.60. The maximum illuminance was 1,340lux with a solar altitude angle of 80 degrees.

• 한국실내디자인학회논문집
• /
• 제13권5호
• /
• pp.223-229
• /
• 2004

The investment scale of design project has been increased rapidly following the recent social and economical demand. The demand of user has been changed variously together with social background like the increase of interest for the high level information oriented society and environment. In addition, it is necessary for the experts like coordinator, architect, color expert, and light designer to collaborate in the interior design process. The expertise diverse areas should be related closely and collaboratively for the smooth processing. It is necessary for the design environment to be changed in order to exchange the information effectively within the proposed period by the variety fields' experts. It is a collaborative design in the design studio that the multi-members collect the related data, suggest the idea, and discuss closely, which makes a decision for the new design concept and design plan in the fixed time. It is necessary to make a new kind of communication media concept in the design process, where the multi-members participate, and the collaborative design is processed in physically simultaneous space or in the far distance such as it is done above. In this paper, it is investigated for the communication for the design and creative behavior to explain the collaborative work in the process of design. The characteristics of collaborative design and demand design environment are summarized in the background of this kind of the creative behavior concept. Especially, the communication media for increasing the process effectiveness is explained and the concept for the development of web based collaborative design system is summarized.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.709-713
• /
• 2009

Recently, a lot of research that applies data acquired from devices such as cameras and RFIDs to context aware services is being performed in the field on Life-Log and the sensor network. A variety of analytical techniques has been proposed to recognize various information from the raw data because video and audio data include a larger volume of information than other sensor data. However, manually watching a huge amount of media data again has been necessary to create supervised data for the update of a class or the addition of a new class because these techniques generally use supervised learning. Therefore, the problem was that applications were able to use only recognition function based on fixed supervised data in most cases. Then, we proposed a method of acquiring supervised data from a video sharing site where users give comments on any video scene because those sites are remarkably popular and, therefore, many comments are generated. In the first step of this method, words with a high utility value are extracted by filtering the comment about the video. Second, the set of feature data in the time series is calculated by applying functions, which extract various feature data, to media data. Finally, our learning system calculates the correlation coefficient by using the above-mentioned two kinds of data, and the correlation coefficient is stored in the DB of the system. Various other applications contain a recognition function that is used to generate collective intelligence based on Web comments, by applying this correlation coefficient to new media data. In addition, flexible recognition that adjusts to a new object becomes possible by regularly acquiring and learning both media data and comments from a video sharing site while reducing work by manual operation. As a result, recognition of not only the name of the seen object but also indirect information, e.g. the impression or the action toward the object, was enabled.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권4호
• /
• pp.330-343
• /
• 2016

This paper presents results of an experimental investigation of vortex-induced vibration (VIV) of a flexibly mounted and rigid cylinder with two-degrees-of-freedom with respect to varying ratio of in-line natural frequency to cross-flow natural frequency, $f^*$, at a fixed low mass ratio. Combined in-line and cross-flow motion was observed in a sub-critical Reynolds number range. Three-dimensional displacement meter and tension meter were used to measure dynamic responses of the model. To validate the results and the experiment system, x and y response amplitudes and ratio of oscillation frequency to cross-flow natural frequency were compared with other experimental results. It has been found that the higher harmonics, such as third and more vibration components, can occur on a certain part of steel catenary riser under a condition of dual resonance mode. In the present work, however, due to the limitation of a size of circulating water channel, the whole test of a whole configuration of the riser at an adequate scale for VIV phenomenon was not able to be conducted. Instead, we have modeled a rigid cylinder and assumed that the cylinder is a part of steel catenary riser where the higher harmonic motions could occur. Through the experiment, we have found that even though the cylinder was assumed to be rigid, the occurrence of the higher harmonic motions was observed in a small reduced velocity ($V_r$) range, where the influence of the in-line response is relatively large. The transition of the vortex shedding mode from one to another was examined by using time history of x and y directional displacement over all experimental cases. We also observed the influence of in-line restoring force power spectral density with $f^*$.

• 한국시뮬레이션학회논문지
• /
• 제26권2호
• /
• pp.31-39
• /
• 2017

본 연구는 무기체계의 단위비용을 고려한 K2(KC와 KAMD) 체계의 효과분석을 수행하였다. 단일 KC와 다중(고층 및 저층) KAMD를 가정하고, 각 체계에 임의의 무기체계를 설정하여 각각의 조합에 따라 총 12개의 시나리오를 작성하였다. 효과도는 전체 탄도미사일 위협 수량 대비 감소된 탄도미사일 위협의 비율로 정의하였으며, 비용은 발사된 무장의 수량과 단위비용으로 계산하였다. K2 체계의 효과도와 총비용은 몬테카를로 시뮬레이션을 1,000번 반복하여 추정하였다. 각각의 시나리오를 대안으로 하여 비용대 효과분석을 실시하였고, 효과고정법을 사용하여 최적 대안을 선정하였다. 연구 결과 KC 능력이 K2 체계의 방어 효과와 총비용을 결정하는 가장 중요한 요소였으며, 적정 수준의 저층방어체계를 갖춰야 요구되는 방어 효과를 달성할 수 있음을 확인하였다. 향후 연구에서 실질적인 무기체계 제원과 수명주기비용을 고려한 비용대 효과분석이 이루진다면 더욱 현실적인 분석이 가능할 것이다.

• 한국수소및신에너지학회논문집
• /
• 제23권5호
• /
• pp.530-537
• /
• 2012

This work experimentally investigates that Diesel-DME blended fuel influences combustion characteristics and emissions (NOx, CO, HC, smoke) in a single-cylinder DI diesel engine. Diesel is used as a main fuel and DME is blended for the use of its quick evaporating characteristics. Diesel and DME are blended by the method of weight ratio. Weight ratios for Diesel and DME are 95:5 and 90:10 respectively and the both ratios have been used altogether in blended fuel. The experiments are conducted in this study single cylinder engine is equipped with common rail and injection pressure is 700 bar at 1200 rpm. The amount of injected fuels is adjusted to obtain the fixed input calorie value as 972.2 J/cycle in order to compare with the fuel conditions. DME is compressed to 15 bar by using nitrogen gas thus it can be maintained the liquid phase. In this study, different system compared others paper is common rail system, also there is combustion and emission about compared DME and diesel fuel. It is expected to be utilized about blended fuel.

• 상하수도학회지
• /
• 제13권3호
• /
• pp.73-82
• /
• 1999

In this study, the optimal analysis for pipe network is performed for the combined ideal pipe network system(CASE 1, CASE 2 and CASE 3) which is composed of 25 nodes, 41 elements, and 1 fixed nodal head with evaluating pressure variation distribution of main and branch in grid composed drainage pipe network. The linear analysis technique used as the analysis method in this study, the KYPIPE being used extensively as the linear technique to design and analysis of pipe network is applied. Firstly, in the analysis of pipe network, the CASE 2 and CASE 3 supply same thing(value) in the result of considering the total flow provided each pipeline, but in the general intension in the case of CASE 2, relative width of supply is more large than CASE 1 and CASE 3. Secondly, in the analysis technique of pipe network, CASE 3 is analysed largest as a result of comparing with same heads, and in the order of their size CASE 2 and CASE 1 were determined but the difference doesn't appear to be obvious. Thirdly, as the result of determining main factor, pressure in the design and analysis of net work. CASE 3 is from Node 3 to 25 than CASE 1 and CASE 2 and it is determined in the order of their size, CASE 2 and CASE 1. Finally, in this study, discharge flow distribution is evaluated in the same condition with 3-type CASE in the case of branch position for designing optimal composed drainage pipe network. As the result of that, branch pipe perform. Therefore, it is thought that the efficient and reasonable management of water supply and sewerage design will be possible if it give all our energies to study at the pipe system design in and out of country in the future.

• 한국국방기술학회 논문지
• /
• 제5권1호
• /
• pp.7-18
• /
• 2023

군 지휘관은 전투 임무 수행을 위한 작전계획을 수립한다. 작전계획 수립을 위한 현행 교리는 야전의 악조건 하에서 사람의 노력으로 수행 가능하도록 간단명료한 절차와 방법을 사용하도록 하고 있다. 작전계획 수립 과정의 작업은 의사결정의 연속이라고 할 수 있는데, 의사결정의 기준은 대체로 임무변수를 적용한다. 그러나 세부적인 기준은 교리로 고정시키지 않고 창의적으로 수립 적용하도록 하고 있다. 그러나 인공지능 기반의 의사결정을 위해서는 기준들과 사용되는 양식을 정형화할 필요가 있다. 본 논문은 우선 각종 기준들과 양식을 정형화하여 반자동화된 보조시스템에서 사용할 수 있는 방법을 제시하고 이를 인공지능화하기 위한 방안을 모색하고자 한다. 이를 위해 운영분석 분야에서 정립된 수학적 모형과 의사결정 방법들을 적용하여 능률성을 제고시킬 수 있도록 하였다.