• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.10a
• /
• pp.306-313
• /
• 1998

Contrary to reinforced concrete frames, the beams or girders found in actual steel frames are neither hinged nor fixed at their ends. Instead, they are usually restrained by the columns to which they are attached. Here in this paper, common finite element program for plane frame stress analysis is improved by including the effect of partial fixities of the girder ends. To include the effect of partial fixities of the girder ends, Kim's modified slope-deflection equation is adopted. The stress analysis results obtained by this proposed method are then compared with Kim's example. Finally, method of choosing the most economic girder section for a multi-story frame is suggested through the examples.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.220-220
• /
• 2009

In case of favourable irradiation conditions, the ratio of irradiation to the total irradiation went up and then the irradiation increased in the area with high angle of inclination. The study showed that on a clear day with the irradiation of more than $800[W/m^2]$, the pattern of alternating current power change in the fixed system was similar with that in the single-axis tracker. On the contrary, in case of unfavourable irradiation conditions, the ratio of diffuse irradiation to the total irradiation went up and then the horizontal irradiation increased. In the demo system, the fixed system, the single-axis tracker and the dual-axis tracker all had low generation power and similar generation pattern with each other. The study showed the generation power varied with the irradiation in the fixed system, while in the single-axis tracker and the dual-axis tracker, the amount of the generation power variation was much more than the irradiation variation. The demo system was operated from 11:00 AM to 2:00 PM for generating power, during which time, 46[%] to 56[%] of the total generation power was produced. In this study. the generation power was increased by 147[%] in the fixed system, by 136[%] in the single-axis tracker, and by 164[%] in the dual-axis tracker, and the pattern of generation power was similar with the generation power variation in the situation where the irradiation increased by 140[%] in the spring with plenty of insolation. The alternating current power was more sensitive to variation of the irradiation than to that of the surface temperature of a module. The variation of the irradiation had a more positive effect on the generation power than the type of array.

• Korea Journal of Hospital Management
• /
• v.19 no.4
• /
• pp.57-68
• /
• 2014

Since the introduction of National Health Insurance(NHI) in 1977, it has grown rapidly and contributed to extend patient's access to the health care services. However, limited coverage for health care services of NHI has been ongoing challenge and private health insurance(PHI) has been rising as an alternative source of enhancing coverage and saving out-of-pocket(OOP) expenditure for patients. In this study, after controlling for socio-demographic, economic, health related variables, we identified the patients' healthcare utilization and subsequent OOP expenditure depending on their PHI enrollment and their enrollment types(fixed benefit, indemnity, fixed benefit plus indemnity). Data were collected from the 2010 Korean Health Panel. The unit of analysis was a member of household(n=13,324). Of the 13,324 cases, 70.7% of patients held PHI, in detail, fixed benefit(47.0%), indemnity(3.6%), fixed benefit plus indemnity(20.1%). Major findings showd that patients who enrolled in PHI used more outpatient services(outpatient visit, number of physician visit, number of examination) and spent more OOP expenditure than non-PHI patients. There were also differences of healthcare utilization and OOP expenditure among the types of PHI. In addition, PHI patients used more inpatient services(inpatient use, number of hospitalization, LOS), but there was no significant difference between PHI and non-PHI patients with regard to the OOP expenditure. Thus, we could not find any distinct relationship between the types of PHI and patients' tertiary hospital use. Policy-makers should need careful political deliberation for monitoring the effect of PHI on health care utilization and subsequent expenditure not only to improve patients' coverage but also to save their OOP expenditures.

• Progress in Superconductivity and Cryogenics
• /
• v.11 no.1
• /
• pp.49-54
• /
• 2009

This paper presents the numerical simulation results on the moving type electrodynamic suspension (EDS) simulator and static type EDS simulator using high-Tc superconducting (HTS) levitation magnet. The levitation force of the EDS system is formed by the reaction between the moving magnet and the fixed ground conductor. The possible two ways to simulate the EDS system were simulated in this paper by using finite element method (FEM). The first way was the moving type simulator which consists of the fixed HTS magnet and the moving ground conductor. The second way was the static type simulator which consists of the fixed magnet, the fixed ground conductor and the ac current supply system. To verify the characteristics of high speed EDS system with the moving type simulator heavy, large and fast moving ground conductor is needed. The static type simulator can get the characteristics of the high speed EDS system by applying equivalent ac current to velocity, therefore it does not need large moving part. The static type EDS simulator, which can consist of an HTS magnet, the fixed ground conductor(s), an AC power supply and the measuring devices, also test the effect of the shape of the ground conductor easily. The plate type ground conductor made stronger levitation force than ring type ground conductor. Although the outer diameter 335 mm ring type ground conductor (Ring3) was larger than the outer diameter 235 mm ground conductor (Ring2), the levitation force by Ring2 was stronger than that by Ring3. From the calculation results on this paper, the consideration of the magnetic flux distribution according to the levitation height should be included in the process of the ground conductor design.

• Health Policy and Management
• /
• v.28 no.2
• /
• pp.128-137
• /
• 2018

Background: This study aims to utilize Organization for Economic Cooperation and Development (OECD) data to identify macroscopic determinants of health at national level and to utilize it in health policy development through comparison and analysis with Korea. Methods: The potential years of life lost (PYLL) were used as dependent variables and 19 indicators were selected as health determinants to be independent variables based on the results of previous studies. Data analysis was done using SAS ver. 9.4 package (SAS Institute Inc., Cary, NC, USA) and model used in technical statistics concerning PYLL by countries, multi-linearity test between independent variables and OECD economic studies were modified and used. Results: From 1994 to 2012, the average PYLL for OECD countries was 4,262.9 years, the highest in Estonia and the lowest in Iceland. As a result of the analysis using the fixed effect model, the significant variables affecting PYLL were four variables: gross domestic product, nitric oxide, tobacco consumption, and number of doctors. The health determinants that had more influence on the PYLL of Korean people compared to other OECD countries were tobacco consumption, calorie consumption, fat intake and total health expenditure. Conclusion: In order to effectively reduce unnecessary deaths, we must continue to strengthen our smoking policy and nutrition policies such as calorie and fat intake. It is necessary to prevent the increase of total health expenditure due to the increase in the prevalence of chronic diseases and to strengthen the public health aspect.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.4
• /
• pp.512-521
• /
• 2018

Islands that is far away from onshore have used internal-combustion engine driving alternators to secure electric power. However, with Paris convention on climate change, there is a growing interest in eco-friendly energy independent island that replaces microgrid(MG) consisting of photovoltaic, wind power, and energy storage system with alternators for internal combustion engines. And also, national emission trading has been implemented, and the price of certified emission reduction(CER) has a influence on system marginal price(SMP). Because, the low cost generation source decides SMP when CER price is low, while the more expensive generation source decides SMP when CER price is high. Therefore, the increasing of CER price has a strong influence on the annualized return of MG independent power producer. Moreover, the fixed RPS price is implemented from 2017, which the increasing of CER price under the fixed RPS price or the variable RPS price affects annualized return differently. In this paper, the annualized return according to CER price is analyzed for large, middle, and small scaled islands, the effect of CER price on the annualized return was confirmed.

• International Journal of Highway Engineering
• /
• v.14 no.5
• /
• pp.123-132
• /
• 2012

PURPOSES: This study is to investigate the consideration which relates with a disaster from route alignment process and proposed the method it will be able to evaluate a disaster danger fixed quantity. METHODS: Use the landslide disaster probabilistic map of GIS based and in about landslide occurrence of the route alignment at the time of neighboring area after evaluating a risk fixed quantity, it compared LCC expense in about each alternative route. It developed the system it will be able to analyze a LCC and a disaster risk in about the alternative route. In order to verify a risk analytical algorithm and the system which are developed it selected national road 59 lines on the demonstrative route and it analyzed a disaster risk. RESULTS: Demonstrative route not only the disaster risk to be it will be able to compare a disaster risk fixed quantity like the economical efficiency degree in compliance with LCC expense productions it compared and there being the designer will be able to decide the alternative route, it confirmed. CONCLUSIONS: Roads can be designed by considering occurs repeatedly landslides and debris flow caused by disasters in advance and expect to be able to effect that can reduce the overall cost to recover losses caused by the disaster, and temporally loss is expected.

• Journal of the Korean Institute of Gas
• /
• v.8 no.4 s.25
• /
• pp.42-49
• /
• 2004

We study on and simulate the behavior of one-step fixed bed reactor which synthesize DiMethylEther(DME) from Methane. At last, we know that reaction is decreased in case of excess and no cooling because the temperature of reactor is decreased or increased seriously. Also, we study on optimizing the reactor so that we know the optimized operation condition according to cooling effect, space velocity of reactant and temperature of reactant, etc.

• Journal of Korean Society of Rural Planning
• /
• v.27 no.2
• /
• pp.69-76
• /
• 2021

This study focuses on the relationship between ginseng production per area and meteorological factors. Four areas of major ginseng production are considered in the study. Chungcheongnam-do and Gyengsangbuk-do are selected as the original major production places and Gyeonggi-do and Kangwon-do are selected as the new major places. The meteorological factors applied for study are the average temperature, accumulated precipitation, and integrated sunshine hours. With the data collected across four areas, we used a panel data analysis. From the results of Hausman test, the fixed effects model allowing to control individual area effect is preferable to the random effects model. Based on the results of the fixed effects model, the accumulated precipitation statistically and significantly affect the decreases in ginseng production. Changes in the average temperature negatively affect ginseng production, but the value is not statistically significant. The integrated sunshine positively affect ginseng production, but the value is not statistically significant.

• Health Policy and Management
• /
• v.13 no.3
• /
• pp.129-147
• /
• 2003

This study is to grasp a trend of profitability classified by characteristics of hospitals and to analyze related factors. Subjects are 145 hospitals which have gotten the standardization audit by Korean Hospital Association during 1998-200l. Profitability was measured in the aspect of operation profit rate with operating margin to gross revenue as proxy variables. Independent variables were classified by general factors (ownership, number of beds, period of establishment, competition), financial factors (liabilities to total assets, current ratio, fixed ratio, total asset turnover, inventories turnover), and factors related to patient treatment (average length of stay, bed occupancy rate, new outpatient ratio, admission ratio of outpatients, number of patients per specialist, personnel costs per adjusted inpatient, administrative costs per adjusted inpatient). Hierarchical multiple regression analysis model was used in this study. As a result of hierarchical multiple regression analyzation of operating margin to gross revenue, adjustive $R^2$ of general factors was relatively more powerful. The factors had significant effect on operating margin to gross revenue were ownership(+), number of beds(+), competition(+), current ratio(+), fixed ratio(+), total asset turnover(+), personnel costs per adjusted inpatient(-).